I see the '06s will come in Standard-Deluxe-Premium trim for both 6 and 8. do I smell a price increase? "prices start at about the same price as last year".....yeah, a stripper costs just a little more than a loaded one did last year........betcha

Well, my '98 3.8 six-cyl. takes three or so tries to start when cold....If temps overnight are moderate, it's not an issue. After about a month of getting frustrated with that, I got an check engine light, which reported a half-lean condition. Not sure if they were related or not. Did some...

I'm in the process of restoring a 70 Mach 1 and want to spray it Grabber Orange. Does anyone know of a modern paint code that is a close match? What are your opinion on metallic paint on vintage Mustangs?

I just got this car from her original owner last week. But today, when I tried to open the door with the key (instead of the key fob), it didn't work. The weird thing is, I could open the trunk and start the engine with this key, but just couldn't open the door with it. Anyone has any idea about...

Time for some new front pads...Raybestos or Hawk? Never tried the Hawk pads, heard good things about them. Probably going to try them, so the more pertinent question is: Ceramic or semi-metallic? Or should I starve the kids and get Steeda's 13" Cobra upgrade kit? (not expecting spousal approval on...

My front rotors have been turned for the last time and I'm thinking of upgrading to larger rotors so I am wondering if anyone has any recommendations. Some background info to keep in mind: '95 3.8L convertible, auto transmission, 118K miles, 17" American Eagle wheels. Except for the wheels, the...

I have a 65, 289 A code 4spd fastback that I restored into a correct 66 Shelby GT350. However when turning the car on all the gauges go to maximum! Ground issue? We have checked all the wiring and actually have replaced the underwire dash harness with a brand new one and still have the same...

I just bought a new Mustang with the interior upgrade package. The description of the package says it includes "satin aluminum scuff plates". When I open the driver's side door I see a satin aluminum plate in the jamb that says "Mustang". On the passenger side there is no plate, just the...

I recently purchased a flooded vehicle. Is the MFR warranty void? Also, if I buy a recovered stolen vehicle is the MFR warranty void. They are 2005 vehicles. Thanks

I have a 2001 GT Convt. automatic that has been given me the same problem for more than a year now that two Ford and a general car dealer could not diagnose or fix: If I drive in overdrive at anywhere between 35-50mph (i.e. slow highway speeds) and I take my foot of the gas, the car starts...

Would it be wiser for me to upgrade my fairly new basic crate 302 engine with a new cam, aluminum heads, rockers, or just buy a whole new one? (intake would be done either way and I allready have that in box waiting). I figure $200 for cam, $1400 for aluminum heads, $200 for rockers and...

I ordered new bushings for my clutch support bracket and they don't have a slotted straight edge like the originals. Can I just mig weld these in place? Otherwise every else fits nice....

Does anyone else have this problem with an 05 Mustang gas tank. Whenever I get gas, it takes forever as the pump keeps cutting off like the tank is full. Is it must me or does anyone else have this problem. Thanks for any light on this, Bill

I have had my 87 Mustang GT now for a few months, but for some reason, like most 'Stang owners do, I feel the need for more speed. I am not very knowledgeable about these things, as I have never tried to fix a car up before. I was just wondering if someone could give me some advice on what mods I...

I am having a lot of problems locating the "Turn Signal Flasher" for my 1993 Mustang. CHILTON Ford Mustang Repair Manual says it is mounted on the instrument panel reinforcement above the fuse panel. I've looked and can not locate it. Do you have to remove something to find it. If anyone knows...

ok this might be a stupid question . but im going to ask anyway.. i have a 2001 mustang , and i want to change the battery cable and upgrade the battery terminal..i see that on the positive side. there are 2 cable connected to the terminal.. 1 from the fuse block and one is from somewhere under the...

http://sn65.com/SN65%20chronological%20order%2005-12.htm quote: One of the things I noticed is that the fascination with huge diameter rims tucked up as far as possible under the fenders and quarters is still prevalent in the hobby. Fords, Chevys and Mopars alike are all getting the same...

Motorcycles emit 'disproportionately high' amounts of air pollutants Motorcycles collectively emit 16 times more hydrocarbons, three times more carbon monoxide and a "disproportionately high" amount of other air pollutants compared to passenger cars, according to a Swiss study to be published in...

Hi there, I have a 351C from a Fairlane 500 which I am tempted into slotting it into my 68 Coupe. My concerns are as follows: 1. I noticed that the small heater hose spout on the engine block is broken due to rust. (It seems like an integral part off the block). To explain, the hose that mounts...

Story that popped up in Google News caught my attention: Wheels bare? Hubcap Tony's got you covered "You name it, and chances are pretty good Hubcap Tony's got it. On a recent day, Tony, 80, scrambled around his Murray store to find hubcaps for a 1998 Plymouth Voyager, a 1963 Ford Mustang and a...