If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
to change a Honda Accord 1988 model timing belt
"TeGGeR®" > wrote in message ...
> I once had one TSB link that led to the wrong TSB. According to my logs, > that TSB was viewed some 50 times, and only ONE person notified me that the > TSB referenced was not the one it should have led to. I thanked him and > changed it immediately. The Pdf http://www.tegger.com/hondafaq/ignit...n-car-test.pdf located here http://www.tegger.com/hondafaq/ignit...r-testing.html contains and display errors. This is what I see. http://img452.imageshack.us/img452/2...cartest5ry.gif I've seen an original PDF like this before but can't say I have since I can't make out exactly what make/model/year the error pdf is from. |
Ads |
#12
|
|||
|
|||
to change a Honda Accord 1988 model timing belt
"Burt S." > wrote in
: > "TeGGeR®" > wrote in message > ... > >> I once had one TSB link that led to the wrong TSB. According to my >> logs, that TSB was viewed some 50 times, and only ONE person notified >> me that the TSB referenced was not the one it should have led to. I >> thanked him and changed it immediately. > > The Pdf > > http://www.tegger.com/hondafaq/ignit...on-car-test.pd > f > > located here > > http://www.tegger.com/hondafaq/ignit...r-testing.html > > contains and display errors. This is what I see. > > http://img452.imageshack.us/img452/2...cartest5ry.gif I think this may have to do with you browser's PDF plugin. The image works fine on the two computers amd 3 browsers I've just tried it on. > > I've seen an original PDF like this before but can't say I have since > I can't make out exactly what make/model/year the error pdf is from. It's a scan of a page from the '91 Integra factory shop manual. -- TeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
#13
|
|||
|
|||
to change a Honda Accord 1988 model timing belt
"TeGGeR®" > wrote
> > I'll put together a site on the crankshaft pulley bolt, temporarily > > post it (like for the next year or so), and you can use it as you > > like. I'll try to make it blend with what you have already at your > > site, so you can copy and paste as easily as possible. > > If you set up your own site on that, I'll link to it in the FAQ. Here is my nauseously detailed discussion of crankshaft pulleys and holder tools and oil in spark plug tubes. http://home.earthlink.net/~honda.lioness/index.html Pithy suggested changes are welcome. |
#14
|
|||
|
|||
to change a Honda Accord 1988 model timing belt
"Elle" > wrote in
ink.net: > "TeGGeR®" > wrote > > > I'll put together a site on the crankshaft pulley bolt, > > > temporarily >> > post it (like for the next year or so), and you can use it as you >> > like. I'll try to make it blend with what you have already at your >> > site, so you can copy and paste as easily as possible. >> >> If you set up your own site on that, I'll link to it in the FAQ. > > Here is my nauseously detailed discussion of crankshaft pulleys and > holder tools and oil in spark plug tubes. > > http://home.earthlink.net/~honda.lioness/index.html > > Pithy suggested changes are welcome. > > > > I'll check it out later, thanks for putting that up. -- TeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
#15
|
|||
|
|||
to change a Honda Accord 1988 model timing belt
"TeGGeR®" > wrote in message ...
