If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Intake manifold
This is kind of follow up to previous posting. I've got 98' Expl. 4.0L , OHV
only in a morning when start the engine and put shift lever on reverse or drive it died immediately, if I let it run for 30sec. it wont die. I replace EGR , IAC valve and Upper intake manifold gasket. Any ideas where to look? Thanks Dosio |
Ads |
#2
|
|||
|
|||
Intake manifold
On Mon, 5 Feb 2007 20:29:04 -0800, "dosio" >
wrote: >This is kind of follow up to previous posting. I've got 98' Expl. 4.0L , OHV >only in a morning when start the engine and put shift lever on reverse or >drive it died immediately, if I let it run for 30sec. it wont die. I replace >EGR , IAC valve and Upper intake manifold gasket. Any ideas where to look? >Thanks >Dosio > The lower manifold gaskets need to be replaced also. The 00M12 tsb is for upper, lower manifold gasket replacement and also cam chain tensioner replacement. If you don't need the tensioner, just follow the tsb as far as lower manifold gasket replacement. That should fix the cold weather idle problem. Also cleaning /lubricating the IAC is not a good idea. Since you replaced yours it should last 5 years or more. http://www.siriusnet.net/fordexplorer/tsb-00M12.pdf Roy |
#3
|
|||
|
|||
Intake manifold
On Feb 12, 9:44 pm, Dufey > wrote:
> On Mon, 5 Feb 2007 20:29:04 -0800, "dosio" > > wrote: > > >This is kind of follow up to previous posting. I've got 98' Expl. 4.0L , OHV > >only in a morning when start the engine and put shift lever on reverse or > >drive it died immediately, if I let it run for 30sec. it wont die. I replace > >EGR , IAC valve and Upper intake manifold gasket. Any ideas where to look? > >Thanks > >Dosio > > The lower manifold gaskets need to be replaced also. The 00M12 tsb is > for upper, lower manifold gasket replacement and also cam chain > tensioner replacement. That TSB only applies to the 4.0L SOHC engine, he says he has the 4.0L OHV engine which doesn't have the cam chain problems. -Paul |
#4
|
|||
|
|||
Intake manifold
On 12 Feb 2007 21:56:43 -0800, "Paul G." > wrote:
>On Feb 12, 9:44 pm, Dufey > wrote: >> On Mon, 5 Feb 2007 20:29:04 -0800, "dosio" > >That TSB only applies to the 4.0L SOHC engine, he says he has the 4.0L >OHV engine which doesn't have the cam chain problems. >-Paul Geez, I didn't even see OHV. Thanx for the correction Paul. Roy |
#5
|
|||
|
|||
Intake manifold
On Mon, 5 Feb 2007 20:29:04 -0800, "dosio" >
wrote: >This is kind of follow up to previous posting. I've got 98' Expl. 4.0L , OHV >only in a morning when start the engine and put shift lever on reverse or >drive it died immediately, if I let it run for 30sec. it wont die. I replace >EGR , IAC valve and Upper intake manifold gasket. Any ideas where to look? >Thanks >Dosio > here is a link to download the factory service manual and diagnostics on cd. you must name the cd 98TRK08 for it to work. http://www.fordcds.com/ Roy |
#6
|
|||
|
|||
Intake manifold
On Feb 12, 10:13 pm, Dufey > wrote:
> > here is a link to download the factory service manual and diagnostics > on cd. you must name the cd 98TRK08 for it to work. > > http://www.fordcds.com/ > > Roy Hey thanks!!! I had already bought one on Ebay for my Explorer, but I got one for my daughter's Taurus. That's faq material. -Paul |
#7
|
|||
|
|||
Intake manifold
[Sorry if duplicate post - I have been having trouble getting to this
group for several days.] Dufey wrote: > > here is a link to download the factory service manual and diagnostics > on cd. you must name the cd 98TRK08 for it to work. > > http://www.fordcds.com/ That's an interesting link. I visited the site, and went through the agony of downloading one of the big iso files using Bit Trickle. Once I got the entire 5.5 GB on my machine, I bought a double-layer DVD ('spensive!) and burned it. And now, after all that, it doesn't seem to work. The problem is that it isn't simply a manual or a big data collection. Instead, there is a Setup.exe file that installs a viewer or shell on your computer, and as part of that process, you have to provide a 5-digit PACODE (Parts and Accessories Code) of some kind. For some of the info, it also seems to want an OASIS number. Sure wish I had known this before I started the whole process. Has anyone else had better luck with this? Am I doing something wrong? Thanks Bill Jeffrey |
#8
|
|||
|
|||
Intake manifold
On Feb 20, 11:00 am, Bill Jeffrey > wrote:
> [Sorry if duplicate post - I have been having trouble getting to this > group for several days.] > > Dufey wrote: > > > > > here is a link to download the factory service manual and diagnostics > > on cd. you must name the cd 98TRK08 for it to work. > > > >http://www.fordcds.com/ > > That's an interesting link. I visited the site, and went through the > agony of downloading one of the big iso files using Bit Trickle. Once I > got the entire 5.5 GB on my machine, I bought a double-layer DVD > ('spensive!) and burned it. And now, after all that, it doesn't seem to > work. The problem is that it isn't simply a manual or a big data > collection. Instead, there is a Setup.exe file that installs a viewer or > shell on your computer, and as part of that process, you have to provide > a 5-digit PACODE (Parts and Accessories Code) of some kind. For some of > the info, it also seems to want an OASIS number. > > Sure wish I had known this before I started the whole process. Has > anyone else had better luck with this? Am I doing something wrong? > I downloaded a CD image for 2001 cars. That worked perfectly. So I can't say about the DVD images. -Paul |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
QUESTION: 1996 Ford 4.6L Intake Manifold | EADGBE | Technology | 2 | June 29th 06 12:18 AM |
Lower Intake Manifold Success Story | Jimmy the Hand | Ford Explorer | 0 | June 21st 06 10:18 PM |
Cracked intake manifold - How do I get my reimbursement? | Erik Hovind | Ford Mustang | 1 | February 18th 06 11:00 PM |
QUESTION: 1996 GT Intake Manifold | EADGBE | Ford Mustang | 3 | June 26th 05 08:43 PM |