A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » Chrysler
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Code 905



 
 
Thread Tools Display Modes
  #1  
Old January 13th 07, 02:11 PM posted to rec.autos.makers.chrysler
Corkery11
external usenet poster
 
Posts: 8
Default Code 905

Hi since messing with various electrics in order to fix a starting problem
(thanks again for all the previous replies with regards that issue) I now
have an error 905 on the dashboard diagnostics list. The car is a Grand
Voyager (Town and Country in the states?)3.3 litre auto. I've replaced the
output speed sensor as this seemed to be a possible cause according to some
threads. I've managed to have a look in a Chrysler workshop manual which
states that I need to do a quick learn process and get it coded with a
dealer tool. Is there a way of avoiding another trip to the dealership and
doing this myself, or failing that is it the sort of thing I could reset
with the OBD2 code reader software / tools advertised on the net?
Cheers Mark

Ads
  #2  
Old January 13th 07, 02:43 PM posted to rec.autos.makers.chrysler
maxpower
external usenet poster
 
Posts: 1,573
Default Code 905


"Corkery11" > wrote in message
lkaboutautos.com...
> Hi since messing with various electrics in order to fix a starting problem
> (thanks again for all the previous replies with regards that issue) I now
> have an error 905 on the dashboard diagnostics list. The car is a Grand
> Voyager (Town and Country in the states?)3.3 litre auto. I've replaced the
> output speed sensor as this seemed to be a possible cause according to

some
> threads. I've managed to have a look in a Chrysler workshop manual which
> states that I need to do a quick learn process and get it coded with a
> dealer tool. Is there a way of avoiding another trip to the dealership and
> doing this myself, or failing that is it the sort of thing I could reset
> with the OBD2 code reader software / tools advertised on the net?
> Cheers Mark
>

Starting problem? code 905? Replace speed sensor for a starting problem? I
don't think so!! And even if you replaced the speed sensor for a shifting
problem you wouldn't need a scan tool to relearn anything.

Glenn Beasley
Chrysler Tech


  #3  
Old January 14th 07, 09:51 PM posted to rec.autos.makers.chrysler
Corkery11
external usenet poster
 
Posts: 8
Default Code 905

Thanks for the reply. I should have pointed out that starting is no longer
a problem as it appears that my car was suffering from having a loose
block connector at the rear of the dash / instrument binnacle. I think I
have sorted this out, however in trying to find the problem I was advised
by the dealership that amongst other things it could be a problem with the
immobiliser, the BCM, then the PCM, and eventually the TCM all of which
have been changed (all but the BCM have been changed with second hand
units). When this made no difference they then said I would need to change
the loom which was described as being more than the car was worth. Luckily
this website gave out some alternative suggestions and it was after
playing around with the block mentioned that the starting problem was
resolved.
However I now have code 905 and no speedo, gear selection indicator or
cruise / computer readings. Also the transmission is staying in limp
mode.
One of the threads on this site said it could be the output speed sensor
which seemed a quick, easy and relatively inexpensive option. However
you're right it made no difference. I have now managed to get a look at a
workshop manual which states that error 905 means "No CCD bus messages
from TCM".
The manual also states that TCM's should not be interchanged between
vehicles of different years and even same year vehicle TCM's if replaced
need to be put through a "Quick learn procedure" and "electronic pinion
procedure".
I am therefore unsure of where my problem lies and if it neeeds to go to
the dealer or if there is some way of fixing it myself.
Cheers, Mark

  #4  
Old October 15th 20, 05:31 PM posted to rec.autos.makers.chrysler
Dany Defossez-Anceaux
external usenet poster
 
Posts: 1
Default Code 905

Hello could you be more precise on this famous connector loose at the back of the dashboard? I have a chrysler Voyager S3 2.4L petrol engine which refuses to start yet everything is new .. I do not understand anything ...
excuse my english language, i'm a french ^^

--
For full context, visit https://www.motorsforum.com/chrysler...905-54426-.htm

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
97 Grand - Fault code 12 a problem? Joe_M Jeep 7 July 11th 07 02:12 PM
2001 300m passenger door handle(inside) Fiberman Chrysler 19 March 27th 05 08:33 PM
Graduate Students Unlock Code of 'Thiefproof' Car Key MrPepper11 Technology 14 February 1st 05 11:47 PM
96 coupe 3.8 with code "P1151" Chuck Ford Mustang 2 January 1st 05 07:07 PM


All times are GMT +1. The time now is 02:25 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.