Best Supercharger for 04 GT ?

Id go with a ATI Pro charger...

Actually we sell any supercharger, turbo or twin turbo that is made
for 'stangs. If its not on our site, it won't suprise me as we have
over 600 manufacturers that we deal with so ...... there just isnt
enough hours in the day to get them all on there. I am, along with
the wife, also the contract writer, webmaster, sales associate, order
taker, CFO, inventory/stock, etc, etc. During the day I am an aviation
electro-mechanical engineer in the United States Navy defending your
freedoms and protecting our great nation from whomever our politicians
say the enemy is.

KB -- Never heard anything bad either.

Paxton -- Nothing but good things.

Eaton -- Kinda high, easy to rebuild lol OEM

Powerdyne -- Alas less expensive, but have yet to hear any of my
customers complain about belt issues, so I can't speak on that
matter.

Vortech -- My personal choice. Great product.

Last comment -- Personal preference divided by deep pockets!

-Tom

http://www.fastmustangparts.com/




> wrote in message .com>...
> I haven't installed a blower on my car, but I hafta agree.. I've heard
> nothing but good things about Kenne Bell & doing my own research & speaking
> with some representatives there... they seem to know what they are doing. A
> local 02 GT has a KB blown Mustang... blue.. beautiful car & runs like a
> BEAST!! Extremely torquey & gobs of HP at the top-end. I am thoroughly
> impressed. I've heard good things about Vortech as well, but as Michael
> pointed out... add in everything & you'll be right under or at the cost of a
> KB... but you don't get the torque of a KB twin-screw blower from any
> centrifugal blower .
>
> -Mike
>
> --
> A happy kid behind the wheel of a 98 Mustang GT
> Cold air intake
> FRPP 3.73 gears
> Steeda Tri-Ax Shifter
> Full Boar turbo mufflers
> Hi-speed fan switch
> 255/60R-15 rear tires
> Subframe connectors
>
>
> "Michael Johnson, PE" > wrote in message
> ...
> > Powerdyne is a poor recommendation. They brake belts and need more
> > service than just about any blower currently sold. The KB blower for
> > the '99+ GT's make more hp/psi of boost on a bone stock engine than
> > Paxton or Powerdyne. As for bang for the buck, by the time you add all
> > the items (fuel injectors, chip, etc.) KB includes in their kits the
> > centrifugal blowers will cost just as much. Something tells me that you
> > don't sell KB blowers over at fastmustangparts.
> >
> > FastAutoSports wrote:
> > > GT,
> > >
> > > Powerdyne and Paxton Superchargers will give you and your Ford Mustang
> > > the most bang for the buck. Both are comparable or better than the
> > > Kenne Bell, especially if you want to push 8psi. All three have very
> > > strong reputations, so it comes down to personal preferences and how
> > > deep your pockets are.
> > >
> > > Have a good one and Good Luck.
> > >
> > > -Tom
> > >
> > > Fast Auto Sports
> > >
> > > http://www.fastmustangparts.com/
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > "Recon_" > wrote in message
> link.net>...
> > >
> > >>Hi All,
> > >>
> > >> I have an 04 40th Anniversary GT Vert and have been looking into
> > >>supercharger kits. I'm leaning towards a Kenne Bell intercooled
> > >>@ 8psi from what Ive researched, but wanted to get input from some
> > >>people who have installed one.
> > >>
> > >> Any opinions or tips would be much appreciated.
> > >>
> > >>thanks,
> > >>
> > >>GT

This was a nice "politically correct" response from someone trying to
mine for potential new customers. The fact you don't know about the
well known and long standing issues with Powerdyne blowers makes me
wonder how much you actually know about superchargers in general. We're
a fairly tight knit group here and we try to share knowledge with each
other to keep someone from making a bad decision. I, for one, am always
skeptical of anyone recommending products they sell. I bet you don't
sell KB blowers hence the weighting of your original response toward
blowers you probably do sell and can make a profit from. Maybe I'm
being cynical but then again maybe I'm not.

FastAutoSports wrote:
> Actually we sell any supercharger, turbo or twin turbo that is made
> for 'stangs. If its not on our site, it won't suprise me as we have
> over 600 manufacturers that we deal with so ...... there just isnt
> enough hours in the day to get them all on there. I am, along with
> the wife, also the contract writer, webmaster, sales associate, order
> taker, CFO, inventory/stock, etc, etc. During the day I am an aviation
> electro-mechanical engineer in the United States Navy defending your
> freedoms and protecting our great nation from whomever our politicians
> say the enemy is.
>
> KB -- Never heard anything bad either.
>
> Paxton -- Nothing but good things.
>
> Eaton -- Kinda high, easy to rebuild lol OEM
>
> Powerdyne -- Alas less expensive, but have yet to hear any of my
> customers complain about belt issues, so I can't speak on that
> matter.
>
> Vortech -- My personal choice. Great product.
>
> Last comment -- Personal preference divided by deep pockets!
>
> -Tom
>
> http://www.fastmustangparts.com/
>
>
>
>
> > wrote in message .com>...
>
>>I haven't installed a blower on my car, but I hafta agree.. I've heard
>>nothing but good things about Kenne Bell & doing my own research & speaking
>>with some representatives there... they seem to know what they are doing. A
>>local 02 GT has a KB blown Mustang... blue.. beautiful car & runs like a
>>BEAST!! Extremely torquey & gobs of HP at the top-end. I am thoroughly
>>impressed. I've heard good things about Vortech as well, but as Michael
>>pointed out... add in everything & you'll be right under or at the cost of a
>>KB... but you don't get the torque of a KB twin-screw blower from any
>>centrifugal blower .
>>
>>-Mike
>>
>>--
>>A happy kid behind the wheel of a 98 Mustang GT
>>Cold air intake
>>FRPP 3.73 gears
>>Steeda Tri-Ax Shifter
>>Full Boar turbo mufflers
>>Hi-speed fan switch
>>255/60R-15 rear tires
>>Subframe connectors
>>
>>
>>"Michael Johnson, PE" > wrote in message
...
>>
>>>Powerdyne is a poor recommendation. They brake belts and need more
>>>service than just about any blower currently sold. The KB blower for
>>>the '99+ GT's make more hp/psi of boost on a bone stock engine than
>>>Paxton or Powerdyne. As for bang for the buck, by the time you add all
>>>the items (fuel injectors, chip, etc.) KB includes in their kits the
>>>centrifugal blowers will cost just as much. Something tells me that you
>>>don't sell KB blowers over at fastmustangparts.
>>>
>>>FastAutoSports wrote:
>>>
>>>>GT,
>>>>
>>>>Powerdyne and Paxton Superchargers will give you and your Ford Mustang
>>>>the most bang for the buck. Both are comparable or better than the
>>>>Kenne Bell, especially if you want to push 8psi. All three have very
>>>>strong reputations, so it comes down to personal preferences and how
>>>>deep your pockets are.
>>>>
>>>>Have a good one and Good Luck.
>>>>
>>>>-Tom
>>>>
>>>>Fast Auto Sports
>>>>
>>>>http://www.fastmustangparts.com/

