If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
BMW lifetime digital tire pressure gauge
I have one of those "lifetime" guages that reads in PSI to a 0.5 PSI
accuracy. The beeper sound was weak, then today it showed an "L" instead of a pressure reading, so I removed the CR2032 battery, and put a new one in a few hours later. Now it shows "01.0" when I read something that is at least 30 PSI, and does not beep. Does the unit need calibrating, or pitched away? Will BMW honor any sort of lifetime warranty? TIA |
Ads |
#2
|
|||
|
|||
BMW lifetime digital tire pressure gauge
Probably needs calibrating.
On most you just sorta "zap it" with air quickly. put it on the stem & pull it off just fast enough to let some air out. The manual-lete should have procedure. I would suspect bmw would honor it; if you have the paper work. On Fri, 22 Dec 2006 03:08:31 GMT, Opossum > wrote: >I have one of those "lifetime" guages that reads in PSI to a 0.5 PSI >accuracy. The beeper sound was weak, then today it showed an "L" >instead of a pressure reading, so I removed the CR2032 battery, and >put a new one in a few hours later. >Now it shows "01.0" when I read something that is at least 30 PSI, and >does not beep. > >Does the unit need calibrating, or pitched away? Will BMW honor any >sort of lifetime warranty? TIA --- AntiSpam/harvest --- Remove X's to send email to me. |
#3
|
|||
|
|||
BMW lifetime digital tire pressure gauge
"Opossum" > wrote in message ... >I have one of those "lifetime" guages that reads in PSI to a 0.5 PSI > accuracy. The beeper sound was weak, then today it showed an "L" > instead of a pressure reading, so I removed the CR2032 battery, and > put a new one in a few hours later. > Now it shows "01.0" when I read something that is at least 30 PSI, and > does not beep. > > Does the unit need calibrating, or pitched away? Will BMW honor any > sort of lifetime warranty? TIA Try taking the battery out for 30s and then reinsert it. |
#4
|
|||
|
|||
BMW lifetime digital tire pressure gauge
"R. Mark Clayton" > wrote:
> >"Opossum" > wrote in message .. . >>I have one of those "lifetime" guages that reads in PSI to a 0.5 PSI >> accuracy. The beeper sound was weak, then today it showed an "L" >> instead of a pressure reading, so I removed the CR2032 battery, and >> put a new one in a few hours later. >> Now it shows "01.0" when I read something that is at least 30 PSI, and >> does not beep. >> >> Does the unit need calibrating, or pitched away? Will BMW honor any >> sort of lifetime warranty? TIA > >Try taking the battery out for 30s and then reinsert it. > Tried it, waited overnight, did the "blip" zero calibration test, still shows "01.0" for about 10-15 seconds. Original battery causes the same. I have the card that came with the gauge. Says 20 year life on the battery, how to zero the gauge and to send it to the factory on seeing "L" for a free replacement. China? Right. I'll take it and the receipt to the dealer and swap it out. I'm not a believer in lifetime batteries or "no user servicable parts inside." Thanks! |
#5
|
|||
|
|||
BMW lifetime digital tire pressure gauge
****er it's gone belly up -- on the flip side; the dealer should swap it out; HOWEVER, if the warranty is on the battery, not the unit <dot> <dot><dot> I have a guage I got at a chain-store for like $2.99 still works fine. So if they don't warranty it; I'd look elsewhere. Let us know what they say/do On Fri, 22 Dec 2006 18:31:35 GMT, Opossum > wrote: >"R. Mark Clayton" > wrote: > >> >>"Opossum" > wrote in message . .. >>>I have one of those "lifetime" guages that reads in PSI to a 0.5 PSI >>> accuracy. The beeper sound was weak, then today it showed an "L" >>> instead of a pressure reading, so I removed the CR2032 battery, and >>> put a new one in a few hours later. >>> Now it shows "01.0" when I read something that is at least 30 PSI, and >>> does not beep. >>> >>> Does the unit need calibrating, or pitched away? Will BMW honor any >>> sort of lifetime warranty? TIA >> >>Try taking the battery out for 30s and then reinsert it. >> > >Tried it, waited overnight, did the "blip" zero calibration test, >still shows "01.0" for about 10-15 seconds. Original battery causes >the same. I have the card that came with the gauge. Says 20 year life >on the battery, how to zero the gauge and to send it to the factory on >seeing "L" for a free replacement. China? Right. I'll take it and >the receipt to the dealer and swap it out. >I'm not a believer in lifetime batteries or "no user servicable parts >inside." >Thanks! --- AntiSpam/harvest --- Remove X's to send email to me. |
#6
|
|||
|
|||
BMW lifetime digital tire pressure gauge
Josh Assing > wrote:
[snip] I took the gauge, receipt and card to the dealer. Mentioned a low battery and things. Not sure if they heard everything I said. The guy at the parts counter opened up another package, took out the gauge, noted my customer # from the receipt (which was from their old system), took the bad gauge, and off I went. The card (from the sales pack) did say that if the unit doesn't read properly, send it to the factory for free replacement. |
#7
|
|||
|
|||
BMW lifetime digital tire pressure gauge
OUTSTANDING!!!!
Great that they owned up to the warranty & replaced it -- who cares what the parts dweeb thought or didn't-hear right? On Sun, 24 Dec 2006 16:15:47 GMT, Opossum > wrote: >Josh Assing > wrote: > >[snip] > >I took the gauge, receipt and card to the dealer. Mentioned a low >battery and things. Not sure if they heard everything I said. The >guy at the parts counter opened up another package, took out the >gauge, noted my customer # from the receipt (which was from their old >system), took the bad gauge, and off I went. > >The card (from the sales pack) did say that if the unit doesn't read >properly, send it to the factory for free replacement. --- AntiSpam/harvest --- Remove X's to send email to me. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Oil Pressure Gauge and Engine death | CL (dnoyeB) Gilbert | Technology | 22 | January 22nd 06 01:11 AM |
Oil pressure gauge install | Andrew Szafran | Technology | 6 | December 22nd 05 05:53 PM |
Tire Pressure Monitor | Luke | Corvette | 56 | September 3rd 05 10:11 PM |
Where to find an accurate tire pressure gauge??? | TomKan | Chrysler | 30 | August 6th 05 03:29 PM |
Tire pressure must be monitored on new models !!! | news | BMW | 2 | September 20th 04 10:24 PM |