Cabin Air Filter for VW Golf III TDI 90HP GL 1995
 

I just bought a spare cabin air filter for my VW Golf III 90HP GL '95. The
old one was very dirty and clogged up so I need a new one. The previous
filter's brand was 'Valeo' but the new one is 'MECAFILTER'
(http://www.mecafilter.com/). This new filter comes with a set of
instructions that can be seen at this address:
http://www.mecafilter.com/notices/M022.pdf If you read that installation
literature, the first step for installing the new filter is attaching a
plastic frame to the new cabin air filter, but my previous filter is of
single construction; the plastic frame and the filter make a single
non-detachable unit.

My question is, is that plastic frame for the cabin filter an original VW
part? Any ideas on how to attach this new filter without the plastic frame
other than using some sort of adhesive tape?

Thank you in advance for your suggestions!

Cabin Air Filter for VW Golf III TDI 90HP GL 1995
 

> My question is, is that plastic frame for the cabin filter an original VW
> part? Any ideas on how to attach this new filter without the plastic frame
> other than using some sort of adhesive tape?

This new filter can be seen here>
http://www.mecafilter.com/mecafilter...er&ref=ELR7004

I cannot see any references to a plastic frame there. All I know is that my
previous 'Valeo' filter came with that plastic frame incorporated. This
plastic frame has a series of notches so the filter stays in place.

Cabin Air Filter for VW Golf III TDI 90HP GL 1995
 

Acc. to ETKA you should fit a plastic frame part # 1J0 819 648 when
replacing the filter. I think that the 'valeo' type is mounted by the
factory and that the replacement filter is just only the filter.
Trip to the dealer.....

SFC

"Wao" > schreef in bericht
...
>I just bought a spare cabin air filter for my VW Golf III 90HP GL '95. The
>old one was very dirty and clogged up so I need a new one. The previous
>filter's brand was 'Valeo' but the new one is 'MECAFILTER'
>(http://www.mecafilter.com/). This new filter comes with a set of
>instructions that can be seen at this address:
>http://www.mecafilter.com/notices/M022.pdf If you read that installation
>literature, the first step for installing the new filter is attaching a
>plastic frame to the new cabin air filter, but my previous filter is of
>single construction; the plastic frame and the filter make a single
>non-detachable unit.
>
> My question is, is that plastic frame for the cabin filter an original VW
> part? Any ideas on how to attach this new filter without the plastic frame
> other than using some sort of adhesive tape?
>
> Thank you in advance for your suggestions!

Cabin Air Filter for VW Golf III TDI 90HP GL 1995
 

"SFC" > ha escrit al
. ..
> Acc. to ETKA you should fit a plastic frame part # 1J0 819 648 when
> replacing the filter. I think that the 'valeo' type is mounted by the
> factory and that the replacement filter is just only the filter.
> Trip to the dealer.....
>
> SFC

Thank you very much!

Cabin Air Filter for VW Golf III TDI 90HP GL 1995
 

"SFC" > ha escrit al
. ..
> Acc. to ETKA you should fit a plastic frame part # 1J0 819 648 when
> replacing the filter. I think that the 'valeo' type is mounted by the
> factory and that the replacement filter is just only the filter.
> Trip to the dealer.....

I just bought that part at the nearest VW dealership for less than five
bucks, thank you!