Hello. I have a 2006 Wrangler X with the 6-speed manual tranny and Dana 30 in the front and 35 in the rear with the 3.07 gearing. I will be putting a 3.5 inch Rubicon Express lift on it with 33 X 12.5 tires. Here is the question that I am not sure of: My stock rims are 15 X 7. I know I need a...

I've got a '99 TJ Sport with an 8000lb Champion winch on the front mounted into the stock tow hook holes. Will the double-tube hoop bumpers fit with the winch on (such as the Smitty Bilt ones)? Any I should avoid for sure? Any that fit for sure? Thanks!

My dad has a 93 Cherokee Sport 4.0 L, 135K in good condition. We are both Jeep owners. His Jeep started dying after about 15 minutes of running. The ignition turns on, all power to everything, the jeep turns over, but will not start. He replaced a broken heater hose several days ago and now...

I have a 2002 TJ 6 cylinder and I need to disconnect the fuel line at the fire wall. Does anyone have a procedure on how to do this. How does the quick disconnect come off? If it is removed do any new parts have to be replaced on the connector or will it be ok? When I remove it, how much gas...

Just wondering my 04 TJ came with ATF+4 in the power steering system and my wife's 04 WJ came with Power Steering fluid why, can ATF+4 be used instead? -- Coasty

You remind me of a little rat dog, like the Mexican Chiwawa, with its senseless barking it's rabid head off, me too, me too. And par. it's too afraid to use it's name, address, or even sign your statement as any responsible person would, totally worthless! Crawl back in your hole, like the rest of...

My jeep is about to turn 60,000 miles, and there is a bunch of routine service stuff recommended in the manual, such as changing transmission fluid and differential fluid. That much is fine and dandy, and I'm going to hire the local jiffy lube to just change all the fluids and things that need...

Some years back I had a '47 CJ2A, and am currently considering getting another (a '48). My recollection is that the stock gearing was somewhere around 5.13 or so, and I'm wondering whether it's possible/feasible to replace those with maybe a 3.08 or even 2.73 set for better mileage and the...

We are currently breaking a range rover classic vogue se 3.9 1993, all parts available. Please email or ring 01332 386507 or 07763 403864. Many thanks, Ian.

Anybody running 32 inch tires with an OME 2.5 inch lift? Any rubbing issues? Thanks, Neale

Hello, Can anyone point me in the direction of a complete conversion guide for a '90 YJ? I'm kind of new to it all, but I'm hoping to upgrade the following, along with anything else required to do so: -locking differentials (do I need these for both front and rear?), also probably axle...

Just bought an '03 Wrangler and drove the 1000 mile journey home with no instrument panel lights (Headlights, tail lights, gauges and warning lights all work fine). After googling the issue, I proceeded down the path of tracing out the issue. - Fuses were all ok (replaced them anyway) - Bulbs work...

Does any one know how to reeplace the window wipes (lower window seals) on a Grand Wagoneer? Do I need any special tools?

Hi, I have a '53 M38A1 with what seems like a very "diagnosable" issue. The engine was rebuilt about 3 years ago and has a the correct carb. I leave it in MA during the winter, so it sits for about 8 months at a time before being driven again during the summer. On to the symptoms: The car was...

I've got a couple of fuel pressure regulators for sale that used to be on my Mopar MPFI conversion kit. I no longer need these since I converted to a 96+ regulator (single fuel line to the engine). The first is the stock regulator for $10 OBO. I ran with this for about two...

I've replaced my '82 Scrambler front seats, but the old ones are not that bad. They're about 9 or 10 years old. Note that two of the bolts have snapped off on one seat, and one bolt has snapped off...

Archie Leach > wrote in : > Aratzio > wrote: > >>On Tue, 28 Aug 2007 10:00:45 -0500, in alt.usenet.kooks, Archie Leach > bloviated: >> >>>Well, the major ass-kicking in this case has been done by...

I've been upgrading stuff on my '82 Scrambler, and I've got some parts left over that someone can have. I'm posting here a day before I post to the free lists. 1) Metal fairlead for a Warn winch: http://webpages.charter.net/michael.white/fairlead.jpg 2) Pair of original hub locks with almost...

Peter J Ross wrote: > In rec.arts.poems on Thu, 16 Aug 2007 21:16:43 GMT, Archie Leach > > wrote: > >> Peter J Ross > wrote: >> >>> In rec.arts.poems on Thu, 16 Aug 2007 21:05:29 GMT, Archie Leach >>> > wrote: >>> >>>> Peter J Ross >...

Well, the shop got the new track bar today, they went to put it on, and low and behold my Currie steering is also bent. Tie rod is bent out (away from the axle), drag link is bent, like you would expect, at the joint where the tie rod attaches. Now what? Who's is better than Currie? -jenn