If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#21
|
|||
|
|||
"Mike Romain" > wrote in message ... > Bud, you played 'Chicken Little' and lied off the bat on this thread. < No, Mike, I did not, I asked an honest question. For my trouble, Bill imediately called me a troll for no reason, then you went to attack mode in due fashion. > That is why Bill called you a Troll, he was right and spotted it.> He was wrong and at least has had the good sense to shut up about it. You apprently are very immature and can't stop until you get the last word. > I was really patient and tried to walk you threw it slowly figuring you > were some 16 year old with his first Jeep or something, only to have you > come back and call me 'condescending.'> You weren't patient, you insisted what I had was "not RTV", despite my twice telling you that it was. I knew it was RTV because the installer at Avalance told me what he used. What was I supposed to do, mail you a friggin' sample? > Here is your lie quoted:> > Thanks everyone for your feedback. So far I've got "nothing", fingers, > erasers, old credit cards, alcohol and gasoline. Something has to work! > > End quote. > > This means to me anyway, you have tried all the above and nothing.....> No, Mike, once again you shot from the hip. You have attempted to twist everything around I wrote, you've called me a liar an and I really resent it. What I clearly meant was 1) thank you to everyone who responded, 2) I now had a list of suggestions I could try, including doing "nothing". "Something has to work!" meant that with all those kindly offered suggestions I was certain to have an answer to my problem. Indeed, one respondent said nothing would work without damaging the paint. No one but you, not even Bill, misinterpreted what I meant. Over the next few days I tried all of the suggestions, which meant I ran out and bought 3M Adhesive Remover, a 3M Stripe Remover wheel, etc. In the end your suggestion to use gasoline worked and I thanked you, along with everyone else for their suggestions. > This is in response to me saying: 'Maybe an eraser? If it 'is' RTV, it > will rub off with your finger. An old credit card works. You can also get > a liquid gasket remover stuff that is supposed to dissolve it. Gasoline > will dissolve it, but it takes a little while.'> > End quote. > > Then I came back and said: 'Then you don't have RTV there'.. > > Bill said the same, Roy figured the same, Snow figured the same, Paul > figured the same. > > If you had of just told the truth that you never tried squat, instead you > just were too busy complaining, we wouldn't be having this exchange right > now.> You misunderstood my response & then have the audacity to call me a liar, that's pretty low, Mike! > Then when I insist on still politely calling your bull ****, by saying > once again: 'I will say again. You 'cannot' have RTV there!' < And, Mr. Shoot-From-The-Lip, you were wrong. I was not "bull****ting", at that point I was at a stage where nothing that I'd tried so far that had been suggested worked. As I explained, for safety reasons I hadn't yet tried your suggestion to use gasoline, for obvious safety concerns. >Then 'you' call 'me' condescending and a know it all.< Because you were. > All this BS because you told us a lie.< You have a lot of nerve, Mike, to call me a liar for absolutely no reason other than to justify your own inappropriate behavior. I really resent it. > I will leave this alone now, hopefully you get the point.< I sure do, you've behaved inappropriately, you can't admit you're wrong, you've insulted me repeatedly and I now have a totally different opinion of you than I've had for some time. That probably won't change. You can start with an apology. |
Ads |
#22
|
|||
|
|||
