Warn bumper

Thanks to all for your ideas. I think I'm gonna try the maglight clip or
pvc idea since I have the roller fairlead.

"jbjeep" > wrote in message
...
> If you want to cheat, maglight clips are the exact size to fit roller
> fairleads.
> Just attach them to your license plate and snap it on. If you really want
> to cheat,
> get the license plate bracket from Kilby.
>
>
>
> On Mon, 29 Nov 2004 16:33:45 -0500, Mike Romain >
> wrote:
>
>>>Do you have a roller fairlead? If so I have seen folks use a chunk of
>>>PCV pipe with 1/4 of it cut out lengthwise along the back. This clips
>>>on the roller when on the road and can be removed for winch use.
>>>
>>>Only downside I see is air flow restriction to the rad.
>>>
>>>Mike
>>>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>88 Cherokee 235 BFG AT's
>>>
>>>Dennis Cox wrote:
>>>>
>>>> 97 Wrangler
>>>> Has anyone mounted a license plate to a front Warn rock crawler bumper?
>>>> I
>>>> just put the warn on and I'm without my license plate right now. I
>>>> don't
>>>> want johnny law pulling me over for it. Yes it is required in TX.
>>>>
>>>> What ideas do y'all have for the exposed frame on the front of the Jeep
>>>> after installing Warn bumper and winch? It used to be hidden by the
>>>> plastic
>>>> Jeep cover, but now, there is some dirty steel showing around the sides
>>>> of
>>>> the winch.
>>>>
>>>> Also, anyone around Dallas in need of a factory aluminum bumper and
>>>> aforementioned plastic cover? How about a not so hot black soft top?
>>>> It
>>>> has 1 unrepaired tear in it, but it works if you needed something for a
>>>> beater TJ. Are TJ's old enough for there to be beaters lying around?
>>>> All
>>>> items real cheap.
>>>>
>>>> Thanks,
>

Thanks to all for your ideas. I think I'm gonna try the maglight clip or
pvc idea since I have the roller fairlead.

"jbjeep" > wrote in message
...
> If you want to cheat, maglight clips are the exact size to fit roller
> fairleads.
> Just attach them to your license plate and snap it on. If you really want
> to cheat,
> get the license plate bracket from Kilby.
>
>
>
> On Mon, 29 Nov 2004 16:33:45 -0500, Mike Romain >
> wrote:
>
>>>Do you have a roller fairlead? If so I have seen folks use a chunk of
>>>PCV pipe with 1/4 of it cut out lengthwise along the back. This clips
>>>on the roller when on the road and can be removed for winch use.
>>>
>>>Only downside I see is air flow restriction to the rad.
>>>
>>>Mike
>>>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>88 Cherokee 235 BFG AT's
>>>
>>>Dennis Cox wrote:
>>>>
>>>> 97 Wrangler
>>>> Has anyone mounted a license plate to a front Warn rock crawler bumper?
>>>> I
>>>> just put the warn on and I'm without my license plate right now. I
>>>> don't
>>>> want johnny law pulling me over for it. Yes it is required in TX.
>>>>
>>>> What ideas do y'all have for the exposed frame on the front of the Jeep
>>>> after installing Warn bumper and winch? It used to be hidden by the
>>>> plastic
>>>> Jeep cover, but now, there is some dirty steel showing around the sides
>>>> of
>>>> the winch.
>>>>
>>>> Also, anyone around Dallas in need of a factory aluminum bumper and
>>>> aforementioned plastic cover? How about a not so hot black soft top?
>>>> It
>>>> has 1 unrepaired tear in it, but it works if you needed something for a
>>>> beater TJ. Are TJ's old enough for there to be beaters lying around?
>>>> All
>>>> items real cheap.
>>>>
>>>> Thanks,
>