>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>"Recon_" > wrote in message
>>
>> link.net>...
>>
>>>>>Hi All,
>>>>>
>>>>> I have an 04 40th Anniversary GT Vert and have been looking into
>>>>>supercharger kits. I'm leaning towards a Kenne Bell intercooled
>>>>>@ 8psi from what Ive researched, but wanted to get input from some
>>>>>people who have installed one.
>>>>>
>>>>> Any opinions or tips would be much appreciated.
>>>>>
>>>>>thanks,
>>>>>
>>>>>GT

Seconded.

-Mike

--
A happy kid behind the wheel of a 98 Mustang GT
Cold air intake
FRPP 3.73 gears
Steeda Tri-Ax Shifter
Full Boar turbo mufflers
Hi-speed fan switch
255/60R-15 rear tires
Subframe connectors


"Michael Johnson, PE" > wrote in message
...
> This was a nice "politically correct" response from someone trying to
> mine for potential new customers. The fact you don't know about the
> well known and long standing issues with Powerdyne blowers makes me
> wonder how much you actually know about superchargers in general. We're
> a fairly tight knit group here and we try to share knowledge with each
> other to keep someone from making a bad decision. I, for one, am always
> skeptical of anyone recommending products they sell. I bet you don't
> sell KB blowers hence the weighting of your original response toward
> blowers you probably do sell and can make a profit from. Maybe I'm
> being cynical but then again maybe I'm not.
>
> FastAutoSports wrote:
> > Actually we sell any supercharger, turbo or twin turbo that is made
> > for 'stangs. If its not on our site, it won't suprise me as we have
> > over 600 manufacturers that we deal with so ...... there just isnt
> > enough hours in the day to get them all on there. I am, along with
> > the wife, also the contract writer, webmaster, sales associate, order
> > taker, CFO, inventory/stock, etc, etc. During the day I am an aviation
> > electro-mechanical engineer in the United States Navy defending your
> > freedoms and protecting our great nation from whomever our politicians
> > say the enemy is.
> >
> > KB -- Never heard anything bad either.
> >
> > Paxton -- Nothing but good things.
> >
> > Eaton -- Kinda high, easy to rebuild lol OEM
> >
> > Powerdyne -- Alas less expensive, but have yet to hear any of my
> > customers complain about belt issues, so I can't speak on that
> > matter.
> >
> > Vortech -- My personal choice. Great product.
> >
> > Last comment -- Personal preference divided by deep pockets!
> >
> > -Tom
> >
> > http://www.fastmustangparts.com/
> >
> >
> >
> >
> > > wrote in message
.com>...
> >
> >>I haven't installed a blower on my car, but I hafta agree.. I've heard
> >>nothing but good things about Kenne Bell & doing my own research &
speaking
> >>with some representatives there... they seem to know what they are
doing. A
> >>local 02 GT has a KB blown Mustang... blue.. beautiful car & runs like a
> >>BEAST!! Extremely torquey & gobs of HP at the top-end. I am thoroughly
> >>impressed. I've heard good things about Vortech as well, but as Michael
> >>pointed out... add in everything & you'll be right under or at the cost
of a
> >>KB... but you don't get the torque of a KB twin-screw blower from any
> >>centrifugal blower .
> >>
> >>-Mike
> >>
> >>--
> >>A happy kid behind the wheel of a 98 Mustang GT
> >>Cold air intake
> >>FRPP 3.73 gears
> >>Steeda Tri-Ax Shifter
> >>Full Boar turbo mufflers
> >>Hi-speed fan switch
> >>255/60R-15 rear tires
> >>Subframe connectors
> >>
> >>
> >>"Michael Johnson, PE" > wrote in message
> ...
> >>
> >>>Powerdyne is a poor recommendation. They brake belts and need more
> >>>service than just about any blower currently sold. The KB blower for
> >>>the '99+ GT's make more hp/psi of boost on a bone stock engine than
> >>>Paxton or Powerdyne. As for bang for the buck, by the time you add all
> >>>the items (fuel injectors, chip, etc.) KB includes in their kits the
> >>>centrifugal blowers will cost just as much. Something tells me that
you
> >>>don't sell KB blowers over at fastmustangparts.
> >>>
> >>>FastAutoSports wrote:
> >>>
> >>>>GT,
> >>>>
> >>>>Powerdyne and Paxton Superchargers will give you and your Ford Mustang
> >>>>the most bang for the buck. Both are comparable or better than the
> >>>>Kenne Bell, especially if you want to push 8psi. All three have very
> >>>>strong reputations, so it comes down to personal preferences and how
> >>>>deep your pockets are.
> >>>>
> >>>>Have a good one and Good Luck.
> >>>>
> >>>>-Tom
> >>>>
> >>>>Fast Auto Sports
> >>>>
> >>>>http://www.fastmustangparts.com/
>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>"Recon_" > wrote in message
> >>
> >> link.net>...
> >>
> >>>>>Hi All,
> >>>>>
> >>>>> I have an 04 40th Anniversary GT Vert and have been looking into
> >>>>>supercharger kits. I'm leaning towards a Kenne Bell intercooled
> >>>>>@ 8psi from what Ive researched, but wanted to get input from some
> >>>>>people who have installed one.
> >>>>>
> >>>>> Any opinions or tips would be much appreciated.
> >>>>>
> >>>>>thanks,
> >>>>>
> >>>>>GT

ATI can make some good top end hp power but forget the low end grunt.
Also, they are harder (i.e. more expensive) to install since they use an
air-air intercooler. The KB replaces the intake manifold with a much
more efficient, higher flowing part. This is what gives them an edge
over centrifugals in high rpm hp. Also, I've seen many complaints about
leaking seals on ATI blowers.