"Mike Romain" > wrote in message ... > Bud, you played 'Chicken Little' and lied off the bat on this thread. < No, Mike, I did not, I asked an honest question. For my trouble, Bill imediately called me a troll for no reason, then you went to attack mode in due fashion. > That is why Bill called you a Troll, he was right and spotted it.> He was wrong and at least has had the good sense to shut up about it. You apprently are very immature and can't stop until you get the last word. > I was really patient and tried to walk you threw it slowly figuring you > were some 16 year old with his first Jeep or something, only to have you > come back and call me 'condescending.'> You weren't patient, you insisted what I had was "not RTV", despite my twice telling you that it was. I knew it was RTV because the installer at Avalance told me what he used. What was I supposed to do, mail you a friggin' sample? > Here is your lie quoted:> > Thanks everyone for your feedback. So far I've got "nothing", fingers, > erasers, old credit cards, alcohol and gasoline. Something has to work! > > End quote. > > This means to me anyway, you have tried all the above and nothing.....> No, Mike, once again you shot from the hip. You have attempted to twist everything around I wrote, you've called me a liar an and I really resent it. What I clearly meant was 1) thank you to everyone who responded, 2) I now had a list of suggestions I could try, including doing "nothing". "Something has to work!" meant that with all those kindly offered suggestions I was certain to have an answer to my problem. Indeed, one respondent said nothing would work without damaging the paint. No one but you, not even Bill, misinterpreted what I meant. Over the next few days I tried all of the suggestions, which meant I ran out and bought 3M Adhesive Remover, a 3M Stripe Remover wheel, etc. In the end your suggestion to use gasoline worked and I thanked you, along with everyone else for their suggestions. > This is in response to me saying: 'Maybe an eraser? If it 'is' RTV, it > will rub off with your finger. An old credit card works. You can also get > a liquid gasket remover stuff that is supposed to dissolve it. Gasoline > will dissolve it, but it takes a little while.'> > End quote. > > Then I came back and said: 'Then you don't have RTV there'.. > > Bill said the same, Roy figured the same, Snow figured the same, Paul > figured the same. > > If you had of just told the truth that you never tried squat, instead you > just were too busy complaining, we wouldn't be having this exchange right > now.> You misunderstood my response & then have the audacity to call me a liar, that's pretty low, Mike! > Then when I insist on still politely calling your bull ****, by saying > once again: 'I will say again. You 'cannot' have RTV there!' < And, Mr. Shoot-From-The-Lip, you were wrong. I was not "bull****ting", at that point I was at a stage where nothing that I'd tried so far that had been suggested worked. As I explained, for safety reasons I hadn't yet tried your suggestion to use gasoline, for obvious safety concerns. >Then 'you' call 'me' condescending and a know it all.< Because you were. > All this BS because you told us a lie.< You have a lot of nerve, Mike, to call me a liar for absolutely no reason other than to justify your own inappropriate behavior. I really resent it. > I will leave this alone now, hopefully you get the point.< I sure do, you've behaved inappropriately, you can't admit you're wrong, you've insulted me repeatedly and I now have a totally different opinion of you than I've had for some time. That probably won't change. You can start with an apology. |
#23
|
|||
|
|||
"L.W. ("ßill") Hughes III" > wrote in message ... > More F**Kin' BULL SH*T! Anyone with that amount of modifications on > a YJ knows what "Room-Temperature Vulcanizing" is, and how to work with > it! Like all trolls, you haven't the balls to sign your posts, nor use a > real address, and further spoof your address with "newsdawg", therefo > you are a TROLL and LIAR! And frankly, insulting to our intelligence. > God Bless America, ßill O|||||||O Ok, Bill, I've had enough, here goes: I've posted on this forum for years as Jerry McG. Not that it's any of your friggin' business, but I changed my screen name to SoK66 a few weeks ago and altered the e-mail to stop all the God damn usenet-scanned porno and other bull**** from filling up my in box, viruses and all. I know fully well what "Room Tempreature Vulvanizing" is and I've worked with it for as many or more years as you. HOWEVER, BILL, I've never had to get a stripe of it approx. 