94 Jetta III - Transmission Fluid/Oil Level
My suggestion is to get an Allen socket and a 1/2 " breaker bar to get it
off and put it on with a 3/8" ratchet . I,m pretty sure a piece of pipe or a
jack handle will remove it too if you hold it in with some pressure.
> wrote in message
ups.com...
>> If you can get a welder, an easy alternative maybe to
>> simply weld a nut onto a lug bolt.
>
> You don't even need a welder for that. Some flux, a brazing rod, and a
> propane torch is all you need to attach the nut to the bolt.
>
> And you don't even need that. Put two nuts on your lug bolt and tighten
> them to each other. Now stick your bolt in your trans plug and turn on
> the inner nut.
>
|