If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
5.9 Hi-Po Intake Manifold
I'm remembring a road test of a Mopar Parts high performance intake manifold
for the 5.9 Magnum engine but can't seem to recall where it was. The test installed the intake in a GC 5.9 and became a tire smoker as a result. Anyone recall the article and, more important, the part number? Thanks in advance. |
Ads |
#2
|
|||
|
|||
5.9 Hi-Po Intake Manifold
Manifolds are designed to make a carburetor come alive:
http://www.edelbrock.com/automotive/...sler.html#7577 Your Grand Cherokee should have electronic fuel injection, so you need to buy or reprogram the chip in your computer: http://www.autoanything.com/shopping...dodge_jet_chip God Bless America, Bill O|||||||O http://www.billhughes.com/ RCSnyder wrote: > > I'm remembring a road test of a Mopar Parts high performance intake manifold > for the 5.9 Magnum engine but can't seem to recall where it was. > > The test installed the intake in a GC 5.9 and became a tire smoker as a > result. > > Anyone recall the article and, more important, the part number? > > Thanks in advance. |
#3
|
|||
|
|||
5.9 Hi-Po Intake Manifold
RCSnyder did pass the time by typing:
> I'm remembring a road test of a Mopar Parts high performance intake manifold > for the 5.9 Magnum engine but can't seem to recall where it was. > > The test installed the intake in a GC 5.9 and became a tire smoker as a > result. > > Anyone recall the article and, more important, the part number? > > Thanks in advance. Like this? http://buymopar.com/store/magnum.html half way down or there abouts. But it's not for your application. I'd write them and ask, if it's a Mopar HighPerformance part they would know. -- DougW |
#4
|
|||
|
|||
5.9 Hi-Po Intake Manifold
I wonder if this engine you mention is similar to the 5.9 that was in the
old Grand Wagoneer? Fred "DougW" > wrote in message news:V7SDf.32981$bF.21819@dukeread07... > RCSnyder did pass the time by typing: >> I'm remembring a road test of a Mopar Parts high performance intake >> manifold >> for the 5.9 Magnum engine but can't seem to recall where it was. >> >> The test installed the intake in a GC 5.9 and became a tire smoker as a >> result. >> >> Anyone recall the article and, more important, the part number? >> >> Thanks in advance. > > Like this? > http://buymopar.com/store/magnum.html > half way down or there abouts. But it's not for your application. > > I'd write them and ask, if it's a Mopar HighPerformance part they would > know. > > -- > DougW > |
#5
|
|||
|
|||
5.9 Hi-Po Intake Manifold
the part number i do not know but the intake is known as the mi intake and it's
recommended to have a new thottle body 65mm i believe and headers to make the intake flow right RCSnyder wrote: > I'm remembring a road test of a Mopar Parts high performance intake manifold > for the 5.9 Magnum engine but can't seem to recall where it was. > > The test installed the intake in a GC 5.9 and became a tire smoker as a > result. > > Anyone recall the article and, more important, the part number? > > Thanks in advance. |
#6
|
|||
|
|||
5.9 Hi-Po Intake Manifold
No relationship whatsoever. The old 360 is the AMC engine while this 5.9 is
pure Mopar. "Fred V." > wrote in message om... >I wonder if this engine you mention is similar to the 5.9 that was in the >old Grand Wagoneer? > Fred > > > > "DougW" > wrote in message > news:V7SDf.32981$bF.21819@dukeread07... >> RCSnyder did pass the time by typing: >>> I'm remembring a road test of a Mopar Parts high performance intake >>> manifold >>> for the 5.9 Magnum engine but can't seem to recall where it was. >>> >>> The test installed the intake in a GC 5.9 and became a tire smoker as a >>> result. >>> >>> Anyone recall the article and, more important, the part number? >>> >>> Thanks in advance. >> >> Like this? >> http://buymopar.com/store/magnum.html >> half way down or there abouts. But it's not for your application. >> >> I'd write them and ask, if it's a Mopar HighPerformance part they would >> know. >> >> -- >> DougW >> > > |
#7
|
|||
|
|||
5.9 Hi-Po Intake Manifold
"RCSnyder" > wrote in message ... > No relationship whatsoever. The old 360 is the AMC engine while this 5.9 > is pure Mopar. and the difference is? |
#8
|
|||
|
|||
5.9 Hi-Po Intake Manifold
everything
Gazoo wrote: > "RCSnyder" > wrote in message > ... > > No relationship whatsoever. The old 360 is the AMC engine while this 5.9 > > is pure Mopar. > > and the difference is? |
#9
|
|||
|
|||
5.9 Hi-Po Intake Manifold
You're probably thinking because Daimler used the Nash six that
they used their V8 too. NOPE! Pictured at: http://www.billhughes.com/temp/mopar59AMC360.jpg AMC has distributor at front. God Bless America, Bill O|||||||O Gazoo wrote: > > and the difference is? |
#10
|
|||
|
|||
5.9 Hi-Po Intake Manifold
> http://www.billhughes.com/temp/mopar59AMC360.jpg AMC has distributor at
> front. Where it should be! |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
AWA [DEMAND] ford 4.6l intake manifold | [email protected] | General | 0 | December 27th 05 12:51 PM |
question about intake manifold & coolant | Scotter | Ford Mustang | 3 | October 22nd 05 02:10 AM |
96 Chev PU Leaking water from intake manifold?? | [email protected] | Technology | 4 | July 6th 05 02:41 PM |
QUESTION: 1996 GT Intake Manifold | EADGBE | Ford Mustang | 3 | June 26th 05 08:43 PM |
1999 3.1 intake manifold replacement questions | [email protected] | Technology | 4 | February 7th 05 09:26 PM |