Well, I was thinking about getting some new rims, possibly 16" and putting P225 or P235 on them.. But while doing the standard rotation it became apparent (large ass nail) that I'd have to take them in and get a patch. That combined with some deep cracks in the rubber and one little bit of cord...

I've been poking around eBay and I found this: <URL:http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4562375098&category=42606&rd=1> He's selling a 1948 CJ frame with running gear. Just for fun, does anyone know if a MB body would bolt up to that frame? Yes, you'd end up with a...

The 76 CJ-7 is almost ready. The engine (AMC 360) is installed and running well. I only have a few small things to fix/adjust. One particular thing has been a real thorn. The original alternator on this has obviously been changed because it was switched over to electronic ignition a while...

I have to ask myself if it will every really be finished. There will always be something to fix, buy, adjust, or re-arrange. Anyway, it's on the road. Sometime it will get new paint. I want to arrange the plug wires. I have seen a few items to do it. Some are adjustable that bolt on using 2 of...

The three local stealerships do not stock wires for my 1987 Wrangler (4.2). I'll agree to pay their prices for the convenience, but because they don't stock them for me, I won't pay top dollar. Rather than pay them to special order them, I'd rather order them on-line. Anyone got a good source for...

Went and visited my sick Jeep today and tried to figure out where the noise was coming from. The stethoscope trick was a great idea, but didn't really tell me much... the noise seemed to be a little louder at the top of the engine but not by much, and where it's really noticeable is underneath......

My wife drives the Cherokee 95 Country and she twice now has said she hit a bump and the whole thing shook violently. She said she had to stop at the side of the highway (complete stop) and then she could proceed. I drove it and it seems a little 'coarse' (not as smooth or sloppy over bumps as I...

My 89 YJ has got a dent in the driver's side fender, right behind the wheel. The hood and door are undamaged. The dent came with the Jeep, the Jeep also came with a new fender and flare. How hard is it to swap the fenders? What engine components are mounted to the fender? Thanks, Carl

When I get my block back from the shop, I'm thinking about making a modification to it to assist in the engine oiling and oil pressure. Granted, the condition of the bearings did not help the situation but, I do not want to have a freshly rebuilt engine and no oil pressure. Before I pulled the...

anyone ever seen one or know its use ect. e-bay.com 6194295125 copy and paste and e-mail me. thanks

Well, it is now that I dropped a can of dr-pepper. First time I've ever seen a sodapop can go vertical just like the Apollo launches. Sheesh, what a mess. ...mop.. ...bucket.. ...hose.. :)

I'm trying to locate a guy that has a blue CJ-7, that says "Binford Tools" on the back.

I would like to thank DougW for all his help. The Camshaft sensor change went well, the wrangler started right up. Took it around the block it coughed and stuttered then shut down. This time it did start right back up though. I have no idea what could be the problem now. I don't think its...

91 JEEP CHEROKEE REPLACED ALTERNATOR AND NOW IT OVER CHARGES THE VOLT METER IS AT 18 BATTERY DOES'NT GET HOT I CHECKED WIRES FOR CUTS ANY HELP WELCOME THANKS

Is the gas price high enough for you guys, or can you stand more before you decide to get right with Mr. Compression Ignition?

Greetings. I have a 92 YJ 4.0 with 31s on it. I bought it with 120K and have put maybe 5K more on it. Yesterday I thought it would be a good idea to take it down I-80 for a weekend visit to a town 3 hours away. Unlike most Wyoming 1-80 days it wasn't TOO windy, but the Jeep was having a hell of a...

Here's the 76 CJ-7 (AMC 360 and running) I have to ask myself if it will every really be finished. There will always be something to fix, buy, adjust, or re-arrange. Anyway, it's on the road. Sometime it will get new paint. I want to arrange the plug wires. I have seen a few items to do it. ...

I recently traded in my 1997 Jeep Grand Cherokee Laredo on a 2004 Jeep Grand Cherokee Limited. I've taken my old Jeep up on Silver Lake Sand Dunes in Michigan, and had everything figured out. Now I've got to learn about my new Jeep. It is a High Output 4.7L V8, where my old one was a V6. I need...

Guys, I can't believe I"m doing this, but I"m actually trying to sell my baby. I've had this thing for more than ten years, some of you know it as the blind spot. The list of parts/mods and upgrades is a mile long. Let's just say it has well over 40 grand into it not including time and labor. ...

-- Coasty SEMPER PARATUS (ALWAYS READY) Remove The SPOOGE To Reply