View Single Post
  #2  
Old May 24th 05, 02:38 AM
JG
external usenet poster
 
Posts: n/a
Default


"Bababooey" > wrote in message
. com...
> On the 2000 hardtop Corvette rear glass there are alot of these little
> black dots at the top of the window. The tinter said that the tint
> would not stick and it will look bad.
>
> Has anyone had this problem on their hardtop and any recommendations
> as to who and how it should and could be tinted?
>
> One person suggested getting some solid black tint from the area of
> the black dots and then regular tint below that.
>


Just had my 99 done. From the inside you can't tell a difference. From the
outside you can see the areas on top where the tint does not wrap around the
dots as tight as you'd want. My window was done 2 weeks ago and the area has
gotten smaller. My friend has his 03 done before mine at the same place with
the same type film and his area is real small. My Lexus has the dots on the
back and it too has a few areas that look like this. Before the company did
my car they went over this quite explicitly and even showed me two examples.
However since I live in Vegas it wasn't an option and I had it done. Let me
know if your interested in seeing some pics and I'll send them to you.


Ads