BeverlyOmasta wrote:
> Id go with a ATI Pro charger...

People People People,

One, I don't need to go "mining". My customers and dealers do a great
job. Two, I will admit that I am not a "know it all" Sorry. But I
never said I was. When you deal with over 600 manufacturers, its kinda
hard to know EVERYTHING about EVERY product they make. And if someone
says they do, well I guess they are a "know it all". But since I am
only 31 years old, I can't possibly know everything, YET But my
ego does tell me I know quite a bit about alot of things.

My comments about Powerdyne were based SOLELY on my experiences with
my customers. None of those 300-something people have had any
problems. Future problems?, maybe they will, maybe they won't. Hell,
I bet I can have a comment on just about anything, just like you.

If I was smarter, (like I said, I am not a "know it all"), I would
have recommended ATI or Vortech, because it makes more "business
sense" for me

Have had an Eaton or two come back, but things brake, all
manufacturers have QA departments, so obviously none of them are
perfect. Funny, but those two also bought a KB at a later time. So
maybe they share your opinions.

So yes you are probably being cynical, but thats ok, that's why I
serve our country everyday, so you and others can be.

The gentleman asked for some opinions and recommendations, and I gave
mine, based on my customers feedback and experience.

Others have gave thier opinions and I have not "jumped" on them like
flies on, well you know...............

Like I said, PERSONAL PREFERENCE AND DEEP POCKETS!!!

Oh BTW, send me a KB part # and I will send a price.

Have a good evening.

-Tom


> wrote in message .com>...
> Seconded.
>
> -Mike
>
> --
> A happy kid behind the wheel of a 98 Mustang GT
> Cold air intake
> FRPP 3.73 gears
> Steeda Tri-Ax Shifter
> Full Boar turbo mufflers
> Hi-speed fan switch
> 255/60R-15 rear tires
> Subframe connectors
>
>
> "Michael Johnson, PE" > wrote in message
> ...
> > This was a nice "politically correct" response from someone trying to
> > mine for potential new customers. The fact you don't know about the
> > well known and long standing issues with Powerdyne blowers makes me
> > wonder how much you actually know about superchargers in general. We're
> > a fairly tight knit group here and we try to share knowledge with each
> > other to keep someone from making a bad decision. I, for one, am always
> > skeptical of anyone recommending products they sell. I bet you don't
> > sell KB blowers hence the weighting of your original response toward
> > blowers you probably do sell and can make a profit from. Maybe I'm
> > being cynical but then again maybe I'm not.
> >
> > FastAutoSports wrote:
> > > Actually we sell any supercharger, turbo or twin turbo that is made
> > > for 'stangs. If its not on our site, it won't suprise me as we have
> > > over 600 manufacturers that we deal with so ...... there just isnt
> > > enough hours in the day to get them all on there. I am, along with
> > > the wife, also the contract writer, webmaster, sales associate, order
> > > taker, CFO, inventory/stock, etc, etc. During the day I am an aviation
> > > electro-mechanical engineer in the United States Navy defending your
> > > freedoms and protecting our great nation from whomever our politicians
> > > say the enemy is.
> > >
> > > KB -- Never heard anything bad either.
> > >
> > > Paxton -- Nothing but good things.
> > >
> > > Eaton -- Kinda high, easy to rebuild lol OEM
> > >
> > > Powerdyne -- Alas less expensive, but have yet to hear any of my
> > > customers complain about belt issues, so I can't speak on that
> > > matter.
> > >
> > > Vortech -- My personal choice. Great product.
> > >
> > > Last comment -- Personal preference divided by deep pockets!
> > >
> > > -Tom
> > >
> > > http://www.fastmustangparts.com/
> > >
> > >
> > >
> > >
> > > > wrote in message
> .com>...
> > >
> > >>I haven't installed a blower on my car, but I hafta agree.. I've heard
> > >>nothing but good things about Kenne Bell & doing my own research &
> speaking
> > >>with some representatives there... they seem to know what they are
> doing. A
> > >>local 02 GT has a KB blown Mustang... blue.. beautiful car & runs like a
> > >>BEAST!! Extremely torquey & gobs of HP at the top-end. I am thoroughly
> > >>impressed. I've heard good things about Vortech as well, but as Michael
> > >>pointed out... add in everything & you'll be right under or at the cost
> of a
> > >>KB... but you don't get the torque of a KB twin-screw blower from any
> > >>centrifugal blower .
> > >>
> > >>-Mike
> > >>
> > >>--
> > >>A happy kid behind the wheel of a 98 Mustang GT
> > >>Cold air intake
> > >>FRPP 3.73 gears
> > >>Steeda Tri-Ax Shifter
> > >>Full Boar turbo mufflers
> > >>Hi-speed fan switch
> > >>255/60R-15 rear tires
> > >>Subframe connectors
> > >>
> > >>
> > >>"Michael Johnson, PE" > wrote in message
> > ...
> > >>
> > >>>Powerdyne is a poor recommendation. They brake belts and need more
> > >>>service than just about any blower currently sold. The KB blower for
> > >>>the '99+ GT's make more hp/psi of boost on a bone stock engine than
> > >>>Paxton or Powerdyne. As for bang for the buck, by the time you add all
> > >>>the items (fuel injectors, chip, etc.) KB includes in their kits the
> > >>>centrifugal blowers will cost just as much. Something tells me that
> you
> > >>>don't sell KB blowers over at fastmustangparts.
> > >>>
> > >>>FastAutoSports wrote:
> > >>>
> > >>>>GT,
> > >>>>
> > >>>>Powerdyne and Paxton Superchargers will give you and your Ford Mustang
> > >>>>the most bang for the buck. Both are comparable or better than the
> > >>>>Kenne Bell, especially if you want to push 8psi. All three have very
> > >>>>strong reputations, so it comes down to personal preferences and how
> > >>>>deep your pockets are.
> > >>>>
> > >>>>Have a good one and Good Luck.
> > >>>>
> > >>>>-Tom
> > >>>>
> > >>>>Fast Auto Sports
> > >>>>
> > >>>>http://www.fastmustangparts.com/
> >
> > >>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>>"Recon_" > wrote in message
> > >>
> > >> link.net>...
> > >>
> > >>>>>Hi All,
> > >>>>>
> > >>>>> I have an 04 40th Anniversary GT Vert and have been looking into
> > >>>>>supercharger kits. I'm leaning towards a Kenne Bell intercooled
> > >>>>>@ 8psi from what Ive researched, but wanted to get input from some
> > >>>>>people who have installed one.
> > >>>>>
> > >>>>> Any opinions or tips would be much appreciated.
> > >>>>>
> > >>>>>thanks,
> > >>>>>
> > >>>>>GT

If you don't know what works well and what doesn't then you shouldn't
post like you are an authority. If I don't know the topic in question
then I don't reply or I qualify my answer. Otherwise, I'll read and
keep quite because I might learn something. You're finding that we just
don't take well to vendors making recommendations for parts they sell
from a for profit business. It's the equivalent of the fox guarding the
hen house.

