on ebay: Airesearch (Garrett) T3 turbo w/ water cooled chra

http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMESE%3AIT

used Airesearch (Garrett) T3 turbo w/ water cooled bearing section

50 trim
..42 a/r compressor
..63 a/r turbine (measures about 2.1" in diameter)

5 bolt exhaust flange with internal wastegate port welded shut. Would
need to run a separate wastegate or possibly machine the housing and
install parts needed for internal wastegate. This turbo is probably
best for parts. The compressor is a 50 trim and looks to be good for
smaller engines like 1.6l at boost 10 psi, but that is just my opion
(looking at the compressor map and calculating air volume at 6000 rpm
to be about 21 lb/min).