4' long and 1/2" wide off of a visible painted surface. Nor has anyone else I know locally, including my body man. I thought before I had him strip it to the metal and reshoot it, as some suggested, it would be a simple GOD DAMN question to ask on this PUBLIC FRIGGIN' JEEP FORUM! I didn't expect to be insulted by you or anyone else simply for asking this simple question! If you don't believe I have two the Jeeps, then here's an old link to Webshots with some shots of them that I set up last spring for an online article. http://community.webshots.com/photo/...37932612OWzeZc There you go, wise ass. As for my qualifications, I'm a retired Ford / Jaguar Service executive, I'm a former ASE and VW Master Tech, and I'm now President of the Creeper Jeepers Gang of Durango Colorado. I don't have to tell you all this, but I've been insulted enough to stuff it right in your arrogant face. Match me, Mr. "Real Jeep" know-it-all with your qualifications if you dare. I may accept your apology, once it's given. Until then, Bill, understand that I think you're a friggin' idiot. |
#24
|
|||
|
|||
"L.W. ("ßill") Hughes III" > wrote in message ... > More F**Kin' BULL SH*T! Anyone with that amount of modifications on > a YJ knows what "Room-Temperature Vulcanizing" is, and how to work with > it! Like all trolls, you haven't the balls to sign your posts, nor use a > real address, and further spoof your address with "newsdawg", therefo > you are a TROLL and LIAR! And frankly, insulting to our intelligence. > God Bless America, ßill O|||||||O Ok, Bill, I've had enough, here goes: I've posted on this forum for years as Jerry McG. Not that it's any of your friggin' business, but I changed my screen name to SoK66 a few weeks ago and altered the e-mail to stop all the God damn usenet-scanned porno and other bull**** from filling up my in box, viruses and all. I know fully well what "Room Tempreature Vulvanizing" is and I've worked with it for as many or more years as you. HOWEVER, BILL, I've never had to get a stripe of it approx. 4' long and 1/2" wide off of a visible painted surface. Nor has anyone else I know locally, including my body man. I thought before I had him strip it to the metal and reshoot it, as some suggested, it would be a simple GOD DAMN question to ask on this PUBLIC FRIGGIN' JEEP FORUM! I didn't expect to be insulted by you or anyone else simply for asking this simple question! If you don't believe I have two the Jeeps, then here's an old link to Webshots with some shots of them that I set up last spring for an online article. http://community.webshots.com/photo/...37932612OWzeZc There you go, wise ass. As for my qualifications, I'm a retired Ford / Jaguar Service executive, I'm a former ASE and VW Master Tech, and I'm now President of the Creeper Jeepers Gang of Durango Colorado. I don't have to tell you all this, but I've been insulted enough to stuff it right in your arrogant face. Match me, Mr. "Real Jeep" know-it-all with your qualifications if you dare. I may accept your apology, once it's given. Until then, Bill, understand that I think you're a friggin' idiot. |
#25
|
|||
|
|||
Jerry,
Moderated forums are usually just as productive, as usenet, anymore, without all the self-appointed Gods jumping you from all sides. Coming in this place requires steel-plated egos and a HIGH tolerance for abuse. -- mark "SoK66" > wrote in message ... > > "L.W. ("ßill") Hughes III" > wrote in message > ... >> More F**Kin' BULL SH*T! Anyone with that amount of modifications on >> a YJ knows what "Room-Temperature Vulcanizing" is, and how to work with >> it! Like all trolls, you haven't the balls to sign your posts, nor use a >> real address, and further spoof your address with "newsdawg", therefo >> you are a TROLL and LIAR! And frankly, insulting to our intelligence. >> God Bless America, ßill O|||||||O > > Ok, Bill, I've had enough, here goes: I've posted on this forum for years > as Jerry McG. Not that it's any of your friggin' > business, but I changed my screen name to SoK66 a few weeks ago and > altered the e-mail to stop all the God damn usenet-scanned porno and other > bull**** from filling up my in box, viruses and all. > > I know fully well what "Room Tempreature Vulvanizing" is and I've worked > with it for as many or more years as you. HOWEVER, BILL, I've never had to > get a stripe of it approx. 