If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
***PING*** DAD*** a little help please!
I have a 90 c4 6 speed. Im at my place in Florida for the winter and all my mauals are back in Maryland. Yesterday my "change oil light" came on and for the life of me I cant remember how to reset it. Could you possible help? I would greatly appreciate it. Thanks Ron |
Ads |
#2
|
|||
|
|||
***PING*** DAD*** a little help please!
> wrote in message ... > > I have a 90 c4 6 speed. Im at my place in Florida for the winter and > all my mauals are back in Maryland. Yesterday my "change oil light" > came on and for the life of me I cant remember how to reset it. > Could > you possible help? I would greatly appreciate it. > Thanks > Ron > Not sure about the '90 but my '92 was turn on the ignition but do not start the engine. Press and release the eng/met button twice within five seconds. Within the next five seconds hold down the gages button (may be the range button on yours), the change oil light should flash. Continue to hold down the button until the change oil light quits flashing, reset is complete. If this fails then switch off the key and then back on to do it again. |
#4
|
|||
|
|||
***PING*** DAD*** a little help please! ----THANKS-----
It worked exactly as you said.
Thanks Ron On Wed, 19 Jan 2011 13:56:24 -0500, "Dad" > wrote: > > wrote in message .. . >> >> I have a 90 c4 6 speed. Im at my place in Florida for the winter and >> all my mauals are back in Maryland. Yesterday my "change oil light" >> came on and for the life of me I cant remember how to reset it. >> Could >> you possible help? I would greatly appreciate it. >> Thanks >> Ron >> >Not sure about the '90 but my '92 was turn on the ignition but do not >start the engine. > >Press and release the eng/met button twice within five seconds. > >Within the next five seconds hold down the gages button (may be the >range button on yours), the change oil light should flash. > >Continue to hold down the button until the change oil light quits >flashing, reset is complete. > >If this fails then switch off the key and then back on to do it again. > |
#5
|
|||
|
|||
***PING*** DAD*** a little help please! ----THANKS-----
Range or gage button?
> wrote in message ... > It worked exactly as you said. > Thanks > Ron > > On Wed, 19 Jan 2011 13:56:24 -0500, "Dad" > > wrote: > >> > wrote in message . .. >>> >>> I have a 90 c4 6 speed. Im at my place in Florida for the winter >>> and >>> all my mauals are back in Maryland. Yesterday my "change oil >>> light" >>> came on and for the life of me I cant remember how to reset it. >>> Could >>> you possible help? I would greatly appreciate it. >>> Thanks >>> Ron >>> >>Not sure about the '90 but my '92 was turn on the ignition but do >>not >>start the engine. >> >>Press and release the eng/met button twice within five seconds. >> >>Within the next five seconds hold down the gages button (may be the >>range button on yours), the change oil light should flash. >> >>Continue to hold down the button until the change oil light quits >>flashing, reset is complete. >> >>If this fails then switch off the key and then back on to do it >>again. >> |
#6
|
|||
|
|||
***PING*** DAD*** a little help please! ----THANKS-----
Mine said range.
On Thu, 20 Jan 2011 11:41:40 -0500, "Dad" > wrote: >Range or gage button? > > wrote in message .. . >> It worked exactly as you said. >> Thanks >> Ron >> >> On Wed, 19 Jan 2011 13:56:24 -0500, "Dad" > >> wrote: >> >>> > wrote in message ... >>>> >>>> I have a 90 c4 6 speed. Im at my place in Florida for the winter >>>> and >>>> all my mauals are back in Maryland. Yesterday my "change oil >>>> light" >>>> came on and for the life of me I cant remember how to reset it. >>>> Could >>>> you possible help? I would greatly appreciate it. >>>> Thanks >>>> Ron >>>> >>>Not sure about the '90 but my '92 was turn on the ignition but do >>>not >>>start the engine. >>> >>>Press and release the eng/met button twice within five seconds. >>> >>>Within the next five seconds hold down the gages button (may be the >>>range button on yours), the change oil light should flash. >>> >>>Continue to hold down the button until the change oil light quits >>>flashing, reset is complete. >>> >>>If this fails then switch off the key and then back on to do it >>>again. >>> |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ping DAD | ZÿRiX | Corvette | 1 | September 9th 06 11:51 AM |
Ping Dad | Anon | Corvette | 5 | July 13th 06 11:29 PM |
Ping Dad | Anon | Corvette | 6 | July 4th 06 06:27 PM |
Ping Dad | Anon | Corvette | 1 | June 24th 06 05:43 PM |
Ping: Dad | CardsFan | Corvette | 2 | November 14th 05 02:48 AM |