Having just admitted that you don't know it all, and hence the lack of
knowledge on Powerdyne blower problems, just reinforces our position to
not trust vendors who use this group to mine for customers.

BTW, what's your price for a KB kit for a '99-'04 GT and how many of
those kits have you sold? Are you an authorized retailer with Kenne Bell?

FastAutoSports wrote:
> People People People,
>
> One, I don't need to go "mining". My customers and dealers do a great
> job. Two, I will admit that I am not a "know it all" Sorry. But I
> never said I was. When you deal with over 600 manufacturers, its kinda
> hard to know EVERYTHING about EVERY product they make. And if someone
> says they do, well I guess they are a "know it all". But since I am
> only 31 years old, I can't possibly know everything, YET But my
> ego does tell me I know quite a bit about alot of things.
>
> My comments about Powerdyne were based SOLELY on my experiences with
> my customers. None of those 300-something people have had any
> problems. Future problems?, maybe they will, maybe they won't. Hell,
> I bet I can have a comment on just about anything, just like you.
>
> If I was smarter, (like I said, I am not a "know it all"), I would
> have recommended ATI or Vortech, because it makes more "business
> sense" for me
>
> Have had an Eaton or two come back, but things brake, all
> manufacturers have QA departments, so obviously none of them are
> perfect. Funny, but those two also bought a KB at a later time. So
> maybe they share your opinions.
>
> So yes you are probably being cynical, but thats ok, that's why I
> serve our country everyday, so you and others can be.
>
> The gentleman asked for some opinions and recommendations, and I gave
> mine, based on my customers feedback and experience.
>
> Others have gave thier opinions and I have not "jumped" on them like
> flies on, well you know...............
>
> Like I said, PERSONAL PREFERENCE AND DEEP POCKETS!!!
>
> Oh BTW, send me a KB part # and I will send a price.
>
> Have a good evening.
>
> -Tom
>
>
> > wrote in message .com>...
>
>>Seconded.
>>
>>-Mike
>>
>>--
>>A happy kid behind the wheel of a 98 Mustang GT
>>Cold air intake
>>FRPP 3.73 gears
>>Steeda Tri-Ax Shifter
>>Full Boar turbo mufflers
>>Hi-speed fan switch
>>255/60R-15 rear tires
>>Subframe connectors
>>
>>
>>"Michael Johnson, PE" > wrote in message
...
>>
>>>This was a nice "politically correct" response from someone trying to
>>>mine for potential new customers. The fact you don't know about the
>>>well known and long standing issues with Powerdyne blowers makes me
>>>wonder how much you actually know about superchargers in general. We're
>>>a fairly tight knit group here and we try to share knowledge with each
>>>other to keep someone from making a bad decision. I, for one, am always
>>>skeptical of anyone recommending products they sell. I bet you don't
>>>sell KB blowers hence the weighting of your original response toward
>>>blowers you probably do sell and can make a profit from. Maybe I'm
>>>being cynical but then again maybe I'm not.
>>>
>>>FastAutoSports wrote:
>>>
>>>>Actually we sell any supercharger, turbo or twin turbo that is made
>>>>for 'stangs. If its not on our site, it won't suprise me as we have
>>>>over 600 manufacturers that we deal with so ...... there just isnt
>>>>enough hours in the day to get them all on there. I am, along with
>>>>the wife, also the contract writer, webmaster, sales associate, order
>>>>taker, CFO, inventory/stock, etc, etc. During the day I am an aviation
>>>>electro-mechanical engineer in the United States Navy defending your
>>>>freedoms and protecting our great nation from whomever our politicians
>>>>say the enemy is.
>>>>
>>>>KB -- Never heard anything bad either.
>>>>
>>>>Paxton -- Nothing but good things.
>>>>
>>>>Eaton -- Kinda high, easy to rebuild lol OEM
>>>>
>>>>Powerdyne -- Alas less expensive, but have yet to hear any of my
>>>>customers complain about belt issues, so I can't speak on that
>>>>matter.
>>>>
>>>>Vortech -- My personal choice. Great product.
>>>>
>>>>Last comment -- Personal preference divided by deep pockets!
>>>>
>>>>-Tom
>>>>
>>>>http://www.fastmustangparts.com/

>>>>
>>>>
>>>>
> wrote in message
>>
>> .com>...
>>
>>>>>I haven't installed a blower on my car, but I hafta agree.. I've heard
>>>>>nothing but good things about Kenne Bell & doing my own research &
>>
>> speaking
>>
>>>>>with some representatives there... they seem to know what they are
>>
>> doing. A
>>
>>>>>local 02 GT has a KB blown Mustang... blue.. beautiful car & runs like a
>>>>>BEAST!! Extremely torquey & gobs of HP at the top-end. I am thoroughly
>>>>>impressed. I've heard good things about Vortech as well, but as Michael
>>>>>pointed out... add in everything & you'll be right under or at the cost
>>
>> of a
>>
>>>>>KB... but you don't get the torque of a KB twin-screw blower from any
>>>>>centrifugal blower .
>>>>>
>>>>>-Mike
>>>>>
>>>>>--
>>>>>A happy kid behind the wheel of a 98 Mustang GT
>>>>>Cold air intake
>>>>>FRPP 3.73 gears
>>>>>Steeda Tri-Ax Shifter
>>>>>Full Boar turbo mufflers
>>>>>Hi-speed fan switch
>>>>>255/60R-15 rear tires
>>>>>Subframe connectors
>>>>>
>>>>>
>>>>>"Michael Johnson, PE" > wrote in message
...
>>>>>
>>>>>
>>>>>>Powerdyne is a poor recommendation. They brake belts and need more
>>>>>>service than just about any blower currently sold. The KB blower for
>>>>>>the '99+ GT's make more hp/psi of boost on a bone stock engine than
>>>>>>Paxton or Powerdyne. As for bang for the buck, by the time you add all
>>>>>>the items (fuel injectors, chip, etc.) KB includes in their kits the
>>>>>>centrifugal blowers will cost just as much. Something tells me that
>>
>> you
>>
>>>>>>don't sell KB blowers over at fastmustangparts.
>>>>>>
>>>>>>FastAutoSports wrote:
>>>>>>
>>>>>>
>>>>>>>GT,
>>>>>>>
>>>>>>>Powerdyne and Paxton Superchargers will give you and your Ford Mustang
>>>>>>>the most bang for the buck. Both are comparable or better than the
>>>>>>>Kenne Bell, especially if you want to push 8psi. All three have very
>>>>>>>strong reputations, so it comes down to personal preferences and how
>>>>>>>deep your pockets are.
>>>>>>>
>>>>>>>Have a good one and Good Luck.
>>>>>>>
>>>>>>>-Tom
>>>>>>>
>>>>>>>Fast Auto Sports
>>>>>>>
>>>>>>>http://www.fastmustangparts.com/

