A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto newsgroups » Technology
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Does vortec engine mean good?



 
 
Thread Tools Display Modes
  #1  
Old October 26th 05, 03:05 AM
external usenet poster
 
Posts: n/a
Default Does vortec engine mean good?

Hi, I was looking at a minivan - astro or safar. Is the 4.3 Vortec a
good engine? I just see it as a plus in the ads and wanted to know.
Especially since they are higher in miles (at least the ones I can
afford). Thanks.

Ads
  #2  
Old October 26th 05, 03:38 AM
Steve Mackie
external usenet poster
 
Posts: n/a
Default Does vortec engine mean good?

http://en.wikipedia.org/wiki/Vortec

More or less just a trade name.

Steve

> wrote in message
oups.com...
> Hi, I was looking at a minivan - astro or safar. Is the 4.3 Vortec a
> good engine? I just see it as a plus in the ads and wanted to know.
> Especially since they are higher in miles (at least the ones I can
> afford). Thanks.
>



  #3  
Old October 26th 05, 02:54 PM
Don Stauffer
external usenet poster
 
Posts: n/a
Default Does vortec engine mean good?

Steve Mackie wrote:
> http://en.wikipedia.org/wiki/Vortec
>
> More or less just a trade name.
>
> Steve
>
> > wrote in message
> oups.com...
>
>>Hi, I was looking at a minivan - astro or safar. Is the 4.3 Vortec a
>>good engine? I just see it as a plus in the ads and wanted to know.
>>Especially since they are higher in miles (at least the ones I can
>>afford). Thanks.
>>

>
>
>

That's what I thought. However, I have seen a very similar name on
other brands now (something like Vtech). Is GM licensing the technology
to others or is that just someone else using a similar name for similar
technology.

I am under the impression that this is GM's method to ensure lots of
turbulence in the combustion chamber. Is this right?
  #4  
Old October 26th 05, 03:17 PM
Steve Mackie
external usenet poster
 
Posts: n/a
Default Does vortec engine mean good?

> That's what I thought. However, I have seen a very similar name on
> other brands now (something like Vtech). Is GM licensing the technology
> to others or is that just someone else using a similar name for similar
> technology.


VTEC, if that is what you are refering to, is a whole other ball of wax.
VTEC is purely a Honda trademark name, but does mean something; Variable
valve Timing and lift Electronic Control. The actual non-trademark acronym
would be VVT; Variable Valve Timing. Learn all about the differecnt types
and associated trade names he http://en.wikipedia.org/wiki/VVT

> I am under the impression that this is GM's method to ensure lots of
> turbulence in the combustion chamber. Is this right?


I doubt it's nothing more than a trade name, period. Like the way GM says
"Ecotech" or Ford says "PowerStroke" or the way Chrysler now uses the term
"Hemi." Doesn't really say anything about the engine, it's just a name.
(Before this causes a ruckus, look it up. They are no longer true "hemi's".
They are as much of a Hemi as my '95 GM 3.4L DOHC is.)

Steve


  #5  
Old October 26th 05, 03:57 PM
Bruce Chang
external usenet poster
 
Posts: n/a
Default Does vortec engine mean good?


"Steve Mackie" > wrote in message
...
> http://en.wikipedia.org/wiki/Vortec
>
> More or less just a trade name.
>
> Steve
>


Indeed it is more than just a trade name. The Vortec name specifically
refers to the cylinder heads.

This article explains it pretty well:

http://www.chevymania.com/tech/vortec.htm


  #6  
Old October 26th 05, 05:03 PM
Steve
external usenet poster
 
Posts: n/a
Default Does vortec engine mean good?

Steve Mackie wrote:


> (Before this causes a ruckus, look it up. They are no longer true "hemi's".
> They are as much of a Hemi as my '95 GM 3.4L DOHC is.)
>
> Steve


If there are "degrees" of Hemi-ness, then the 426 Hemi wasn't a "true"
one either since the spark plug wasn't quite central and the valve
angles weren't symmetric about the axis of the cylinder, and the last
"true" Hemi was the 1957 392 Hemi.

The modern 5.7 Hemi is "more" of a Hemi than any quad-valve DOHC engine,
though. Quad-valves are pent-roof chambers.


  #7  
Old October 26th 05, 05:20 PM
Steve Mackie
external usenet poster
 
Posts: n/a
Default Does vortec engine mean good?

> > More or less just a trade name.
>
> Indeed it is more than just a trade name. The Vortec name specifically
> refers to the cylinder heads.


Ahhh....pictures help.


  #8  
Old October 26th 05, 05:24 PM
Steve Mackie
external usenet poster
 
Posts: n/a
Default Does vortec engine mean good?

> > (Before this causes a ruckus, look it up. They are no longer true
"hemi's".
> > They are as much of a Hemi as my '95 GM 3.4L DOHC is.)

>
> The modern 5.7 Hemi is "more" of a Hemi than any quad-valve DOHC engine,
> though. Quad-valves are pent-roof chambers.


True, I should have thought it over before typing. My point was, which I
think was conveyed, is that the new 'Hemi' name is more marketing than
design. And as pointed out by a previous poster this is not 100% true of the
'Vortec' brand as I stated earlier.

Steve


  #10  
Old October 26th 05, 07:45 PM
external usenet poster
 
Posts: n/a
Default Does vortec engine mean good?

Are they top heavy? Hard to drive?

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
rec.autos.makers.chrysler FAQ, Part 1/6 Dr. David Zatz Chrysler 5 July 10th 05 05:24 AM
rec.autos.makers.chrysler FAQ, Part 1/6 Dr. David Zatz Chrysler 5 June 24th 05 05:27 AM
rec.autos.makers.chrysler FAQ, Part 1/6 Dr. David Zatz Chrysler 5 June 8th 05 05:28 AM
rec.autos.makers.chrysler FAQ, Part 1/6 Dr. David Zatz Chrysler 5 May 24th 05 05:27 AM
rec.autos.makers.chrysler FAQ, Part 1/6 Dr. David Zatz Chrysler 4 February 2nd 05 06:22 AM


All times are GMT +1. The time now is 11:13 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.