ouch by richard
On Wed, 01 Jun 2005 05:20:33 GMT, "Richard" > wrote:
>Remove the cap on the master cylinder and siphon off about 1/2 of brake
>fluid. Using a C clamp compress the pistons until they bottom out by putting
>one clamping pad on the caliper body and the other on the outer brake pad.
>With the piston(s) fully retracted the caliper and pads will easily slip
>over the rotor.
ouch!!!!!
you just focked his rear caliper
h
u
r
c
a
s
t
|