>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>"Recon_" > wrote in message
>>>>>
. earthlink.net>...
>>>>>
>>>>>
>>>>>>>>Hi All,
>>>>>>>>
>>>>>>>> I have an 04 40th Anniversary GT Vert and have been looking into
>>>>>>>>supercharger kits. I'm leaning towards a Kenne Bell intercooled
>>>>>>>>@ 8psi from what Ive researched, but wanted to get input from some
>>>>>>>>people who have installed one.
>>>>>>>>
>>>>>>>> Any opinions or tips would be much appreciated.
>>>>>>>>
>>>>>>>>thanks,
>>>>>>>>
>>>>>>>>GT

Waiting for Kate's input here. ;-)

JohnV@nn

"FastAutoSports" > wrote in message om...
> People People People,
>
> One, I don't need to go "mining". My customers and dealers do a great
> job. Two, I will admit that I am not a "know it all" Sorry. But I
> never said I was. When you deal with over 600 manufacturers, its kinda
> hard to know EVERYTHING about EVERY product they make. And if someone
> says they do, well I guess they are a "know it all". But since I am
> only 31 years old, I can't possibly know everything, YET But my
> ego does tell me I know quite a bit about alot of things.
>
> My comments about Powerdyne were based SOLELY on my experiences with
> my customers. None of those 300-something people have had any
> problems. Future problems?, maybe they will, maybe they won't. Hell,
> I bet I can have a comment on just about anything, just like you.
>
> If I was smarter, (like I said, I am not a "know it all"), I would
> have recommended ATI or Vortech, because it makes more "business
> sense" for me
>
> Have had an Eaton or two come back, but things brake, all
> manufacturers have QA departments, so obviously none of them are
> perfect. Funny, but those two also bought a KB at a later time. So
> maybe they share your opinions.
>
> So yes you are probably being cynical, but thats ok, that's why I
> serve our country everyday, so you and others can be.
>
> The gentleman asked for some opinions and recommendations, and I gave
> mine, based on my customers feedback and experience.
>
> Others have gave thier opinions and I have not "jumped" on them like
> flies on, well you know...............
>
> Like I said, PERSONAL PREFERENCE AND DEEP POCKETS!!!
>
> Oh BTW, send me a KB part # and I will send a price.
>
> Have a good evening.
>
> -Tom

LMAO, are we like in High School or something. I did what I did
because I was requested. And NO I am not going to play your childish
games and give you names and phone numbers LOL I mean, are you a WD
or something? Want references? LOL come one man! LOL. So no, I don't
think so. I am not going to do something unlawful nor unethical to
satify your need for importance.

I respect this group's Charter. Rules are rules and I have followed
them since they were brought to my attention. Of course, not by you.
By an ethical member and enthusiast.

Like I said, lets go to Australia, if you can get off that computer
long enough, since you obviously want a ****ing contest, but still
have not figured out what it is.

Oh one more thing. There is NOT one person who is an expert on over
600 Manufacturer lines. Not even me. I am just man enough to admit it.
I never said I couldn't find out. If I can keep our country's
high-tech 10's of millions of dollar Jets flying with thier miles of
wiring, HP measured in thousands of pounds of thrust, Mach 2 speed,
well I am sure I can find a part number and get reliability statistics
for whatever is manufactured.

Everyone has thier favorite products. Do you know what mine are?
WHATEVER sells, because I am here to provide a service to the
enthusiast. What they want, is what I can get. Most enthusiasts are
thier own experts, do thier own research, they know what they want for
thier vehicles. I just make it happen.

Have a good evening, and please don't stay on the computer all the
time. Its not good for your wrists, eyesite and computers along with
their monitors emits a small amount of radiation. Hopefully you have
a flatscreen, cuts back on the radiation alittle.

Have a good evening.

Your ****ing Contest Buddy.

-Tom

PS Whenever you feel that you have graduated from High School, we
could get off this dead horse.



