|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
November 4th 04, 10:57 PM
|
|||
|
|||
Rim specs for '84
Can someone help me figure out what the specs on rims for an '84 mean and
what other rims are interchanagable. The specs that I have a 17X9.5 (+38mm, 6.7" backspace) 17X11 (+36.5mm, 7.397 backspace) 5 lug (5X120.64mm) Thanks for any help, Art '84 red/red 
|
| Ads |
|
#2
November 5th 04, 01:09 AM
|
|||
|
|||
|
the rims are the same specs for '84-'87. the backspace changes in '88
"Art" > wrote in message om... > Can someone help me figure out what the specs on rims for an '84 mean and > what other rims are interchanagable. The specs that I have a > > 17X9.5 (+38mm, 6.7" backspace) > 17X11 (+36.5mm, 7.397 backspace) > 5 lug (5X120.64mm) > > Thanks for any help, > > > Art > '84 red/red > >
|
|
#3
November 5th 04, 01:09 AM
|
|||
|
|||
|
the rims are the same specs for '84-'87. the backspace changes in '88
"Art" > wrote in message om... > Can someone help me figure out what the specs on rims for an '84 mean and > what other rims are interchanagable. The specs that I have a > > 17X9.5 (+38mm, 6.7" backspace) > 17X11 (+36.5mm, 7.397 backspace) > 5 lug (5X120.64mm) > > Thanks for any help, > > > Art > '84 red/red > >
|
|
#4
November 6th 04, 03:26 PM
|
|||
|
|||
|
First off, you do not have '84 rims from these sizes.
The 17 inch rim was introduced in '89 as a 9.5 inch width. The 11 inch I believe is the rear ZR-1 rim, which while it came out in Dec. '89, was not available to the public until the '90 model. The standard size for '84 to '88 was 16x8.5 and the 16x9.5 was from the Z51 option. The '84 to '87 are the same wheels with paint changes and the '88 is a different design. "JOEVET" > wrote in message et... > the rims are the same specs for '84-'87. the backspace changes in '88 > "Art" > wrote in message > om... > > Can someone help me figure out what the specs on rims for an '84 mean and > > what other rims are interchanagable. The specs that I have a > > > > 17X9.5 (+38mm, 6.7" backspace) > > 17X11 (+36.5mm, 7.397 backspace) > > 5 lug (5X120.64mm) > > > > Thanks for any help, > > > > > > Art > > '84 red/red > > > > > >
|
|
#5
November 6th 04, 03:26 PM
|
|||
|
|||
|
First off, you do not have '84 rims from these sizes.
The 17 inch rim was introduced in '89 as a 9.5 inch width. The 11 inch I believe is the rear ZR-1 rim, which while it came out in Dec. '89, was not available to the public until the '90 model. The standard size for '84 to '88 was 16x8.5 and the 16x9.5 was from the Z51 option. The '84 to '87 are the same wheels with paint changes and the '88 is a different design. "JOEVET" > wrote in message et... > the rims are the same specs for '84-'87. the backspace changes in '88 > "Art" > wrote in message > om... > > Can someone help me figure out what the specs on rims for an '84 mean and > > what other rims are interchanagable. The specs that I have a > > > > 17X9.5 (+38mm, 6.7" backspace) > > 17X11 (+36.5mm, 7.397 backspace) > > 5 lug (5X120.64mm) > > > > Thanks for any help, > > > > > > Art > > '84 red/red > > > > > >
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Alignment specs for E46 ZHP | Jason G | BMW | 0 | January 11th 05 09:23 PM |
| 1997 318ti: what is the stock tape head receiver specs? | coontrax | BMW | 1 | January 2nd 05 01:33 PM |
| Audi A6, 4.2 -- Alignment Specs? | Anit Patel | Audi | 2 | December 5th 04 06:05 PM |
| To Register European Specs BMW in the U.S. | Dissenter | BMW | 4 | November 1st 04 05:29 AM |
Linear Mode
