If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
How do I properly install timing belt, balancer belt on H22A Engine? Please Help
Does anyone know where i can find more information on changing the
timing belt(possibly with pictures) on an h22 properly. There are two main things i am concerned about: What is the best way to remove the crankshaft pulley bolt? Once i remove the timing belt, what happens if the crankshaft or one of the pulleys is rotated a full revolution without me noticing even if there is a mark, do i just realign the pulley with the mark or how do i make sure the it is aligned? to my understanding the below procedures are the correct procedures to align the first piston to TDC and install timing and balancer belt. 1. align the cams with the word top at top, tdc marks aligned with cylinder head upper surface 2. align the groove on front balancer pulley with oil pump housing 3. align the rear balancer pulley using the maintence hole with a bolt to 74mm scribed line 4. turn crankshaft pulley one turn counter clockwise. If anyone has anything else i should know that would be greatly appreciated. thanks Matt |
Ads |
#2
|
|||
|
|||
How do I properly install timing belt, balancer belt on H22A Engine? Please Help
" > wrote in
ups.com: > Does anyone know where i can find more information on changing the > timing belt(possibly with pictures) on an h22 properly. There are two > main things i am concerned about: > > What is the best way to remove the crankshaft pulley bolt? Have a read through he http://www.tegger.com/hondafaq/faq.html#engines Then save yourself a ton of grief and potential damage by buying a factory shop manual he www.helminc.com You can find used factory manuals on eBay. Forget Chilton/Haynes, etc. They are useless for this sort of thing. -- TeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
#3
|
|||
|
|||
How do I properly install timing belt, balancer belt on H22A Engine?Please Help
" wrote:
> > Does anyone know where i can find more information on changing the > timing belt(possibly with pictures) on an h22 properly. There are two > main things i am concerned about: > > What is the best way to remove the crankshaft pulley bolt? > > Once i remove the timing belt, what happens if the crankshaft or one of > the pulleys is rotated a full revolution without me noticing even if > there is a mark, do i just realign the pulley with the mark or how do i > make sure the it is aligned? > > to my understanding the below procedures are the correct procedures to > align the first piston to TDC and install timing and balancer belt. > > 1. align the cams with the word top at top, tdc marks aligned with > cylinder head upper surface > 2. align the groove on front balancer pulley with oil pump housing > 3. align the rear balancer pulley using the maintence hole with a bolt > to 74mm scribed line > 4. turn crankshaft pulley one turn counter clockwise. > > If anyone has anything else i should know that would be greatly > appreciated. > > thanks > Matt --------------------------------------- In addition to the tegger site, use only the proper 50 mm tool to hold the pulley, and have a 17 mm deep socket on hand for the motor mount. 'Curly' |
#4
|
|||
|
|||
How do I properly install timing belt, balancer belt on H22A Engine? Please Help
i already have the engine out, that was the easy part, now i have the
jdm h22 on my engine hoist and have heard of the autotensioner failing. how do i remove the crankshaft bolt when it is out of the car? should i set the engine on the ground? haven't tryed yet, just want to be prepared. obviously the special honda removal tool in the previous links is the best way to go other then air, but the engine on a hoist may present a problem when trying to break the bolt loose. i have both the service manual, swap guide and the chilton manual, but am sure there are others things i should be aware of when working with the timing belt. i work with networks and computers so the wiring and electrical is second nature to me, but the machanical i want make sure i do correct. matt 'Curly Q. Links' wrote: > " wrote: > > > > Does anyone know where i can find more information on changing the > > timing belt(possibly with pictures) on an h22 properly. There are two > > main things i am concerned about: > > > > What is the best way to remove the crankshaft pulley bolt? > > > > Once i remove the timing belt, what happens if the crankshaft or one of > > the pulleys is rotated a full revolution without me noticing even if > > there is a mark, do i just realign the pulley with the mark or how do i > > make sure the it is aligned? > > > > to my understanding the below procedures are the correct procedures to > > align the first piston to TDC and install timing and balancer belt. > > > > 1. align the cams with the word top at top, tdc marks aligned with > > cylinder head upper surface > > 2. align the groove on front balancer pulley with oil pump housing > > 3. align the rear balancer pulley using the maintence hole with a bolt > > to 74mm scribed line > > 4. turn crankshaft pulley one turn counter clockwise. > > > > If anyone has anything else i should know that would be greatly > > appreciated. > > > > thanks > > Matt > > --------------------------------------- > > In addition to the tegger site, use only the proper 50 mm tool to hold > the pulley, and have a 17 mm deep socket on hand for the motor mount. > > 'Curly' |
#5
|
|||
|
|||
How do I properly install timing belt, balancer belt on H22A Engine?Please Help
" wrote:
> > i already have the engine out, that was the easy part, now i have the > jdm h22 on my engine hoist and have heard of the autotensioner failing. -------------------------- Is there an AUTO-tensioner on that puppy? Please tell us what year / models of CAR we're talking about, so everybody can _picture_ this operation . . . 'Curly' |
#6
|
|||
|
|||
How do I properly install timing belt, balancer belt on H22A Engine? Please Help
yes it has an auto tensioner, i should replace it with the manual
tensioner, correct? 'Curly Q. Links' wrote: > " wrote: > > > > i already have the engine out, that was the easy part, now i have the > > jdm h22 on my engine hoist and have heard of the autotensioner failing. > > -------------------------- > > Is there an AUTO-tensioner on that puppy? > > Please tell us what year / models of CAR we're talking about, so > everybody can _picture_ this operation . . . > > 'Curly' |
#7
|
|||
|
|||
How do I properly install timing belt, balancer belt on H22A Engine? Please Help
1995 jdm h22a1
'Curly Q. Links' wrote: > " wrote: > > > > i already have the engine out, that was the easy part, now i have the > > jdm h22 on my engine hoist and have heard of the autotensioner failing. > > -------------------------- > > Is there an AUTO-tensioner on that puppy? > > Please tell us what year / models of CAR we're talking about, so > everybody can _picture_ this operation . . . > > 'Curly' |
#8
|
|||
|
|||
How do I properly install timing belt, balancer belt on H22A Engine? Please Help
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
rec.autos.makers.chrysler FAQ, Part 1/6 | Dr. David Zatz | Chrysler | 6 | December 7th 06 04:55 PM |
How do I properly install timing belt, balancer belt on H22A Engine? Please Help | [email protected] | Technology | 2 | August 5th 06 05:10 AM |
Recommendations for Jeep Mechanic near Edison, NJ | [email protected] | Jeep | 1 | July 30th 06 07:10 PM |
Timing belt noise....ticking 93 Accord | honda man | Honda | 12 | March 13th 06 04:10 AM |
rec.autos.makers.chrysler FAQ, Part 1/6 | Dr. David Zatz | Chrysler | 5 | March 21st 05 05:33 AM |