If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Trouble with third gear
Here is one for you....I am using a bug transmission with a cable shifter
tin my Beck Spyder hat has worked really well. Recently, however, I has been getting more difficult going from second to third. A few times I could not finesse it in at all. I have to rev high and shift from second to third rapidly, not hard, rapidly. It downshifts great from fourth to third however. All other gears work well. Any ideas. If it was the syncro it should still go in if I match rpm with speed, and it would make a difference downshifting to third also I would think/ Questions? Answers? it is a swing axel by the way. Clutch is excellent, etc. Thanks, Joe Gliebe |
Ads |
#2
|
|||
|
|||
Joe Gliebe wrote:
> Here is one for you....I am using a bug transmission with a cable shifter > tin my Beck Spyder hat has worked really well. Recently, however, I has > been getting more difficult going from second to third. A few times I could > not finesse it in at all. I have to rev high and shift from second to third > rapidly, not hard, rapidly. It downshifts great from fourth to third > however. All other gears work well. > > Any ideas. If it was the syncro it should still go in if I match rpm with > speed, and it would make a difference downshifting to third also I would > think/ > > Questions? Answers? > > it is a swing axel by the way. Clutch is excellent, etc. > > > Thanks, > Joe Gliebe > > Yeah; doesn't sound like synchro. Suppose the cable mech is not "rotating" the shift lever (inner) quite enough for 3rd. It may stall then between the 2/3 and 3/4 selectors. Can you get at the front of the nosecone to watch the rotation while shifting? Speedy Jim http://www.nls.net/mp/volks/ |
#3
|
|||
|
|||
I certainly can, it is literally in the open since it is in the back of the
car. I will try that and get back to you.......I know the cables are free, may even be overrotating it,,,,, Joe "Speedy Jim" > wrote in message ... > Joe Gliebe wrote: > >> Here is one for you....I am using a bug transmission with a cable shifter >> tin my Beck Spyder hat has worked really well. Recently, however, I has >> been getting more difficult going from second to third. A few times I >> could not finesse it in at all. I have to rev high and shift from second >> to third rapidly, not hard, rapidly. It downshifts great from fourth to >> third however. All other gears work well. >> >> Any ideas. If it was the syncro it should still go in if I match rpm >> with speed, and it would make a difference downshifting to third also I >> would think/ >> >> Questions? Answers? >> >> it is a swing axel by the way. Clutch is excellent, etc. >> >> >> Thanks, >> Joe Gliebe > Yeah; doesn't sound like synchro. > > Suppose the cable mech is not "rotating" the > shift lever (inner) quite enough for 3rd. > It may stall then between the 2/3 and 3/4 > selectors. > > Can you get at the front of the nosecone to > watch the rotation while shifting? > > Speedy Jim > http://www.nls.net/mp/volks/ |
#4
|
|||
|
|||
Are such cable shifter setups available somewhere? -BaH
"Joe Gliebe" > wrote in message . .. > I certainly can, it is literally in the open since it is in the back of the > car. I will try that and get back to you.......I know the cables are free, > may even be overrotating it,,,,, > > Joe > "Speedy Jim" > wrote in message > ... > > Joe Gliebe wrote: > > > >> Here is one for you....I am using a bug transmission with a cable shifter > >> tin my Beck Spyder hat has worked really well. Recently, however, I has > >> been getting more difficult going from second to third. A few times I > >> could not finesse it in at all. I have to rev high and shift from second > >> to third rapidly, not hard, rapidly. It downshifts great from fourth to > >> third however. All other gears work well. > >> > >> Any ideas. If it was the syncro it should still go in if I match rpm > >> with speed, and it would make a difference downshifting to third also I > >> would think/ > >> > >> Questions? Answers? > >> > >> it is a swing axel by the way. Clutch is excellent, etc. > >> > >> > >> Thanks, > >> Joe Gliebe > > Yeah; doesn't sound like synchro. > > > > Suppose the cable mech is not "rotating" the > > shift lever (inner) quite enough for 3rd. > > It may stall then between the 2/3 and 3/4 > > selectors. > > > > Can you get at the front of the nosecone to > > watch the rotation while shifting? > > > > Speedy Jim > > http://www.nls.net/mp/volks/ > > |
#5
|
|||
|
|||
From virtually every VW/buggy performance companies. CB performance,
CHIRCO, etc |
#6
|
|||
|
|||
This is tricky, especially for those not familiar with cable shifters. As
in all things that move, some metal wear will occur, same goes for the moving parts of a cable shifter and everything else that moves to shift gears in the tranny. Looks like a small amount of wear on this system amounts to an non-proportional effect on the movement in the tranny shift mechanism. Looks like the rotation was just a little too much and I was shifting as before over rotating the mechanism in the nosecone. After several disassemblies and reassemblies, I finally got it back to where it was before and do not expect this to happen again anytime soon, since the parts have now been "worn in". Thanks for the clue about "rotation" Speedy Jim. That was the key. I now REALLY understand this system. Joe Gliebe 550 Spyder 1914 with 40mm dual webers 110 cam MOFOCO 044 heads and all other appropriate mods. Now to concentrate on my cooling system Joe |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
removing gear box | Sven Agardh | VW water cooled | 1 | January 17th 05 11:48 AM |
Buzzing at startup/ring gear | SmarSquid | Honda | 1 | January 16th 05 02:46 AM |
auto trans won't downshift to 1st gear on 2000 Explorer V6 SOHC | KI0FT | Ford Explorer | 3 | December 23rd 04 01:02 AM |
Speedo gear problem | Jeff Scherb | Jeep | 2 | December 19th 04 11:57 AM |
No reverse gear on 2000 Saturn SL2 A/T | 2000SaturnSL2 | Saturn | 6 | October 6th 04 06:18 PM |