> I think this may have to do with you browser's PDF plugin. The image works > fine on the two computers amd 3 browsers I've just tried it on. I'd recompressed the file to 136KB (originally 336KB) and reconvert it to PDF 4 which should work on old or new PDF viewers. Certain old pdf viewers have speed.) If you like you can download the 91 Integra igniter input test PDF here http://zupload.com/file.php?filepath=29622 or here. Should work on most PDF viewers. http://zupload.com/download.php?file...filepath=29622 Notice that this is an "igniter input test." This test won't test the life of the igniter. Best to label the link as "igniter input test" but not "igniter test." |
#16
|
|||
|
|||
to change a Honda Accord 1988 model timing belt
"Burt S." > wrote in
t: > "TeGGeR®" > wrote in message > ... > >> I think this may have to do with you browser's PDF plugin. The image >> works fine on the two computers amd 3 browsers I've just tried it on. > > I'd recompressed the file to 136KB (originally 336KB) and reconvert > it to PDF 4 which should work on old or new PDF viewers. Certain > old pdf viewers have speed.) If you like you can download the 91 > Integra igniter input test PDF here > > http://zupload.com/file.php?filepath=29622 > > or here. Should work on most PDF viewers. > > http://zupload.com/download.php?file...filepath=29622 > > Notice that this is an "igniter input test." This test won't test the > life of the igniter. Best to label the link as "igniter input test" > but not "igniter test." > > > I /thought/ that was the "on car" test. Is there another on-test that will check for functionality similarly to the off-car test? Or should I just label the PDF as being a /limited/ on-car test that tests input only, and state that for proper testing the igniter must be removed from the car? -- TeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
#17
|
|||
|
|||
to change a Honda Accord 1988 model timing belt
TeGGeR® wrote:
> "Burt S." > wrote in > t: > > >>"TeGGeR®" > wrote in message ... >> >> >>>I think this may have to do with you browser's PDF plugin. The image >>>works fine on the two computers amd 3 browsers I've just tried it on. >> >>I'd recompressed the file to 136KB (originally 336KB) and reconvert >>it to PDF 4 which should work on old or new PDF viewers. Certain >>old pdf viewers have speed.) If you like you can download the 91 >>Integra igniter input test PDF here >> >>http://zupload.com/file.php?filepath=29622 >> >>or here. Should work on most PDF viewers. >> >>http://zupload.com/download.php?file...filepath=29622 >> >>Notice that this is an "igniter input test." This test won't test the >>life of the igniter. Best to label the link as "igniter input test" >>but not "igniter test." >> >> >> > > > > I /thought/ that was the "on car" test. Is there another on-test that will > check for functionality similarly to the off-car test? > > Or should I just label the PDF as being a /limited/ on-car test that tests > input only, and state that for proper testing the igniter must be removed > from the car? > you can do the dwell meter test for the igniter on the car. for mine, i just figured taking it out allowed me to clean everything up and generally poke about. |
#18
|
|||
|
|||
to change a Honda Accord 1988 model timing belt
"TeGGeR®" > wrote in message ...
> I /thought/ that was the "on car" test. Is there another on-test that will > check for functionality similarly to the off-car test? There are no official "on car test" PDF that I can find, not one from Toyota or Honda. > Or should I just label the PDF as being a /limited/ on-car test that tests > input only, Yes. > and state that for proper testing the igniter must be removed > from the car? Yes, however an on car is also possible, but is not the safest approach considering the various sensitive electronics nearby. |
#19
|
|||
|
|||
to change a Honda Accord 1988 model timing belt
"jim beam" > wrote in message ...
> you can do the dwell meter test for the igniter on the car. for mine, i > just figured taking it out allowed me to clean everything up and > generally poke about. ....and don't forget the quality grade conducting grease. :~) If you're referring to a dwell meter test like this link http://www.tegger.com/hondafaq/startproblems.html#bad then it isn't accurate for testing the igniter. Quote: "Crank the engine: No dwell, bad igniter..." should be, "Crank the engine: No dwell, likely a bad igniter." |
#20
|
|||
|
|||
to change a Honda Accord 1988 model timing belt
TeGGeR® wrote:
> You find mistakes? TELL ME. I NEED submissions. I only have one car myself. > Any other experiences I have come from working on others' cars, or from > submissions I receive from others. I have NO ego and a very thick skin. > I've been on Usenet for quite a few years and am very used to criticism > and MORE than eager to fix mistakes. Have you ever thought of setting the site up using a "Wiki" back-end? Might make ongoing maintenance easier, and add better support for searching and indexing and such. --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 0543-2, 10/27/2005 Tested on: 10/28/2005 7:50:05 AM avast! - copyright (c) 1988-2005 ALWIL Software. http://www.avast.com |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Replacing Timing belt 1986 Honda Accord LX | [email protected] | Honda | 5 | August 9th 05 12:18 AM |
Toyota Tacoma timing belt change? | [email protected] | Technology | 2 | April 25th 05 09:45 PM |
Need Advice On 1988 Beloved Honda Accord | Tazzy_Gal | Technology | 11 | April 2nd 05 05:34 AM |
98 honda prelude - timing belt quest. | cr4wley | Technology | 2 | January 15th 05 11:26 PM |
Cost of timing belt change? | Prometheus7 | Mazda | 1 | October 14th 04 04:55 PM |