4' long and 1/2" wide off of a visible painted > surface. Nor has anyone else I know locally, including my body man. > > I thought before I had him strip it to the metal and reshoot it, as some > suggested, it would be a simple GOD DAMN question to ask on this PUBLIC > FRIGGIN' JEEP FORUM! I didn't expect to be insulted by you or anyone else > simply for asking this simple question! > > If you don't believe I have two the Jeeps, then here's an old link to > Webshots with some shots of them that I set up last spring for an online > article. > > http://community.webshots.com/photo/...37932612OWzeZc > > There you go, wise ass. > > As for my qualifications, I'm a retired Ford / Jaguar Service executive, > I'm a former ASE and VW Master Tech, and I'm now President of the Creeper > Jeepers Gang of Durango Colorado. I don't have to tell you all this, but > I've been insulted enough to stuff it right in your arrogant face. Match > me, > Mr. "Real Jeep" know-it-all with your qualifications if you dare. I may > accept your apology, once it's given. Until then, Bill, understand > that I think you're a friggin' idiot. > > > > > > > > |
#26
|
|||
|
|||
Jerry,
Moderated forums are usually just as productive, as usenet, anymore, without all the self-appointed Gods jumping you from all sides. Coming in this place requires steel-plated egos and a HIGH tolerance for abuse. -- mark "SoK66" > wrote in message ... > > "L.W. ("ßill") Hughes III" > wrote in message > ... >> More F**Kin' BULL SH*T! Anyone with that amount of modifications on >> a YJ knows what "Room-Temperature Vulcanizing" is, and how to work with >> it! Like all trolls, you haven't the balls to sign your posts, nor use a >> real address, and further spoof your address with "newsdawg", therefo >> you are a TROLL and LIAR! And frankly, insulting to our intelligence. >> God Bless America, ßill O|||||||O > > Ok, Bill, I've had enough, here goes: I've posted on this forum for years > as Jerry McG. Not that it's any of your friggin' > business, but I changed my screen name to SoK66 a few weeks ago and > altered the e-mail to stop all the God damn usenet-scanned porno and other > bull**** from filling up my in box, viruses and all. > > I know fully well what "Room Tempreature Vulvanizing" is and I've worked > with it for as many or more years as you. HOWEVER, BILL, I've never had to > get a stripe of it approx. 4' long and 1/2" wide off of a visible painted > surface. Nor has anyone else I know locally, including my body man. > > I thought before I had him strip it to the metal and reshoot it, as some > suggested, it would be a simple GOD DAMN question to ask on this PUBLIC > FRIGGIN' JEEP FORUM! I didn't expect to be insulted by you or anyone else > simply for asking this simple question! > > If you don't believe I have two the Jeeps, then here's an old link to > Webshots with some shots of them that I set up last spring for an online > article. > > http://community.webshots.com/photo/...37932612OWzeZc > > There you go, wise ass. > > As for my qualifications, I'm a retired Ford / Jaguar Service executive, > I'm a former ASE and VW Master Tech, and I'm now President of the Creeper > Jeepers Gang of Durango Colorado. I don't have to tell you all this, but > I've been insulted enough to stuff it right in your arrogant face. Match > me, > Mr. "Real Jeep" know-it-all with your qualifications if you dare. I may > accept your apology, once it's given. Until then, Bill, understand > that I think you're a friggin' idiot. > > > > > > > > |
#27
|
|||
|
|||
"mark" > wrote in message news:L0tsd.195469$hj.76919@fed1read07... > Jerry, > Moderated forums are usually just as productive, as usenet, anymore, > without all the self-appointed Gods jumping you from all sides. Coming in > this place requires steel-plated egos and a HIGH tolerance for abuse. > mark Thanks, Mark. Never had this kind of crap happen here before, an attitude adjustment is definitely in order for a couple of people. Best, Jerry McG. > > "SoK66" > wrote in message > ... >> >> "L.W. ("ßill") Hughes III" > wrote in message >> ... >>> More F**Kin' BULL SH*T! Anyone with that amount of modifications on >>> a YJ knows what "Room-Temperature Vulcanizing" is, and how to work with >>> it! Like all trolls, you haven't the balls to sign your posts, nor use a >>> real address, and further spoof your address with "newsdawg", therefo >>> you are a TROLL and LIAR! And frankly, insulting to our intelligence. >>> God Bless America, ßill O|||||||O >> >> Ok, Bill, I've had enough, here goes: I've posted on this forum for years >> as Jerry McG. Not that it's any of your friggin' >> business, but I changed my screen name to SoK66 a few weeks ago and >> altered the e-mail to stop all the God damn usenet-scanned porno and >> other bull**** from filling up my in box, viruses and all. >> >> I know fully well what "Room Tempreature Vulvanizing" is and I've worked >> with it for as many or more years as you. HOWEVER, BILL, I've never had >> to get a stripe of it approx. 