If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#351
|
|||
|
|||
Running a car on water via electrolysis
On Sat, Lancaster > wrote:
>Many more references at >http://www.nutech2000.com/webtext/mi...ydrogensup.htm > >The bottom line is that the info has been available for three decades >and nobody has gotten it to work in a trucker acceptable manner. > >It took something like fifteen minutes for truckers to worldwide adopt >the above-cab fairings for mileage improvements. Why in God's name they are trying to use hydrogen or hydrogen reforming is a mystery, any fuel with high hydrogen content has to improve the diesel burn and emissions. There are hundreds of garages that are installing dual fuel systems that inject other liquid or gaseous fuels into the cylinders or individual cylinder ports while in cruise, still running all diesel at idle, and at least 20 percent diesel or more all the time. But truckers don't like carrying certain fuels because of the fire hazard in accidents. As ethanol is used more in high visibility events like the Indy 500, there will be more truckers willing to use ethanol induction both for better burn and for lower cost if oil prices stay high or go up more. Incidently, the refineries must be catching up on production after the change over to low sulfur diesel, I saw the price differential down to 15 cents yesterday. Joe Fischer |
Ads |
#352
|
|||
|
|||
Running a car on water via electrolysis
In article >, Don Lancaster says...
> Many more references at > http://www.nutech2000.com/webtext/mi...ydrogensup.htm > > The bottom line is that the info has been available for three decades > and nobody has gotten it to work in a trucker acceptable manner. These guys claim to have: http://chechfi.ca/sohfitech.htm They havn't been around long enough for overnight adoption and I don't know of independant tests. Robert -- Posted via a free Usenet account from http://www.teranews.com |
#353
|
|||
|
|||
Running a car on water via electrolysis
Robert Adsett wrote:
> In article >, Don Lancaster says... > >>Many more references at >>http://www.nutech2000.com/webtext/mi...ydrogensup.htm >> >>The bottom line is that the info has been available for three decades >>and nobody has gotten it to work in a trucker acceptable manner. > > > These guys claim to have: > > http://chechfi.ca/sohfitech.htm > > They havn't been around long enough for overnight adoption and I don't > know of independant tests. > > Robert > > > > Can you spell "scam"? -- Many thanks, Don Lancaster voice phone: (928)428-4073 Synergetics 3860 West First Street Box 809 Thatcher, AZ 85552 rss: http://www.tinaja.com/whtnu.xml email: Please visit my GURU's LAIR web site at http://www.tinaja.com |
#354
|
|||
|
|||
Running a car on water via electrolysis
> > Did you say EE? :-) A 2500 HP dragline > motor with precise speed control with Silicone > Controlled Rectifiers running directly off a high > voltage AC line makes me smile. Yawn. Electric machinery that makes me smile? How about a GE 6000 HP locomotive with AC traction motors. 6000-horsepower V16 turbocharged diesel that runs with in a hair's breadth of the theoretical maximum Carnot efficiency, driving an alternator that can absorb that power. Rectify that, then feed it through a computer-controlled variable-frequency drive that converts it back into precisely controlled AC that works seamlessly with traction control to prevent wheelspin. 3 of them can replace 5 4400 horespower DC locomotives. Now THAT is a combination of electrical and mechanical engineering! |
#355
|
|||
|
|||
Running a car on water via electrolysis
On Sun, 18 Feb 2007 14:57:12 -0600, Steve > wrote:
>> Did you say EE? :-) A 2500 HP dragline >> motor with precise speed control with Silicone >> Controlled Rectifiers running directly off a high >> voltage AC line makes me smile. > >Yawn. > >Electric machinery that makes me smile? How about a GE 6000 HP >locomotive with AC traction motors. 6000-horsepower V16 turbocharged >diesel that runs with in a hair's breadth of the theoretical maximum >Carnot efficiency, driving an alternator that can absorb that power. >Rectify that, then feed it through a computer-controlled >variable-frequency drive that converts it back into precisely controlled >AC that works seamlessly with traction control to prevent wheelspin. 3 >of them can replace 5 4400 horespower DC locomotives. > >Now THAT is a combination of electrical and mechanical engineering! Can you scale that down to a car for me to drive? Joe Fischer |
#356
|
|||
|
|||
Running a car on water via electrolysis
In article >, Don Lancaster says...
> Robert Adsett wrote: > > In article >, Don Lancaster says... > > > >>Many more references at > >>http://www.nutech2000.com/webtext/mi...ydrogensup.htm > >> > >>The bottom line is that the info has been available for three decades > >>and nobody has gotten it to work in a trucker acceptable manner. > > > > > > These guys claim to have: > > > > http://chechfi.ca/sohfitech.htm > > > > They havn't been around long enough for overnight adoption and I don't > > know of independant tests. > > > > > Can you spell "scam"? Wouldn't surprise me. Robert -- Posted via a free Usenet account from http://www.teranews.com |
#357
|
|||
|
|||
Running a car on water via electrolysis
> On Sun, 18 Feb 2007 14:57:12 -0600, Steve > wrote:
> >>Electric machinery that makes me smile? How about a GE 6000 HP >>locomotive with AC traction motors. 6000-horsepower V16 turbocharged >>diesel that runs with in a hair's breadth of the theoretical maximum >>Carnot efficiency, driving an alternator that can absorb that power. >>Rectify that, then feed it through a computer-controlled >>variable-frequency drive that converts it back into precisely controlled >>AC that works seamlessly with traction control to prevent wheelspin. 3 >>of them can replace 5 4400 horespower DC locomotives. >> >>Now THAT is a combination of electrical and mechanical engineering! Joe Fischer wrote: > Can you scale that down to a car for me to drive? Already done - One example is the Toyota Prius. It uses a petrol engine using a Rankin cycle (better efficiency than a standard engine) running at basically constant RPM at optimal efficiency point when on. The energy of the engine is used to drive the wheels via an ingenious system of differentials and electronically controlled motor-generators. Toyota call it 'Hybrid Synergy Drive' - have a look at the Wikipedia, there is some good info on how it all works there. Calvin (Brisbane Australia) PS: I don't own one, but would love to when the price drops a bit more. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cleaning rusty parts with electrolysis | Jan | VW air cooled | 2 | January 24th 07 04:36 AM |
water inside car while and after running air conditioner | 2forgetmenot | Mazda | 12 | September 7th 05 04:49 AM |
Water coming from under the dash while a/c is running | sweetc_66 | Honda | 7 | August 18th 05 04:59 AM |
Where do I find the engine block water petcock to drain the engineof water??? | DPost | Ford Explorer | 3 | June 10th 05 12:32 AM |
Radiator Electrolysis | [email protected] | Chrysler | 3 | February 11th 05 10:53 PM |