If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#131
|
|||
|
|||
Can you teach me more about lug bolts & related tire tools?
rbowman > wrote:
> I use the HF sockets and wrenches in my bike toolkits. If the kit gets > ripped off I can replace it for about $50 and they get the job done. > Other HF purchases haven't worked as well. When it comes to HF, the > fewer moving parts the better. I agree with you that the HF quality isn't always the best, but, it's "good enough" for some jobs, where, I can tell you that the tire-changing tools are OK for the number of tires we will be doing in our lifetimes. I would gladly buy a wrench set for the emergency kit of my car from HF, but I wouldn't use it as my primary set of wrenches (almost all of which are Craftsman, which is middle-of-the-line stuff, IMHO). The thing I have to stress about the HF tire mounter is that you can only use the bead breaker attachment on easy tires such as a Japanese import economy car, where it works ok on my European sport sedan, but it fails miserably (it literally bends) on the SUV tires. The other thing I stress about the HF mounter is that you must bolt it down. You can get away with not bolting it down, but it's just not worth the trouble that causes, compared to the slight issue of drilling four bolt holes and popping in the inserts. I just leave mine in but you can unbolt it in a couple of minutes if you want to store it collapsed. As for the bed breaking tool, it too has a slight problem with SUV tires, but all tires smaller are no contest. The SUV tires are too big for the base, so they flip up, which in one of the videos you see a guy not realizing that. The solution is simple, which is to put a board on the base, which prevents the wheel from popping up on the side opposite where you're trying to break the bead. With that simple addition, it works fine for SUV tires. I have no complaints with the static balance tool. I think it's a bit pricey for what it is (it's just a cone-shaped bubble balance) but it's all aluminum and it stores easily and certainly is easy to use so it does the job. |
Ads |
#132
|
|||
|
|||
Can you teach me more about lug bolts & related tire tools?
On Tue, 20 Feb 2018 17:05:28 +0000 (GMT), "Dave Plowman (News)"
> wrote: >In article >, > alan_m > wrote: >> I predict that staying in the EU or leaving will have exactly the same >> result with regards car assembly - it will migrate towards the poorer >> Eastern European countries in much the same way as many other industries >> have disappeared from the UK during the 40 years of EEC/EU membership. > >> Ask French and German car workers why their jobs are at risk, and both >> these countries are not leaving the EU. > >There is more to making cars - especially above budget level - than just >finding the cheapest place to do it. But apparently nothing the UK has to offer - - - |
#133
|
|||
|
|||
Can you teach me more about lug bolts & related tire tools?
On 2/20/2018 12:05 PM, Dave Plowman (News) wrote:
> In article >, > alan_m > wrote: >> I predict that staying in the EU or leaving will have exactly the same >> result with regards car assembly - it will migrate towards the poorer >> Eastern European countries in much the same way as many other industries >> have disappeared from the UK during the 40 years of EEC/EU membership. > >> Ask French and German car workers why their jobs are at risk, and both >> these countries are not leaving the EU. > > There is more to making cars - especially above budget level - than just > finding the cheapest place to do it. > The robots don't care where they are. OTOH, look where the car makers have put up plants. No new ones in Detroit, New York, or California. Mexico has some. How about a Hungary Mercedes http://www.autoguide.com/auto-news/2...t-germany.html |
#134
|
|||
|
|||
Can you teach me more about lug bolts & related tire tools?
On 20/02/2018 20:01, rbowman wrote:
> On 02/20/2018 05:21 AM, alan_m wrote: >> On 20/02/2018 04:58, ultred ragnusen wrote: >>> Â* wrote: >>> >>>>> Take a look at that biker's concept of a "pocket knife" at 53 seconds! >>>>> https://youtu.be/M5_nK8V-nU0?t=53 >>>> >>>> Compared to what's in my pocket at the moment... >>>> http://www.coldsteel.com/recon-1-tan...0-50-edge.html >>>> >>>> After using it for a few years, I'm not that crazy about the tanto >>>> style, but it is good for prying out nails. >>> >>> Jesus. That's battle gear for heaven's sake! >>> >>> This is what I consider to be a typical pocket knife. >>> https://media.midwayusa.com/producti...365/365933.jpg >>> >> >> Carry the former in the UK and you would probably be arrested if stopped >> or if you used it in public. >> >> > > Thanks the Gods I don't live in the UK. I have many knives and I'm sure > they are all illegal in the UK. Thank god we don't have the killings other countries seem to suffer. |
#135
|
|||
|
|||
Can you teach me more about lug bolts & related tire tools?
On 02/20/2018 06:53 PM, Fredxx wrote:
> On 20/02/2018 20:01, rbowman wrote: >> On 02/20/2018 05:21 AM, alan_m wrote: >>> On 20/02/2018 04:58, ultred ragnusen wrote: >>>> wrote: >>>> >>>>>> Take a look at that biker's concept of a "pocket knife" at 53 >>>>>> seconds! >>>>>> https://youtu.be/M5_nK8V-nU0?t=53 >>>>> >>>>> Compared to what's in my pocket at the moment... >>>>> http://www.coldsteel.com/recon-1-tan...0-50-edge.html >>>>> >>>>> After using it for a few years, I'm not that crazy about the tanto >>>>> style, but it is good for prying out nails. >>>> >>>> Jesus. That's battle gear for heaven's sake! >>>> >>>> This is what I consider to be a typical pocket knife. >>>> https://media.midwayusa.com/producti...365/365933.jpg >>>> >>>> >>> >>> Carry the former in the UK and you would probably be arrested if stopped >>> or if you used it in public. >>> >>> >> >> Thanks the Gods I don't live in the UK. I have many knives and I'm >> sure they are all illegal in the UK. > > Thank god we don't have the killings other countries seem to suffer. > > You are working on it. http://www.bbc.co.uk/news/uk-39729601 Try a little more diversity and you'll make the grade. |
#136
|
|||
|
|||
Can you teach me more about lug bolts & related tire tools?
