If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Removing CJ7 Dash Knobs
OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru
it... I'm trying to remove the factory dash knobs with Stainless Knobs from (everybody say it with me) JC Whitney. How in God's name do you get the pulls for the Vent/Temp/Defrost off. It looks like they used SuperGlue to lock them on the metal pulls! Thanks in advance for the info |
Ads |
#2
|
|||
|
|||
Removing CJ7 Dash Knobs
JeepGuyMike wrote:
> OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru > it... > > I'm trying to remove the factory dash knobs with Stainless Knobs from > (everybody say it with me) JC Whitney. > > How in God's name do you get the pulls for the Vent/Temp/Defrost off. > It looks like they used SuperGlue to lock them on the metal pulls! > > Thanks in advance for the info > A few years ago, my vent knob on my '84 CJ snapped off and I had to replace the whole frickin' cable. What year CJ is yours? I'll look to see if mine is even removable. Pete |
#3
|
|||
|
|||
Removing CJ7 Dash Knobs
On Sep 3, 2:33 pm, Peter Stolz > wrote:
> JeepGuyMike wrote: > > OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru > > it... > > > I'm trying to remove the factory dash knobs with Stainless Knobs from > > (everybody say it with me) JC Whitney. > > > How in God's name do you get the pulls for the Vent/Temp/Defrost off. > > It looks like they used SuperGlue to lock them on the metal pulls! > > > Thanks in advance for the info > > A few years ago, my vent knob on my '84 CJ snapped off and I had to > replace the whole frickin' cable. What year CJ is yours? I'll look to > see if mine is even removable. > Pete Did you rememebr to check for the little (and sometimes hard to see) set screws that are used to hold the knobs onto the cable? You'll need a pretty small allen wrench to loosen them. No matter if they are JC Whitney or factory - I think that's the trick! Good lucK Lynn in Vancouver |
#4
|
|||
|
|||
Removing CJ7 Dash Knobs
JeepGuyMike wrote:
> OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru > it... > > I'm trying to remove the factory dash knobs with Stainless Knobs from > (everybody say it with me) JC Whitney. > > How in God's name do you get the pulls for the Vent/Temp/Defrost off. > It looks like they used SuperGlue to lock them on the metal pulls! > > Thanks in advance for the info > My 86 has a locking tab on the back of the knobs that must be pushed forward with a small screwdriver or strong fingernail from the bottom to release them, all except the headlight switch which is a rod with a button on the back of the switch to release it. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's - Gone to the rust pile... Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
57 vette dash knobs.... | ±© Flipper Mike ®³ | Corvette | 0 | July 24th 07 06:57 PM |
Removing the C3 Dash Pad | Charles Halliman | Corvette | 3 | January 20th 06 04:51 PM |
Reproduction dash knobs | Mike West | VW air cooled | 2 | December 19th 05 04:17 AM |
removing the dash of 2001 dodge neon | [email protected] | Chrysler | 1 | October 13th 05 03:51 PM |
Removing LCD from dash of C4 LT1 | Bones | Corvette | 0 | July 29th 05 02:14 AM |