Sebring MTC problem

Suddenly my wife's '91 Sebring has a problem with the Manual Temperature
Control.
-Only the high speed blower setting works.
-The vent selection doesn't work.

All fuses are OK.
Nothing else electrical seems in trouble.
My next step seems to pull that part of the panel off.

Ideas welcome.

--
"Spam Hater" > wrote in message
...
> Suddenly my wife's '91 Sebring has a problem with the Manual Temperature
> Control.
> -Only the high speed blower setting works.
> -The vent selection doesn't work.
>
> All fuses are OK.
> Nothing else electrical seems in trouble.
> My next step seems to pull that part of the panel off.
>
> Ideas welcome.

Don't pull the panel off, replace the blower resistor, its located under the
glove box mounted into the A/C Housing.

Glenn Beasley
Chrysler Tech

a 91 sebring????

maxpower wrote:

> --
> "Spam Hater" > wrote in message
> ...
> > Suddenly my wife's '91 Sebring has a problem with the Manual Temperature
> > Control.
> > -Only the high speed blower setting works.
> > -The vent selection doesn't work.
> >
> > All fuses are OK.
> > Nothing else electrical seems in trouble.
> > My next step seems to pull that part of the panel off.
> >
> > Ideas welcome.
>
> Don't pull the panel off, replace the blower resistor, its located under the
> glove box mounted into the A/C Housing.
>
> Glenn Beasley
> Chrysler Tech

> > "Spam Hater" > wrote in message
> > ...
> > > Suddenly my wife's '91 Sebring has a problem with the Manual Temperature
> > > Control.
> > > -Only the high speed blower setting works.
> > > -The vent selection doesn't work.
> > >
> > > All fuses are OK.
> > > Nothing else electrical seems in trouble.
> > > My next step seems to pull that part of the panel off.
> > >
> > > Ideas welcome.
> >
> > Don't pull the panel off, replace the blower resistor, its located under the
> > glove box mounted into the A/C Housing.
> >
> > Glenn Beasley
> > Chrysler Tech

In article >, philthy >
wrote:

> a 91 sebring????
>
> maxpower wrote:
>
> > --

Sorry it's a 2001, the yrs are going too fast! <
Hopefully Glenn's suggestion will do it. Certainly not where I'd have
looked. I'm wondering if I kicked something there when a passenger; the
toe room is a bit cramped for longer legged big foot passengers.
If that's it wife will be extremely happy.

"Spam Hater" > wrote in message
...
> > > "Spam Hater" > wrote in message
> > > ...
> > > > Suddenly my wife's '91 Sebring has a problem with the Manual
Temperature
> > > > Control.
> > > > -Only the high speed blower setting works.
> > > > -The vent selection doesn't work.
> > > >
> > > > All fuses are OK.
> > > > Nothing else electrical seems in trouble.
> > > > My next step seems to pull that part of the panel off.
> > > >
> > > > Ideas welcome.
> > >
> > > Don't pull the panel off, replace the blower resistor, its located
under the
> > > glove box mounted into the A/C Housing.
> > >
> > > Glenn Beasley
> > > Chrysler Tech
>
> In article >, philthy >
> wrote:
>
> > a 91 sebring????
> >
> > maxpower wrote:
> >
> > > --
>
> Sorry it's a 2001, the yrs are going too fast! <
> Hopefully Glenn's suggestion will do it. Certainly not where I'd have
> looked. I'm wondering if I kicked something there when a passenger; the
> toe room is a bit cramped for longer legged big foot passengers.
> If that's it wife will be extremely happy.

I knew what you meant, they didn't make a Sebring back then. replace the
resistor as I stated before

--
Glenn Beasley
Chrysler Tech