I saw the new GC with the 5.7? L Hemi when my 02 GC was in for service recently (recall on the gas tank). Has anyone tried these out yet? The one in the showroom was decked out and it had about a $40k sticker on it.

I have a problem with my Jeep. When driving yesterday it started to miss. It was much more harsh then a single cylinder missfire, when it would miss, the passenger could hit his head on the dash. I had to stop several times to on the way home. This has happened on tow occasion beore. The first...

I want to do a compression test on my 258 before I re-install it (I'm doing a complete rebuild). The engine was advertised as being rebuilt about 10K before I bought it (I've added maybe 3k), but then again the PO also said the frame and body were in "good shape".... (did I mention I'm doing...

Matt Osborn did pass the time by typing: > My dealer showed me an oil leak along the passenger side of the engine > and said my head gasket needed to be replaced. He also said that DC > had redesigned the head gasket to prevent these leaks fro the oil > galleys. > > My 2000 TJ has just over 98K...

P.C. has gone to the extreme, but as with most things, the pendulum swings back the other direction a bit. Hopefully. Dave Milne wrote: > Amazing. I never quite understood the dichotomy in America between the free > spirit and tolerance I encountered on one hand, and > the political correctness...

Another TJ broken axle, donated by "GI Joe" Berinzger: http://www.billhughes.com/Joe_Breaks_Axle.mpeg (14 Meg) God Bless America, ßill O|||||||O http://www.billhughes.com/

Be glad, Jeep lovers, DCX and not Ford got Jeep , and FORD got some others...too bad for them. If Ford is so great, let them introduce their own Wrangler-like product with horizontal and not vertical bars. Ford isn't so great. The V8 flathead with its three exhaust ports was a piece of dog poop...

Another TJ broken axle, donated by "GI Joe" Berinzger: http://www.billhughes.com/dana35c/Joe_Breaks_Axle.mpeg (14 Meg) God Bless America, ßill O|||||||O

I liked it the last four times, too: http://groups-beta.google.com/group/rec.autos.makers.jeep+willys/search?group=rec.autos.makers.jeep%2Bwillys&q=http%3A%2F%2Fwww.ok4wd.com%2Frprofile.asp%3Fid%3D222&qt_g=1&searchnow=Search+this+group God Bless America, ßill O|||||||O ...

I have 300 miles on my '05 Grand Cherokee with the Hemi. It is hard to pin point but it does not run right, while at steady speed with a little throttle it bucks and thrusts. Also it vibrates. I have not taken it to the dealer yet, maybe tomorrow. I am a heavy equipment mechanic, so I know it...

Hi, all... I've had 4WD drive vehicles before, but they've all been equipped with manual hubs, so I hope you'll pardon my ignorance on what is probably a very simple topic. I just bought a 1996 Cherokee, the first I've ever owned. It's got an auto tranny (so my girlfriend can drive it), the...

I'm looking for a set of snow chains for my 2000 Cherokee 2WD. I haven't seen any online. Actually I don't want buy online, just searching through the major retailer sites to see what's out there and I haven't found anything. Anyone have any suggestions?

Dave, Any recommendations for cleaning a white hard top? Ours badly needs a cleaning. Did the Comet/Wire Brush combo work out for you? Thanks in advance! Jer Dave Morrison wrote: > Im just about to purchase my first jeep, an 81 CJ-7, that has a white

Need 5 old school aluminum slot mags like the American Racing INDYs. Manufacturers may also include, but not limited to: Ansen, US, ET. Sized 15x8 or 15x8.5 with a CJ Jeep/Ford 5x5.5" pattern for a 4WD. Please email what you have with price and don't forget to remove the spambait from my email...

I'll second this! Nicely put. jeepindaveva wrote: > you guys sound like a bunch of old ladies. i try to wave at fellow > jeepers, somtimes my hands are busy. i also make more effort to wave at > the customized Jeeps. I tend to only wave to the stock jeeps if they wave > first. so basically if...

Hi All, Finally the weather gave me enough break to do the body lift and motor mount lift. Body lift went okay (except for the front grill bumpstop extensions which required taking light bezels off - part not included in the instructions). Motor mount lift on a 4.0L with air-con is a big...

oil leak with the 4.0L 1990 Cherokee continually drips oil I have changed the pan ,valve cover ,distributor gaskets and the rear main seal the oil filter is ok as is the head gasket PCV is ok too It seems to be the oil pan or the rear main seal but the are in the same place -so how can I tell...

Can anyone give me any info on 4wd rental on the Big Island? Here is what I have found so far: http://www.harpershawaii.com/4wd.html They claim to be the only car/ truck rental company that allows rough road use. Any pointers or advice? I am planning on a 2 week visit next summer with my wife...

Can anyone tell me what a 5, 5 engine trouble code means on a 93 wrangler 4.0 ? Thanks Ron 93YJ

I have an '89 4.0 Cherokee Pioneer. I have been having an idle problem for some time. Sometimes, first thing in the morning, or after work on my way home, when I start it, it will idle way up at 2500 rpm for a while until I shut it down and try again. Sometimes (usually in the summer) parked in...