If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#31
|
|||
|
|||
I bet none of the morons posting here can suggest a good brand of valve seal.
PeterD wrote:
> On Tue, 25 Nov 2008 22:47:33 -0500, "J. Clarke" > > wrote: > >> Jo Baggs wrote: >>> Try Elmer's Glue on your valve seals. That usually works real >>> well. >>> If you need any more useful advice, be sure to ask us again. >>> We're >>> here to help. >> >> Once again irrelevant advice. To what brand of valve seal should I >> apply that Elmer's glue you blithering buffoon? > > MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR > MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR > MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR > MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR > > Ok? Got it? Have they improved them in the past 10 years? >>> "J. Clarke" > wrote in message >>>> Yes, it could be valve seals WHICH IS WHY I ASKED THE DAMNED >>>> QUESTION >>>> IN THE FIRST PLACE YOU RETARDED GET OF A SYPHILITIC JACKASS. >>>> Maybe >>>> the valve guides need to be fixed too, maybe they don't. But if >>>> I >>>> fix the valve guides, I still NEED TO PUT SOME KIND OF DAMN SEAL >>>> ON >>>> and I want to know what brand of seal that should be. >> >> -- -- -- --John to email, dial "usenet" and validate (was jclarke at eye bee em dot net) |
Ads |
#32
|
|||
|
|||
I bet none of the morons posting here can suggest a good brand of valve seal.
"J. Clarke" > wrote in
: > PeterD wrote: >> On Tue, 25 Nov 2008 22:47:33 -0500, "J. Clarke" >> > wrote: >> >>> Jo Baggs wrote: >>>> Try Elmer's Glue on your valve seals. That usually works real >>>> well. >>>> If you need any more useful advice, be sure to ask us again. >>>> We're >>>> here to help. >>> >>> Once again irrelevant advice. To what brand of valve seal should I >>> apply that Elmer's glue you blithering buffoon? >> >> MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR >> MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR >> MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR >> MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR MOPAR >> >> Ok? Got it? > > Have they improved them in the past 10 years? I don't know about that but your act can't get any more stale. HTH! -- Cujo - The Official Overseer of Kooks and Trolls in dfw.*, alt.paranormal, alt.astrology and alt.astrology.metapsych. Supreme Holy Overlord of alt.****nozzles. Winner of the 8/2000, 2/2003 & 4/2007 HL&S award. July 2005 Hammer of Thor. Winning Trainer - Barbara Woodhouse Memorial Dog Whistle - 12/2005 & 4/2008. COOSN-266-06-01895. "If you want to remain judged always guilty by God, just hang onto the OT laws the way that you do." - Georgann on a G*d trip. |
#33
|
|||
|
|||
I bet none of the morons posting here can suggest a good brand of valve seal.
On Mon, 24 Nov 2008 17:40:42 -0500, "J. Clarke"
> wrote: >Well, can you? > >-- Perhaps you should take your Jeep to a Ford or GMC dealer and trade it in for one of their 4x4 vehicles! It seems to me like you are not happy with it, and that will not only please you, but it will also please everybody here. |
#34
|
|||
|
|||
I bet none of the morons posting here can suggest a good brand of valve seal.
Socks wrote:
> On Mon, 24 Nov 2008 17:40:42 -0500, "J. Clarke" > > wrote: > >> Well, can you? >> >> -- > > Perhaps you should take your Jeep to a Ford or GMC dealer and trade > it > in for one of their 4x4 vehicles! > It seems to me like you are not happy with it, and that will not > only > please you, but it will also please everybody here. Yep, another one with nothing to say but still just had to say it. -- -- --John to email, dial "usenet" and validate (was jclarke at eye bee em dot net) |
#35
|
|||
|
|||
I bet none of the morons posting here can suggest a good brandof valve seal.
Just like you! I see you didn't have the guts to mention that you don't
drive a Jeep. J. Clarke wrote: > Socks wrote: >> On Mon, 24 Nov 2008 17:40:42 -0500, "J. Clarke" >> > wrote: >> >>> Well, can you? >>> >>> -- >> Perhaps you should take your Jeep to a Ford or GMC dealer and trade >> it >> in for one of their 4x4 vehicles! >> It seems to me like you are not happy with it, and that will not >> only >> please you, but it will also please everybody here. > > Yep, another one with nothing to say but still just had to say it. > |
#36
|
|||
|
|||
I bet none of the morons posting here can suggest a good brand of valve seal.
RoyJ wrote:
> Just like you! I see you didn't have the guts to mention that you > don't drive a Jeep. Kind of hard to drive it when you have the engine apart. > J. Clarke wrote: >> Socks wrote: >>> On Mon, 24 Nov 2008 17:40:42 -0500, "J. Clarke" >>> > wrote: >>> >>>> Well, can you? >>>> >>>> -- >>> Perhaps you should take your Jeep to a Ford or GMC dealer and >>> trade >>> it >>> in for one of their 4x4 vehicles! >>> It seems to me like you are not happy with it, and that will not >>> only >>> please you, but it will also please everybody here. >> >> Yep, another one with nothing to say but still just had to say it. -- -- --John to email, dial "usenet" and validate (was jclarke at eye bee em dot net) |
#37
|
|||
|
|||
I bet none of the morons posting here can suggest a good brandof valve seal.
You must have done an engine swap since Jeeps don't come with a 5.7
liter engine. J. Clarke wrote: > RoyJ wrote: >> Just like you! I see you didn't have the guts to mention that you >> don't drive a Jeep. > > Kind of hard to drive it when you have the engine apart. > >> J. Clarke wrote: >>> Socks wrote: >>>> On Mon, 24 Nov 2008 17:40:42 -0500, "J. Clarke" >>>> > wrote: >>>> >>>>> Well, can you? >>>>> >>>>> -- >>>> Perhaps you should take your Jeep to a Ford or GMC dealer and >>>> trade >>>> it >>>> in for one of their 4x4 vehicles! >>>> It seems to me like you are not happy with it, and that will not >>>> only >>>> please you, but it will also please everybody here. >>> Yep, another one with nothing to say but still just had to say it. > |
#38
|
|||
|
|||
I bet none of the morons posting here can suggest a good brand of valve seal.
RoyJ wrote:
> You must have done an engine swap since Jeeps don't come with a 5.7 > liter engine. They don't come with Rolls-Royce Merlins either, so what? -- -- --John to email, dial "usenet" and validate (was jclarke at eye bee em dot net) |
#39
|
|||
|
|||
I bet none of the morons posting here can suggest a good brandof valve seal.
So why are pestering a JEEP ng with your silly questions? Obviously a
troll. J. Clarke wrote: > RoyJ wrote: >> You must have done an engine swap since Jeeps don't come with a 5.7 >> liter engine. > > They don't come with Rolls-Royce Merlins either, so what? > > |
#40
|
|||
|
|||
I bet none of the morons posting here can suggest a good brand of valve seal.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Valve seal recommendation? | J. Clarke | Jeep | 4 | November 29th 08 03:41 PM |
Valve guide oil seal question... | Tegger | Technology | 39 | September 18th 07 01:05 AM |
R/R valve seal questions. 93 Saturn | supafly | Technology | 5 | May 24th 06 11:47 PM |
Valve,Butterfly valve,Globe valve,Check valve,Ball valve,Plug valve,Marine valve,Gate valve,Flow control valve | [email protected] | Alfa Romeo | 0 | April 17th 06 08:20 AM |
name brand alternators - what's good? | Nate Nagel | Technology | 6 | January 1st 06 11:21 AM |