If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Command trac to Selec trac
I have a 98 Cherokee sport purchased new with command trac.
Many years ago I swapped out the command trac transfer case for a select trac. I had a jeep dealer do the work. After the swap everything worked fine including the indicator light on the dash for the transfer case. Recently I had a leak in the transfer case repaired at a shop. After the repair they told me the indicator light on the dash would not work because the wiring that connects the indicator light on the dash to the transfer case did not have an adapter. Does anyone in this group know what kind of adapter (part number?) I might need? Thanks in advance. Larry |
Ads |
#2
|
|||
|
|||
Command trac to Selec trac
Larry wrote:
> I have a 98 Cherokee sport purchased new with command trac. > > Many years ago I swapped out the command trac transfer case for a > select trac. I had a jeep dealer do the work. > > After the swap everything worked fine including the indicator light > on the dash for the transfer case. > > Recently I had a leak in the transfer case repaired at a shop. After > the repair they told me the indicator light on the dash would not > work because the wiring that connects the indicator light on the dash > to the transfer case did not have an adapter. > > Does anyone in this group know what kind of adapter (part number?) I > might need? > > Thanks in advance. > > Larry Should be just basic wiring, basically a couple of wires. My guess is they disconnected or cut something and didn't know how to put it back so they fed you a shovel of bull****. Grab the schematics here. http://www.revbeergoggles.com/temp/ezg_8w.pdf Have a happy -- DougW |
#3
|
|||
|
|||
Command trac to Selec trac
On Friday, August 23, 2013 3:51:10 PM UTC-6, DougW wrote:
> Larry wrote: > > > I have a 98 Cherokee sport purchased new with command trac. > > > > > > Many years ago I swapped out the command trac transfer case for a > > > select trac. I had a jeep dealer do the work. > > > > > > After the swap everything worked fine including the indicator light > > > on the dash for the transfer case. > > > > > > Recently I had a leak in the transfer case repaired at a shop. After > > > the repair they told me the indicator light on the dash would not > > > work because the wiring that connects the indicator light on the dash > > > to the transfer case did not have an adapter. > > > > > > Does anyone in this group know what kind of adapter (part number?) I > > > might need? > > > > > > Thanks in advance. > > > > > > Larry > > > > Should be just basic wiring, basically a couple of wires. > > My guess is they disconnected or cut something and didn't > > know how to put it back so they fed you a shovel of > > bull****. > > > > Grab the schematics here. > > http://www.revbeergoggles.com/temp/ezg_8w.pdf > > > > Have a happy > > > > -- > > DougW Thanks for that info... Larry |
#4
|
|||
|
|||
Command trac to Selec trac
Larry wrote:
> > Thanks for that info... > > Larry No problem -- DougW |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Trac-Loc clunking? | Clay B Carley | 4x4 | 9 | January 12th 07 06:00 PM |
trac-loc | DeerSkull | Jeep | 3 | September 17th 06 03:41 AM |
detroit tru trac | Glenn | Jeep | 4 | March 29th 06 10:27 PM |
Trac - Loc | Carl | Jeep | 21 | October 10th 05 05:38 PM |
Command-trac 4Hi usage questions | Sandstone | Jeep | 23 | September 7th 05 11:31 AM |