4' long and 1/2" wide off of a visible >> painted surface. Nor has anyone else I know locally, including my body >> man. >> >> I thought before I had him strip it to the metal and reshoot it, as some >> suggested, it would be a simple GOD DAMN question to ask on this PUBLIC >> FRIGGIN' JEEP FORUM! I didn't expect to be insulted by you or anyone else >> simply for asking this simple question! >> >> If you don't believe I have two the Jeeps, then here's an old link to >> Webshots with some shots of them that I set up last spring for an online >> article. >> >> http://community.webshots.com/photo/...37932612OWzeZc >> >> There you go, wise ass. >> >> As for my qualifications, I'm a retired Ford / Jaguar Service executive, >> I'm a former ASE and VW Master Tech, and I'm now President of the Creeper >> Jeepers Gang of Durango Colorado. I don't have to tell you all this, but >> I've been insulted enough to stuff it right in your arrogant face. Match >> me, >> Mr. "Real Jeep" know-it-all with your qualifications if you dare. I may >> accept your apology, once it's given. Until then, Bill, understand >> that I think you're a friggin' idiot. >> >> >> >> >> >> >> >> > > |
#28
|
|||
|
|||
"mark" > wrote in message news:L0tsd.195469$hj.76919@fed1read07... > Jerry, > Moderated forums are usually just as productive, as usenet, anymore, > without all the self-appointed Gods jumping you from all sides. Coming in > this place requires steel-plated egos and a HIGH tolerance for abuse. > mark Thanks, Mark. Never had this kind of crap happen here before, an attitude adjustment is definitely in order for a couple of people. Best, Jerry McG. > > "SoK66" > wrote in message > ... >> >> "L.W. ("ßill") Hughes III" > wrote in message >> ... >>> More F**Kin' BULL SH*T! Anyone with that amount of modifications on >>> a YJ knows what "Room-Temperature Vulcanizing" is, and how to work with >>> it! Like all trolls, you haven't the balls to sign your posts, nor use a >>> real address, and further spoof your address with "newsdawg", therefo >>> you are a TROLL and LIAR! And frankly, insulting to our intelligence. >>> God Bless America, ßill O|||||||O >> >> Ok, Bill, I've had enough, here goes: I've posted on this forum for years >> as Jerry McG. Not that it's any of your friggin' >> business, but I changed my screen name to SoK66 a few weeks ago and >> altered the e-mail to stop all the God damn usenet-scanned porno and >> other bull**** from filling up my in box, viruses and all. >> >> I know fully well what "Room Tempreature Vulvanizing" is and I've worked >> with it for as many or more years as you. HOWEVER, BILL, I've never had >> to get a stripe of it approx. 4' long and 1/2" wide off of a visible >> painted surface. Nor has anyone else I know locally, including my body >> man. >> >> I thought before I had him strip it to the metal and reshoot it, as some >> suggested, it would be a simple GOD DAMN question to ask on this PUBLIC >> FRIGGIN' JEEP FORUM! I didn't expect to be insulted by you or anyone else >> simply for asking this simple question! >> >> If you don't believe I have two the Jeeps, then here's an old link to >> Webshots with some shots of them that I set up last spring for an online >> article. >> >> http://community.webshots.com/photo/...37932612OWzeZc >> >> There you go, wise ass. >> >> As for my qualifications, I'm a retired Ford / Jaguar Service executive, >> I'm a former ASE and VW Master Tech, and I'm now President of the Creeper >> Jeepers Gang of Durango Colorado. I don't have to tell you all this, but >> I've been insulted enough to stuff it right in your arrogant face. Match >> me, >> Mr. "Real Jeep" know-it-all with your qualifications if you dare. I may >> accept your apology, once it's given. Until then, Bill, understand >> that I think you're a friggin' idiot. >> >> >> >> >> >> >> >> > > |
#29
|
|||
|
|||
Where's the fifty grand in that YJ? That's one more lie!