"Michael Johnson, PE" > wrote in message >...
> If you don't know what works well and what doesn't then you shouldn't
> post like you are an authority. If I don't know the topic in question
> then I don't reply or I qualify my answer. Otherwise, I'll read and
> keep quite because I might learn something. You're finding that we just
> don't take well to vendors making recommendations for parts they sell
> from a for profit business. It's the equivalent of the fox guarding the
> hen house.
>
> Having just admitted that you don't know it all, and hence the lack of
> knowledge on Powerdyne blower problems, just reinforces our position to
> not trust vendors who use this group to mine for customers.
>
> BTW, what's your price for a KB kit for a '99-'04 GT and how many of
> those kits have you sold? Are you an authorized retailer with Kenne Bell?
>
> FastAutoSports wrote:
> > People People People,
> >
> > One, I don't need to go "mining". My customers and dealers do a great
> > job. Two, I will admit that I am not a "know it all" Sorry. But I
> > never said I was. When you deal with over 600 manufacturers, its kinda
> > hard to know EVERYTHING about EVERY product they make. And if someone
> > says they do, well I guess they are a "know it all". But since I am
> > only 31 years old, I can't possibly know everything, YET But my
> > ego does tell me I know quite a bit about alot of things.
> >
> > My comments about Powerdyne were based SOLELY on my experiences with
> > my customers. None of those 300-something people have had any
> > problems. Future problems?, maybe they will, maybe they won't. Hell,
> > I bet I can have a comment on just about anything, just like you.
> >
> > If I was smarter, (like I said, I am not a "know it all"), I would
> > have recommended ATI or Vortech, because it makes more "business
> > sense" for me
> >
> > Have had an Eaton or two come back, but things brake, all
> > manufacturers have QA departments, so obviously none of them are
> > perfect. Funny, but those two also bought a KB at a later time. So
> > maybe they share your opinions.
> >
> > So yes you are probably being cynical, but thats ok, that's why I
> > serve our country everyday, so you and others can be.
> >
> > The gentleman asked for some opinions and recommendations, and I gave
> > mine, based on my customers feedback and experience.
> >
> > Others have gave thier opinions and I have not "jumped" on them like
> > flies on, well you know...............
> >
> > Like I said, PERSONAL PREFERENCE AND DEEP POCKETS!!!
> >
> > Oh BTW, send me a KB part # and I will send a price.
> >
> > Have a good evening.
> >
> > -Tom
> >
> >
> > > wrote in message .com>...
> >
> >>Seconded.
> >>
> >>-Mike
> >>
> >>--
> >>A happy kid behind the wheel of a 98 Mustang GT
> >>Cold air intake
> >>FRPP 3.73 gears
> >>Steeda Tri-Ax Shifter
> >>Full Boar turbo mufflers
> >>Hi-speed fan switch
> >>255/60R-15 rear tires
> >>Subframe connectors
> >>
> >>
> >>"Michael Johnson, PE" > wrote in message
> ...
> >>
> >>>This was a nice "politically correct" response from someone trying to
> >>>mine for potential new customers. The fact you don't know about the
> >>>well known and long standing issues with Powerdyne blowers makes me
> >>>wonder how much you actually know about superchargers in general. We're
> >>>a fairly tight knit group here and we try to share knowledge with each
> >>>other to keep someone from making a bad decision. I, for one, am always
> >>>skeptical of anyone recommending products they sell. I bet you don't
> >>>sell KB blowers hence the weighting of your original response toward
> >>>blowers you probably do sell and can make a profit from. Maybe I'm
> >>>being cynical but then again maybe I'm not.
> >>>
> >>>FastAutoSports wrote:
> >>>
> >>>>Actually we sell any supercharger, turbo or twin turbo that is made
> >>>>for 'stangs. If its not on our site, it won't suprise me as we have
> >>>>over 600 manufacturers that we deal with so ...... there just isnt
> >>>>enough hours in the day to get them all on there. I am, along with
> >>>>the wife, also the contract writer, webmaster, sales associate, order
> >>>>taker, CFO, inventory/stock, etc, etc. During the day I am an aviation
> >>>>electro-mechanical engineer in the United States Navy defending your
> >>>>freedoms and protecting our great nation from whomever our politicians
> >>>>say the enemy is.
> >>>>
> >>>>KB -- Never heard anything bad either.
> >>>>
> >>>>Paxton -- Nothing but good things.
> >>>>
> >>>>Eaton -- Kinda high, easy to rebuild lol OEM
> >>>>
> >>>>Powerdyne -- Alas less expensive, but have yet to hear any of my
> >>>>customers complain about belt issues, so I can't speak on that
> >>>>matter.
> >>>>
> >>>>Vortech -- My personal choice. Great product.
> >>>>
> >>>>Last comment -- Personal preference divided by deep pockets!
> >>>>
> >>>>-Tom
> >>>>
> >>>>http://www.fastmustangparts.com/
>
> >>>>
> >>>>
> >>>>
> > wrote in message
> >>
> >> .com>...
> >>
> >>>>>I haven't installed a blower on my car, but I hafta agree.. I've heard
> >>>>>nothing but good things about Kenne Bell & doing my own research &
> >>
> >> speaking
> >>
> >>>>>with some representatives there... they seem to know what they are
> >>
> >> doing. A
> >>
> >>>>>local 02 GT has a KB blown Mustang... blue.. beautiful car & runs like a
> >>>>>BEAST!! Extremely torquey & gobs of HP at the top-end. I am thoroughly
> >>>>>impressed. I've heard good things about Vortech as well, but as Michael
> >>>>>pointed out... add in everything & you'll be right under or at the cost
> >>
> >> of a
> >>
> >>>>>KB... but you don't get the torque of a KB twin-screw blower from any
> >>>>>centrifugal blower .
> >>>>>
> >>>>>-Mike
> >>>>>
> >>>>>--
> >>>>>A happy kid behind the wheel of a 98 Mustang GT
> >>>>>Cold air intake
> >>>>>FRPP 3.73 gears
> >>>>>Steeda Tri-Ax Shifter
> >>>>>Full Boar turbo mufflers
> >>>>>Hi-speed fan switch
> >>>>>255/60R-15 rear tires
> >>>>>Subframe connectors
> >>>>>
> >>>>>
> >>>>>"Michael Johnson, PE" > wrote in message
> ...
> >>>>>
> >>>>>
> >>>>>>Powerdyne is a poor recommendation. They brake belts and need more
> >>>>>>service than just about any blower currently sold. The KB blower for
> >>>>>>the '99+ GT's make more hp/psi of boost on a bone stock engine than
> >>>>>>Paxton or Powerdyne. As for bang for the buck, by the time you add all
> >>>>>>the items (fuel injectors, chip, etc.) KB includes in their kits the
> >>>>>>centrifugal blowers will cost just as much. Something tells me that
> >>
> >> you
> >>
> >>>>>>don't sell KB blowers over at fastmustangparts.
> >>>>>>
> >>>>>>FastAutoSports wrote:
> >>>>>>
> >>>>>>
> >>>>>>>GT,
> >>>>>>>
> >>>>>>>Powerdyne and Paxton Superchargers will give you and your Ford Mustang
> >>>>>>>the most bang for the buck. Both are comparable or better than the
> >>>>>>>Kenne Bell, especially if you want to push 8psi. All three have very
> >>>>>>>strong reputations, so it comes down to personal preferences and how
> >>>>>>>deep your pockets are.
> >>>>>>>
> >>>>>>>Have a good one and Good Luck.
> >>>>>>>
> >>>>>>>-Tom
> >>>>>>>
> >>>>>>>Fast Auto Sports
> >>>>>>>
> >>>>>>>http://www.fastmustangparts.com/
>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>"Recon_" > wrote in message
> >>>>>
> . earthlink.net>...
> >>>>>
> >>>>>
> >>>>>>>>Hi All,
> >>>>>>>>
> >>>>>>>> I have an 04 40th Anniversary GT Vert and have been looking into
> >>>>>>>>supercharger kits. I'm leaning towards a Kenne Bell intercooled
> >>>>>>>>@ 8psi from what Ive researched, but wanted to get input from some
> >>>>>>>>people who have installed one.
> >>>>>>>>
> >>>>>>>> Any opinions or tips would be much appreciated.
> >>>>>>>>
> >>>>>>>>thanks,
> >>>>>>>>
> >>>>>>>>GT

