If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#71
|
|||
|
|||
In article >,
Dori A Schmetterling > wrote: > My CLK instructions tell me to keep the spare at higher pressure. Same > on old 190E and I seem to remember this from every previous Merc. > I wonder how many of us regularly check the spare tyre pressure... it's > such a drag... My dealer on one occasion stuck a label on the spare stating the pressure (higher than normal as it should be) and the date checked at service time. I'd have been even more impressed if they'd adjusted the handbrake so it actually worked as instructed in writing, though. -- *Never slap a man who's chewing tobacco * Dave Plowman London SW To e-mail, change noise into sound. |
Ads |
#72
|
|||
|
|||
"Dave Plowman (News)" > wrote in message ... > In article >, > Dori A Schmetterling > wrote: >> My CLK instructions tell me to keep the spare at higher pressure. Same >> on old 190E and I seem to remember this from every previous Merc. > >> I wonder how many of us regularly check the spare tyre pressure... it's >> such a drag... I only WISH I had a spare to check. About a month ago I had a tire failure that the M-Mobility kit couldn't fix (large tear-not a simple puncture), so I was stuck in Smallville and no one had anything that would fit. I have since found a tire/rim package from Tirerack (relatively cheap at just over $300), that I can use on either the front or rear of my M5. It'll be going with me on any trips off the Bmwpath. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.788 / Virus Database: 533 - Release Date: 11/1/2004 |
#73
|
|||
|
|||
"Dori A Schmetterling" > wrote in message ... > My CLK instructions tell me to keep the spare at higher pressure. Same on > old 190E and I seem to remember this from every previous Merc. > > I wonder how many of us regularly check the spare tyre pressure... it's such > a drag... Ya know, this makes me wonder how the tire pressure monitors work. Is it a remote sensor that tells us our tires are low or is there a connected wire/tube/sensor that let's us know? I have always taken these things for granted but now wonder how they actually connect to each tire in order to monitor the pressure. |
#74
|
|||
|
|||
Very nasty. How did you manage to do that? At what speed?
DAS -- For direct contact replace nospam with schmetterling --- "tech27" > wrote in message . verio.net... [...] > I only WISH I had a spare to check. About a month ago I had a tire failure > that the M-Mobility kit couldn't fix (large tear-not a simple puncture), > so ................... |
#75
|
|||
|
|||
On Sat, 06 Nov 2004 07:58:07 -0700, Ramone Cila wrote:
> > "Dori A Schmetterling" > wrote in message > ... >> My CLK instructions tell me to keep the spare at higher pressure. Same >> on old 190E and I seem to remember this from every previous Merc. >> >> I wonder how many of us regularly check the spare tyre pressure... it's > such >> a drag... > > Ya know, this makes me wonder how the tire pressure monitors work. Is it a > remote sensor that tells us our tires are low or is there a connected > wire/tube/sensor that let's us know? > I belive the usual method is to compare tire speeds. A low tire will be effectively smaller in diameter and thus rotating faster. While not exactly accurate, as compared to direct pressure measurement, it is far simpler to implement needing only a speed sensor at each wheel. Since most high end cars already have the speed sensors at each wheel for stability control, the low tire warning is just a bit more code. -- The instructions said to use Windows 98 or better, so I installed RedHat. |
#76
|
|||
|
|||
On Sat, 06 Nov 2004 18:21:33 -0600, Jim Levie >
wrote: >On Sat, 06 Nov 2004 07:58:07 -0700, Ramone Cila wrote: > >> Ya know, this makes me wonder how the tire pressure monitors work. Is it a >> remote sensor that tells us our tires are low or is there a connected >> wire/tube/sensor that let's us know? >> >I belive the usual method is to compare tire speeds. A low tire will be >effectively smaller in diameter and thus rotating faster. > >While not exactly accurate, as compared to direct pressure measurement, it >is far simpler to implement needing only a speed sensor at each wheel. >Since most high end cars already have the speed sensors at each wheel for >stability control, the low tire warning is just a bit more code. Yep. That's why it can't tell you that all of them are getting low at the same time. It also needs time to be sure that one tire/wheel is *really* out of whack, which is why it doesn't tell you that you just had a blowout - like you needed something on the dash to tell you *that* - oh, hold on - I guess some people actually *could* find that useful. There are other systems out there that use RF transmissions from a sensor inside the wheel to an OBC to give actual tire pressure. -- Dan Drake |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Hmmmm, noisy...... | Catman | Alfa Romeo | 0 | December 2nd 04 09:24 PM |