Be Safe in the Surf Australian beaches are magic - they're clean and big and free ... but they can also be very dangerous. Here are some basic precautions to help you enjoy your time at the beach: Do: · Swim on patrolled beaches, between the red and yellow flags · Comply with the directions of...

My 96 XJ has something like 330k on it and the ignition switch and lock has never given any trouble until today. Got in the Jeep, turned the key and it felt like something went "crunch", and when it got to the start position nothing happend. The dash lights come on, and with a push I got it...

Is the axle on a dana 30, on a wide track CJ, only longer on one side, or are both sides longer? Reason I'm asking is my frame broke on my 81 narrow track, I just bought a CJ with a with a good frame from the wrecker, it is probably wide track. I've replaced my dana 30 with hub upgrade and...

here's the full history. 5 years ago my dad and i rebuilt the sr-4 tranny (stuck in 3rd gear) in my 80, cj7. it crapped out within a couple months, (stuck in 3rd gear again) and it sat since then. so i dropped the sr-4 and picked up a t-4. rebuilt the t-4, new bearings and seals, etc.. stabbed the...

Having terrible trouble! After removing the old shock (Monroe Gas Magnum), it looks like the bushing sleeve is frozen on the threaded stud. However, after great effort and inability to remove what I think is the sleeve, I am starting to doubt whether or not there actually is a separate sleeve...

I am hoping someone out there could help me out. when i would be braking, just before stopping my brakes would grab and the abs would kick in. it was quite a hard stop. after a few days of this the abs light came on and is on steady. the problem went away but the abs light is still on. i...

I have been reading some of the specs on the JK Rubicon Unlimited.... front and rear lockers you can activate with the flick of a switch? dana 44s front and rear? 32" tires standard, no lift kit needed?? 4.10 gear ratio, 4:1 compression, and a six speed manual? And all with a factory...

I have been reading some of the specs on the JK Rubicon Unlimited.... front and rear lockers you can activate with the flick of a switch? dana 44s front and rear? 32" tires standard, no lift kit needed?? 4.10 gear ratio, 4:1 compression, and a six speed manual? And all with a factory...

My message filter (in Mozilla Thunderbird) has deleted 225 messages in this group since last night. I haven't been keeping exact counts, but I'm sure the previous "high" count was in the 80s. I sincerely hope all the good folks in this group have and are using message filters and/or kill files....

Sorry for the repeated tests. As a new user the site made it look like it was taking my postings but they wouldnt show up. come to find out the whole google group thing was frozen the whole time. They fixed it and all the old posting attempts came thru. Anyways my original posting was the one ...

able to post

test

===

able to post

My AC clutch is burned up. Can I replace it without losing freon? Thanks in advance. Barry

Will the tranny from an 86 XJ bolt up to a 93 yj, both 4 bangers from their respective years? AMC to Chrysler? Greg

Hi, I have the above mentioned vehicle It has no lifts or mods of any type and has the 15 inch stock rims on it.Will 30 X 9.50 X 15 tires fit on this jeep with no lift or mods?Thanks in advance

Have a 96 4.0 XJ Sport. I will be ordering a OME 2in suspension lift shortly, have done alot of research online and found a few questions i can't get a consistant answer on. 1. Do the heavy duty springs have the same comfortable spring rate as the standard ones? Have seen posting claiming they...

Installation and flex pics, for those who are interested. http://s33.photobucket.com/albums/d96/carlsaiyed/ Carl

I am reinstalling the receiver hitch on my YJ. I have lost the two bolts that go through the hitch assy and into the bottom of the frame on the Jeep. Would anyone know what size goes in there? Metric or english. I need to buy them and I don't know how to tell the size I need. Thanks, Greg