If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
TJ Castle-Nut Size for Upper and Lower Ball Joint on Front Steering Knuckle
TJ Castle-Nut Size for Upper and Lower Ball Joint on Front Steering
Knuckle...Anyone know what it is? I need to get a socket on the way home at lunch and finish taking my steering knuckle off.. Thanks! |
Ads |
#2
|
|||
|
|||
TJ Castle-Nut Size for Upper and Lower Ball Joint on Front Steering Knuckle
1 5/16":
http://members.cox.net/rough-riders/...30/dana30.html God Bless America, Bill 0|||||||0 http://www.billhughes.com/ "Dave" > wrote in message oups.com... > TJ Castle-Nut Size for Upper and Lower Ball Joint on Front Steering > Knuckle...Anyone know what it is? I need to get a socket on the way > home at lunch and finish taking my steering knuckle off.. > > Thanks! > -- Posted via a free Usenet account from http://www.teranews.com |
#3
|
|||
|
|||
TJ Castle-Nut Size for Upper and Lower Ball Joint on Front Steering Knuckle
By 1 5/16" do you mean "Not sure" ?
The link you provided was for an 83 CJ, and apparently the nut sizes have gotten smaller through the years.. It turns out the upper nut is 7/8" and the bottom looks to be something like a 29mm or Standard equivalent? I have to go buy one today. Thanks anyway. On Feb 14, 4:28 pm, "L.W. \(Bill\) Hughes III" > wrote: > 1 5/16":http://members.cox.net/rough-riders/...30/dana30.html > God Bless America, Bill 0|||||||0 > / > > "Dave" > wrote in message > > oups.com... > > > TJ Castle-Nut Size for Upper and Lower Ball Joint on Front Steering > > Knuckle...Anyone know what it is? I need to get a socket on the way > > home at lunch and finish taking my steering knuckle off.. > > > Thanks! > > -- > Posted via a free Usenet account fromhttp://www.teranews.com |
#4
|
|||
|
|||
TJ Castle-Nut Size for Upper and Lower Ball Joint on Front Steering Knuckle
Please let us know exactly what ones work.
Thanks, Carl "Dave" > wrote in message oups.com... > By 1 5/16" do you mean "Not sure" ? > > The link you provided was for an 83 CJ, and apparently the nut sizes > have gotten smaller through the years.. > > It turns out the upper nut is 7/8" and the bottom looks to be > something like a 29mm or Standard equivalent? I have to go buy one > today. Thanks anyway. > > > > > On Feb 14, 4:28 pm, "L.W. \(Bill\) Hughes III" > > wrote: >> 1 >> 5/16":http://members.cox.net/rough-riders/...30/dana30.html >> God Bless America, Bill 0|||||||0 >> / >> >> "Dave" > wrote in message >> >> oups.com... >> >> > TJ Castle-Nut Size for Upper and Lower Ball Joint on Front Steering >> > Knuckle...Anyone know what it is? I need to get a socket on the way >> > home at lunch and finish taking my steering knuckle off.. >> >> > Thanks! >> >> -- >> Posted via a free Usenet account fromhttp://www.teranews.com > > |
#5
|
|||
|
|||
TJ Castle-Nut Size for Upper and Lower Ball Joint on Front Steering Knuckle
On the upper nut I used a 7/8" and the lower was a 28mm.
... At the time I didn't realize a 22mm is only .009" smaller than a 7/8" and the 7/8" was what I happened to grab first. I imagine that two bolts holding on the same steering knuckle would HAVE to be either both metric or both english, but like I said, I didn't try the 22mm. And, what a PITA, I couldn't find a 28mm socket anywhere, I had to buy a $40 set of larger metric sizes, since on the shelf of individual sockets, it went right from 27mm to 29mm. No 28mm. I apparently need to stop buying craftsman. Thanks, -Dave On Feb 15, 7:18 pm, "Carl S" > wrote: > Please let us know exactly what ones work. > > Thanks, > > Carl > > "Dave" > wrote in message > > oups.com... > > > By 1 5/16" do you mean "Not sure" ? > > > The link you provided was for an 83 CJ, and apparently the nut sizes > > have gotten smaller through the years.. > > > It turns out the upper nut is 7/8" and the bottom looks to be > > something like a 29mm or Standard equivalent? I have to go buy one > > today. Thanks anyway. > > > On Feb 14, 4:28 pm, "L.W. \(Bill\) Hughes III" > > > wrote: > >> 1 > >> 5/16":http://members.cox.net/rough-riders/...30/dana30.html > >> God Bless America, Bill 0|||||||0 > >> / > > >> "Dave" > wrote in message > > groups.com... > > >> > TJ Castle-Nut Size for Upper and Lower Ball Joint on Front Steering > >> > Knuckle...Anyone know what it is? I need to get a socket on the way > >> > home at lunch and finish taking my steering knuckle off.. > > >> > Thanks! > > >> -- > >> Posted via a free Usenet account fromhttp://www.teranews.com |