On 20/02/2018 10:45 PM, alan_m wrote:
> On 20/02/2018 08:33, ultred ragnusen wrote: > >> Luckily it's easy to dismount, remount, and statically balance (and >> dynamically test) a tire yourself, > > You are joking! I've seen on many occasions how much effort goes into > removing/replacing a tyre from/on the rim using the specialised tyre > fitting equipment. There is also the 15/30 minutes for blowing up a > completely flat tyre with one of those little 12V compressors that fit > into the cigarette lighter socket. > > I can just see all those inexperienced people breaking/chipping their > alloy rims using breaker bars. > > For the money I pay to get a puncture repaired (and dynamically > balanced) by a tyre shop it's not worth the effort to even consider > Do-it-Yourself.Â* Without researching prices, I'll bet here in the UK the > cost of obtaining one or two proper tyre repair patches would actually > be close to the cost of using someone who does it for a living. > I'm with you. Repairing punctures was something I had to do as part of my trade. Even with the gear, it was a pain to do, especially truck and tractor tyres. At 65, I'm quite happy to pay someone much younger to do the job for me. -- Xeno |
#137
|
|||
|
|||
Can you teach me more about lug bolts & related tire tools?
On 21/02/2018 01:45, Ed Pawlowski wrote:
> > The robots don't care where they are.Â* OTOH, look where the car makers > have put up plants.Â* No new ones in Detroit, New York, or California. > Mexico has some. The robots may not care where they live but it still needs a large, mainly unskilled or semi-skilled workforce to feed them and to perform all the other tasks that currently cannot be assigned to robots. The location of new assembly plants probably has more to do with who can give the biggest grant or subsidy in the guise of regional aid for deprived areas or just a government willing to forego taxes in order to create jobs in n area. I doubt if there are many car factories these days where a whole car is manufactured on the premises. Often engines and gearboxes are manufactured in a single plant and then shipped worldwide and the same item ends up in many competing brands. In the past I have seen user reviews where they claim that the power-train in brand X is a lot better than that in brand Y whereas they are exactly the same. It's much the same in other industries. How many companies actually make the LCD screens for large screen TVs? How many consumer items are just badged? Here in the UK well known brand names have been purchased to allow the brand badge to be used on no-name electronics or other goods. I'm aware of at least one item of electronics where the identical item was sold under 4 different brand names, all at different prices, to cater for those with brand loyalty and to fleece those who believe that band A is better quality than brand B, even though brand B as an independent company went bust a decade before. -- mailto : news {at} admac {dot} myzen {dot} co {dot} uk |
#138
|
|||
|
|||
Can you teach me more about lug bolts & related tire tools?
On 21/02/2018 04:07, rbowman wrote:
> Try a little more diversity and you'll make the grade. We are getting there. The new weapon of choice seems to be throwing acid. https://www.thesun.co.uk/news/401685...rns-sufferers/ Those carrying out attacks can be charged with Grievous Bodily Harm (GBH) with intent which carries a maximum life sentence. The best way to avoid these attacks in the UK is don't get involved with domestic violence and don't attend any nightclub where there only claim to fame is that they are frequented by Z list celebrities. -- mailto : news {at} admac {dot} myzen {dot} co {dot} uk |
#139
|
|||
|
|||
Can you teach me more about lug bolts & related tire tools?
rbowman > wrote:
> Can you say 'lawyer'? I've spent some time in southern AZ close to the > border. It's refreshing to deal with Mexican mechanics. They still use a > bit of ingenuity. Speaking of ingenuity, check out this redneck rear rotor surfacing technique at home, with a grinder and while the rotors are spinning. https://youtu.be/q5p-KHkx1YA?t=123 I guess it works for driven wheels only though. https://youtu.be/SUIJySdkCZk?t=370 https://youtu.be/xokh96wRxb4?t=236 https://youtu.be/YsfadqO9V2A?t=55 https://youtu.be/rum-Wlok7n4?t=2 I guess this is how rednecks do the non-driven wheels. https://youtu.be/R9qCFfDiw5A?t=350 https://youtu.be/Qgz3BnWpeUg?t=22 https://youtu.be/NxLeKG-oRmc?t=67 https://youtu.be/7dFBaLCjYck?t=71 |
#140
|
|||
|
|||
Can you teach me more about lug bolts & related tire tools?
On 21/02/2018 10:50, ultred ragnusen wrote:
> Speaking of ingenuity, check out this redneck rear rotor surfacing > technique at home, with a grinder and while the rotors are spinning. Judging by those videos you don't need to ban guns in the USA - just ban power tools! -- mailto : news {at} admac {dot} myzen {dot} co {dot} uk |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Thumping noise related to flat tire fix? | Yong Huang | Technology | 4 | May 17th 09 03:31 PM |
More Dangerous Chinese Tire-related Crap | * | Technology | 18 | July 16th 08 12:49 AM |
That will teach him | SVTKate | Ford Mustang | 17 | June 26th 05 07:09 PM |
What tools are needed to change a tire? | Doc | General | 7 | May 29th 04 06:46 PM |