Yep... it just became official.. I will forever REFUSE to order from you
now. You TOO are acting like a little child, talking like we should blow you
because you are "protecting us". Tons of people are, but they aren't
expecting something for it. I appreciate every last person who serves this
country, but I RESPECT the ones who don't expect something in return.

Everyone has their favorite products... yours are whatever sells? So what if
the product is complete crap? Sell it anyway? Of course you would b/c you
don't give a rat's ass about the customer (obviously since you recommended
Powerdyne blowers even after hearing about their problematic tendencies)
just how fat your wallet gets.

Since when did Michael ask you for a phone number? Or any other personal
information? I believe simple nicknames would have sufficed. But you refused
because nobody DID ask you to come here... this made incredibly apparent by
your childish rants & refusal to list a single person.

Isn't it past your bed time?

-Mike

--
A happy kid behind the wheel of a 98 Mustang GT
Cold air intake
FRPP 3.73 gears
Steeda Tri-Ax Shifter
Flowmaster 40 Series mufflers (self-installed woohoo)
Hi-speed fan switch
255/60R-15 rear tires
Subframe connectors


"FastAutoSports" > wrote in message
om...
> LMAO, are we like in High School or something. I did what I did
> because I was requested. And NO I am not going to play your childish
> games and give you names and phone numbers LOL I mean, are you a WD
> or something? Want references? LOL come one man! LOL. So no, I don't
> think so. I am not going to do something unlawful nor unethical to
> satify your need for importance.
>
> I respect this group's Charter. Rules are rules and I have followed
> them since they were brought to my attention. Of course, not by you.
> By an ethical member and enthusiast.
>
> Like I said, lets go to Australia, if you can get off that computer
> long enough, since you obviously want a ****ing contest, but still
> have not figured out what it is.
>
> Oh one more thing. There is NOT one person who is an expert on over
> 600 Manufacturer lines. Not even me. I am just man enough to admit it.
> I never said I couldn't find out. If I can keep our country's
> high-tech 10's of millions of dollar Jets flying with thier miles of
> wiring, HP measured in thousands of pounds of thrust, Mach 2 speed,
> well I am sure I can find a part number and get reliability statistics
> for whatever is manufactured.
>
> Everyone has thier favorite products. Do you know what mine are?
> WHATEVER sells, because I am here to provide a service to the
> enthusiast. What they want, is what I can get. Most enthusiasts are
> thier own experts, do thier own research, they know what they want for
> thier vehicles. I just make it happen.
>
> Have a good evening, and please don't stay on the computer all the
> time. Its not good for your wrists, eyesite and computers along with
> their monitors emits a small amount of radiation. Hopefully you have
> a flatscreen, cuts back on the radiation alittle.
>
> Have a good evening.
>
> Your ****ing Contest Buddy.
>
> -Tom
>
> PS Whenever you feel that you have graduated from High School, we
> could get off this dead horse.
>
>
>
> "Michael Johnson, PE" > wrote in message
>...
> > If you don't know what works well and what doesn't then you shouldn't
> > post like you are an authority. If I don't know the topic in question
> > then I don't reply or I qualify my answer. Otherwise, I'll read and
> > keep quite because I might learn something. You're finding that we just
> > don't take well to vendors making recommendations for parts they sell
> > from a for profit business. It's the equivalent of the fox guarding the
> > hen house.
> >
> > Having just admitted that you don't know it all, and hence the lack of
> > knowledge on Powerdyne blower problems, just reinforces our position to
> > not trust vendors who use this group to mine for customers.
> >
> > BTW, what's your price for a KB kit for a '99-'04 GT and how many of
> > those kits have you sold? Are you an authorized retailer with Kenne
Bell?
> >
> > FastAutoSports wrote:
> > > People People People,
> > >
> > > One, I don't need to go "mining". My customers and dealers do a great
> > > job. Two, I will admit that I am not a "know it all" Sorry. But I
> > > never said I was. When you deal with over 600 manufacturers, its kinda
> > > hard to know EVERYTHING about EVERY product they make. And if someone
> > > says they do, well I guess they are a "know it all". But since I am
> > > only 31 years old, I can't possibly know everything, YET But my
> > > ego does tell me I know quite a bit about alot of things.
> > >
> > > My comments about Powerdyne were based SOLELY on my experiences with
> > > my customers. None of those 300-something people have had any
> > > problems. Future problems?, maybe they will, maybe they won't. Hell,
> > > I bet I can have a comment on just about anything, just like you.
> > >
> > > If I was smarter, (like I said, I am not a "know it all"), I would
> > > have recommended ATI or Vortech, because it makes more "business
> > > sense" for me
> > >
> > > Have had an Eaton or two come back, but things brake, all
> > > manufacturers have QA departments, so obviously none of them are
> > > perfect. Funny, but those two also bought a KB at a later time. So
> > > maybe they share your opinions.
> > >
> > > So yes you are probably being cynical, but thats ok, that's why I
> > > serve our country everyday, so you and others can be.
> > >
> > > The gentleman asked for some opinions and recommendations, and I gave
> > > mine, based on my customers feedback and experience.
> > >
