RTV gasket or Rubber gasket?

Purchased a transmission filter kit
for my 2006 Dodge caravan 3.3L from NAPA.
Kit has , filter, O ring and rubber
transmission pan gasket. This will be
first filter and fluid change on vehicle.

As I understand it, as the vehicle now
stands the transmission pan gasket does
not have a rubber gasket but Mopar ATF RTV
MS-GF41 ( silicon? )
Will I have any known problems getting
the pan off with this RTV?

The manual tells you to put a 1/8 inch bead
of the above on the Transmission pan when
replacing it. It also says put this RTV under
the bolt heads.
I want to use the rubber pan gasket that came
with the kit.

Is there a preference between a rubber gasket
and RTV?

Thank you in advance
Denny B
Rtv

I've used both with no problems. Personally I'd prefer to use the
gasket becasue when of all the waiting times involved with using RTV
(the time I used it was on a transmission side pan that was vertical,
so I had to let the car drip overnight so that the gasket area would
be clean).

I suspect that the situation where one uses RTV is when can't get a
real gasket.