God Bless America, ßill O|||||||O http://www.billhughes.com/ SoK66 wrote: > > Ok, Bill, I've had enough, here goes: I've posted on this forum for years as > Jerry McG. Not that it's any of your friggin' > business, but I changed my screen name to SoK66 a few weeks ago and altered > the e-mail to stop all the God damn usenet-scanned porno and other bull**** > from filling up my in box, viruses and all. > > I know fully well what "Room Tempreature Vulvanizing" is and I've worked > with it for as many or more years as you. HOWEVER, BILL, I've never had to > get a stripe of it approx. 4' long and 1/2" wide off of a visible painted > surface. Nor has anyone else I know locally, including my body man. > > I thought before I had him strip it to the metal and reshoot it, as some > suggested, it would be a simple GOD DAMN question to ask on this PUBLIC > FRIGGIN' JEEP FORUM! I didn't expect to be insulted by you or anyone else > simply for asking this simple question! > > If you don't believe I have two the Jeeps, then here's an old link to > Webshots with some shots of them that I set up last spring for an online > article. > > http://community.webshots.com/photo/...37932612OWzeZc > > There you go, wise ass. > > As for my qualifications, I'm a retired Ford / Jaguar Service executive, I'm > a former ASE and VW Master Tech, and I'm now President of the Creeper > Jeepers Gang of Durango Colorado. I don't have to tell you all this, but > I've been insulted enough to stuff it right in your arrogant face. Match me, > Mr. "Real Jeep" know-it-all with your qualifications if you dare. I may > accept your apology, once it's given. Until then, Bill, understand > that I think you're a friggin' idiot. |
#30
|
|||
|
|||
Where's the fifty grand in that YJ? That's one more lie!
God Bless America, ßill O|||||||O http://www.billhughes.com/ SoK66 wrote: > > Ok, Bill, I've had enough, here goes: I've posted on this forum for years as > Jerry McG. Not that it's any of your friggin' > business, but I changed my screen name to SoK66 a few weeks ago and altered > the e-mail to stop all the God damn usenet-scanned porno and other bull**** > from filling up my in box, viruses and all. > > I know fully well what "Room Tempreature Vulvanizing" is and I've worked > with it for as many or more years as you. HOWEVER, BILL, I've never had to > get a stripe of it approx. 4' long and 1/2" wide off of a visible painted > surface. Nor has anyone else I know locally, including my body man. > > I thought before I had him strip it to the metal and reshoot it, as some > suggested, it would be a simple GOD DAMN question to ask on this PUBLIC > FRIGGIN' JEEP FORUM! I didn't expect to be insulted by you or anyone else > simply for asking this simple question! > > If you don't believe I have two the Jeeps, then here's an old link to > Webshots with some shots of them that I set up last spring for an online > article. > > http://community.webshots.com/photo/...37932612OWzeZc > > There you go, wise ass. > > As for my qualifications, I'm a retired Ford / Jaguar Service executive, I'm > a former ASE and VW Master Tech, and I'm now President of the Creeper > Jeepers Gang of Durango Colorado. I don't have to tell you all this, but > I've been insulted enough to stuff it right in your arrogant face. Match me, > Mr. "Real Jeep" know-it-all with your qualifications if you dare. I may > accept your apology, once it's given. Until then, Bill, understand > that I think you're a friggin' idiot. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
'90 Plymouth Acclaim / do it yourself auto paint | captain20018 | Dodge | 0 | November 8th 04 06:35 PM |
..Removing paint from Rear Bumper... | [email protected] | Chrysler | 6 | October 27th 04 09:51 PM |
paint chips & touchup paint (brush on vs. aerosol) | Steve W. | Honda | 1 | September 22nd 04 03:40 PM |