> > > Others have gave thier opinions and I have not "jumped" on them like
> > > flies on, well you know...............
> > >
> > > Like I said, PERSONAL PREFERENCE AND DEEP POCKETS!!!
> > >
> > > Oh BTW, send me a KB part # and I will send a price.
> > >
> > > Have a good evening.
> > >
> > > -Tom
> > >
> > >
> > > > wrote in message
.com>...
> > >
> > >>Seconded.
> > >>
> > >>-Mike
> > >>
> > >>--
> > >>A happy kid behind the wheel of a 98 Mustang GT
> > >>Cold air intake
> > >>FRPP 3.73 gears
> > >>Steeda Tri-Ax Shifter
> > >>Full Boar turbo mufflers
> > >>Hi-speed fan switch
> > >>255/60R-15 rear tires
> > >>Subframe connectors
> > >>
> > >>
> > >>"Michael Johnson, PE" > wrote in message
> > ...
> > >>
> > >>>This was a nice "politically correct" response from someone trying to
> > >>>mine for potential new customers. The fact you don't know about the
> > >>>well known and long standing issues with Powerdyne blowers makes me
> > >>>wonder how much you actually know about superchargers in general.
We're
> > >>>a fairly tight knit group here and we try to share knowledge with
each
> > >>>other to keep someone from making a bad decision. I, for one, am
always
> > >>>skeptical of anyone recommending products they sell. I bet you don't
> > >>>sell KB blowers hence the weighting of your original response toward
> > >>>blowers you probably do sell and can make a profit from. Maybe I'm
> > >>>being cynical but then again maybe I'm not.
> > >>>
> > >>>FastAutoSports wrote:
> > >>>
> > >>>>Actually we sell any supercharger, turbo or twin turbo that is made
> > >>>>for 'stangs. If its not on our site, it won't suprise me as we have
> > >>>>over 600 manufacturers that we deal with so ...... there just isnt
> > >>>>enough hours in the day to get them all on there. I am, along with
> > >>>>the wife, also the contract writer, webmaster, sales associate,
order
> > >>>>taker, CFO, inventory/stock, etc, etc. During the day I am an
aviation
> > >>>>electro-mechanical engineer in the United States Navy defending your
> > >>>>freedoms and protecting our great nation from whomever our
politicians
> > >>>>say the enemy is.
> > >>>>
> > >>>>KB -- Never heard anything bad either.
> > >>>>
> > >>>>Paxton -- Nothing but good things.
> > >>>>
> > >>>>Eaton -- Kinda high, easy to rebuild lol OEM
> > >>>>
> > >>>>Powerdyne -- Alas less expensive, but have yet to hear any of my
> > >>>>customers complain about belt issues, so I can't speak on that
> > >>>>matter.
> > >>>>
> > >>>>Vortech -- My personal choice. Great product.
> > >>>>
> > >>>>Last comment -- Personal preference divided by deep pockets!
> > >>>>
> > >>>>-Tom
> > >>>>
> > >>>>http://www.fastmustangparts.com/
> >
> > >>>>
> > >>>>
> > >>>>
> > > wrote in message
> > >>
> > >> .com>...
> > >>
> > >>>>>I haven't installed a blower on my car, but I hafta agree.. I've
heard
> > >>>>>nothing but good things about Kenne Bell & doing my own research &
> > >>
> > >> speaking
> > >>
> > >>>>>with some representatives there... they seem to know what they are
> > >>
> > >> doing. A
> > >>
> > >>>>>local 02 GT has a KB blown Mustang... blue.. beautiful car & runs
like a
> > >>>>>BEAST!! Extremely torquey & gobs of HP at the top-end. I am
thoroughly
> > >>>>>impressed. I've heard good things about Vortech as well, but as
Michael
> > >>>>>pointed out... add in everything & you'll be right under or at the
cost
> > >>
> > >> of a
> > >>
> > >>>>>KB... but you don't get the torque of a KB twin-screw blower from
any
> > >>>>>centrifugal blower .
> > >>>>>
> > >>>>>-Mike
> > >>>>>
> > >>>>>--
> > >>>>>A happy kid behind the wheel of a 98 Mustang GT
> > >>>>>Cold air intake
> > >>>>>FRPP 3.73 gears
> > >>>>>Steeda Tri-Ax Shifter
> > >>>>>Full Boar turbo mufflers
> > >>>>>Hi-speed fan switch
> > >>>>>255/60R-15 rear tires
> > >>>>>Subframe connectors
> > >>>>>
> > >>>>>
> > >>>>>"Michael Johnson, PE" > wrote in message
> > ...
> > >>>>>
> > >>>>>
> > >>>>>>Powerdyne is a poor recommendation. They brake belts and need
more
> > >>>>>>service than just about any blower currently sold. The KB blower
for
> > >>>>>>the '99+ GT's make more hp/psi of boost on a bone stock engine
than
> > >>>>>>Paxton or Powerdyne. As for bang for the buck, by the time you
add all
> > >>>>>>the items (fuel injectors, chip, etc.) KB includes in their kits
the
> > >>>>>>centrifugal blowers will cost just as much. Something tells me
that
> > >>
> > >> you
> > >>
> > >>>>>>don't sell KB blowers over at fastmustangparts.
> > >>>>>>
> > >>>>>>FastAutoSports wrote:
> > >>>>>>
> > >>>>>>
> > >>>>>>>GT,
> > >>>>>>>
> > >>>>>>>Powerdyne and Paxton Superchargers will give you and your Ford
Mustang
> > >>>>>>>the most bang for the buck. Both are comparable or better than
the
> > >>>>>>>Kenne Bell, especially if you want to push 8psi. All three have
very
> > >>>>>>>strong reputations, so it comes down to personal preferences and
how
> > >>>>>>>deep your pockets are.
> > >>>>>>>
> > >>>>>>>Have a good one and Good Luck.
> > >>>>>>>
> > >>>>>>>-Tom
> > >>>>>>>
> > >>>>>>>Fast Auto Sports
> > >>>>>>>
> > >>>>>>>http://www.fastmustangparts.com/
> >
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>"Recon_" > wrote in message
> > >>>>>
> > . earthlink.net>...
> > >>>>>
> > >>>>>
> > >>>>>>>>Hi All,
> > >>>>>>>>
> > >>>>>>>> I have an 04 40th Anniversary GT Vert and have been looking
into
> > >>>>>>>>supercharger kits. I'm leaning towards a Kenne Bell intercooled
> > >>>>>>>>@ 8psi from what Ive researched, but wanted to get input from
some
> > >>>>>>>>people who have installed one.
> > >>>>>>>>
> > >>>>>>>> Any opinions or tips would be much appreciated.
> > >>>>>>>>
> > >>>>>>>>thanks,
> > >>>>>>>>
> > >>>>>>>>GT