#6
|
|||
|
|||
TJ Castle-Nut Size for Upper and Lower Ball Joint on Front Steering Knuckle
Dave,
Thanks for letting us know. Carl "Dave" > wrote in message oups.com... > On the upper nut I used a 7/8" and the lower was a 28mm. > > .. At the time I didn't realize a 22mm is only .009" smaller than a > 7/8" and the 7/8" was what I happened to grab first. I imagine that > two bolts holding on the same steering knuckle would HAVE to be either > both metric or both english, but like I said, I didn't try the 22mm. > > And, what a PITA, I couldn't find a 28mm socket anywhere, I had to buy > a $40 set of larger metric sizes, since on the shelf of individual > sockets, it went right from 27mm to 29mm. No 28mm. I apparently need > to stop buying craftsman. > > Thanks, > -Dave > > > On Feb 15, 7:18 pm, "Carl S" > wrote: >> Please let us know exactly what ones work. >> >> Thanks, >> >> Carl >> >> "Dave" > wrote in message >> >> oups.com... >> >> > By 1 5/16" do you mean "Not sure" ? >> >> > The link you provided was for an 83 CJ, and apparently the nut sizes >> > have gotten smaller through the years.. >> >> > It turns out the upper nut is 7/8" and the bottom looks to be >> > something like a 29mm or Standard equivalent? I have to go buy one >> > today. Thanks anyway. >> >> > On Feb 14, 4:28 pm, "L.W. \(Bill\) Hughes III" > >> > wrote: >> >> 1 >> >> 5/16":http://members.cox.net/rough-riders/...30/dana30.html >> >> God Bless America, Bill 0|||||||0 >> >> / >> >> >> "Dave" > wrote in message >> >> groups.com... >> >> >> > TJ Castle-Nut Size for Upper and Lower Ball Joint on Front Steering >> >> > Knuckle...Anyone know what it is? I need to get a socket on the way >> >> > home at lunch and finish taking my steering knuckle off.. >> >> >> > Thanks! >> >> >> -- >> >> Posted via a free Usenet account fromhttp://www.teranews.com > > |
#7
|
|||
|
|||
TJ Castle-Nut Size for Upper and Lower Ball Joint on Front Steering Knuckle
22mm on the upper works fantastic.
On Feb 20, 8:17 pm, "Carl S" > wrote: > Dave, > > Thanks for letting us know. > > Carl > > "Dave" > wrote in message > > oups.com... > > > On the upper nut I used a 7/8" and the lower was a 28mm. > > > .. At the time I didn't realize a 22mm is only .009" smaller than a > > 7/8" and the 7/8" was what I happened to grab first. I imagine that > > two bolts holding on the same steering knuckle would HAVE to be either > > both metric or both english, but like I said, I didn't try the 22mm. > > > And, what a PITA, I couldn't find a 28mm socket anywhere, I had to buy > > a $40 set of larger metric sizes, since on the shelf of individual > > sockets, it went right from 27mm to 29mm. No 28mm. I apparently need > > to stop buying craftsman. > > > Thanks, > > -Dave > > > On Feb 15, 7:18 pm, "Carl S" > wrote: > >> Please let us know exactly what ones work. > > >> Thanks, > > >> Carl > > >> "Dave" > wrote in message > > groups.com... > > >> > By 1 5/16" do you mean "Not sure" ? > > >> > The link you provided was for an 83 CJ, and apparently the nut sizes > >> > have gotten smaller through the years.. > > >> > It turns out the upper nut is 7/8" and the bottom looks to be > >> > something like a 29mm or Standard equivalent? I have to go buy one > >> > today. Thanks anyway. > > >> > On Feb 14, 4:28 pm, "L.W. \(Bill\) Hughes III" > > >> > wrote: > >> >> 1 > >> >> 5/16":http://members.cox.net/rough-riders/...30/dana30.html > >> >> God Bless America, Bill 0|||||||0 > >> >> / > > >> >> "Dave" > wrote in message > > >> groups.com... > > >> >> > TJ Castle-Nut Size for Upper and Lower Ball Joint on Front Steering > >> >> > Knuckle...Anyone know what it is? I need to get a socket on the way > >> >> > home at lunch and finish taking my steering knuckle off.. > > >> >> > Thanks! > > >> >> -- > >> >> Posted via a free Usenet account fromhttp://www.teranews.com |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
914 steering rack in a ball-joint front end | [email protected] | VW air cooled | 0 | June 11th 06 03:07 PM |
ball joint stud / knuckle re-assembly problem | [email protected] | Technology | 6 | February 21st 06 01:02 PM |
99 ford explorer upper ball joint replacement price (driver side front) | V1tte | 4x4 | 0 | July 29th 05 03:31 AM |
How to take ball joint out of Knuckle | [email protected] | Honda | 2 | May 19th 05 07:03 PM |
1998 Explorer Upper Control Arm/ Upper Ball Joint | Silverbirdflyer | Ford Explorer | 2 | January 19th 05 06:19 AM |