Ford Motor Co. will charge a premium of around $700 for its much- touted EcoBoost engine system when it goes on sale in 2009. A 3.5-liter V6 with EcoBoost will arrive next year on the Lincoln MKS sedan and Ford Flex crossover. The V6 with EcoBoost is slated for the Ford F-150 in 2010, and...

As you know by now, an EcoBoost 4-cylinder motor is coming to the Mustang lineup. With it becoming the new base motor, with 247-250 horses, will it lure in the economy-minded, style-set and/or the tuner types? 1) Economy minded? If this motor can give the Explorer 28 highway, in a Mustang it...

I bought a '69 Mach 1 with an Edelbrock avs thunder series 650 cfm carburator #1806. I need to tune it but I don't have the guide. Can someone please email me a copy of the tuning graph with the corresponding rod and jet chart. I was hoping Edelbrock had a PDF of this but no luck. Thanks in...

I have not posted or lurked here in ages... Anyone hear ever go with the Edelbrock Victor Jr. Intake Manifold on a 4.6 ??? I recently set my 2001 up with one along with a 262 cam and ported PI heads.. It took a lot of doing to get it done properly. Had to bend my own plumbing to work with the...

I posted this couple months ago but didnt get any replies. 89 GT 5spd. Just got subframes on yesterday, this summer, mini starter and high flow fuel pump are done. Ive got the Edelbrock performer top end on my 69 351W (cylinder heads, cam, intake) and really like it. But I havent seen a lot of...

I see many EEC-IV error code scanners which would blink the error code in a LED. Useful up to a certain point. In the VW-universe, there is the VAG, which is a software you can run off a laptop and a cable to connect to the car to find out what it is up to, including while the car is running. And,...

All - Like I mentioned a while ago, I bought a complete 1994 SVT Lightning EFI 351W engine for my '68 coupe. It's going in in about a week, but my mechanic says that he thinks I need to send the wiring harness off to be modified to work in the '68 coupe. Since I am using the C4 transmission for...

ok heres the deal....i am putting in a 93 5.0EFI motor into my 70 mustang and i need help finishing it up....i need to find the O2 Sensor part of the wiring harness and i also need to find the Fuel pump Wiring harness that links into the main wiring harness....also is there anyone in the bay area...

Have a blown 393" 86 Mustang. Has 750CC or 72 lb/hr injectors like these: http://injector.com/specs/05750PI.pdf Mine are really not that number, they're marked 3145, and 3-184-80897. Can't find anything on them. My problem is: It's not happy at idle. Electromotive, they built the control, is...

I have a code: Insufficient flow to EGR. Do I need to just clean the EGR? Replace it? Any help would be appreciated! Thank you, Don Manning

So I cleaned the EGR on the 01 4.6 Liter Crown Vic. Light stayed off for a day then came back on. I replaced the EGR and the light stayed off for a day, and then came back on. Kind lost as to where I need to go from there. Thank you, Don Manning

Is there an aftermarket replacement for the EGR valve (Ford PN F3SE-9F483-A4A A59)?

I got the eibach pro-kit lowering spring. it lowered the car and looks nice, but the rear right is not lowered as same as the other three. they are lowered about 1.2 inch, but that one is only 1 inch. i checked the rear springs and they were put same way. could that be the shock or that's normal!...

Thinking of purchasing Eibach springs (Sportsline) for 02 Gt. Any feedback,pros or cons.Also are a new sit of caster camber plates absolutely necessary,I already have the extended ball joint kit as well as the Rack and pinion bushings (Ford parts from 05 catalog) Any advice appreciated.......Snow...

Im going to be buying a 4 barrel carb for my stock 289. Is a edelbrok 500cfm to much carb for a stock 289? Should i go with an electric choke or manual?

Is this a common idea? Im wondering how it would fit over the water pump. These guys have been growing thier operation over the years and looks like their doing ok, they custom make all the parts needed for mad max replicas even functional switch operated supercharger! To bad the cars are...

I've got a 70 mustang.... I want to install an electric fuel pump for my new motor. Where's the best location? I've been told it needs to be below the tank. All replies appreciated. Thanks...

How can you test the windshield wiper motor and the fan motor for problems on the bench befroe installing them?

For those of you who remember the film "Mad Max" and his ability to power up his supercharger on demand, seems it could happen soon with the introduction of an electric-powered turbo. http://www.leftlanenews.com/bmw-files-patent-for-electric-turbocharger.html Patrick

I thought I had a dying battery. The car would intermitently not start. Now won't start at all. Mirror lights only go on dimly and when igitiion is turned on mirror lights go out completely. I replaced battery and pos cable that was deteriorated. Any additional advice on what to check...