A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » Jeep
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

5.9 Hi-Po Intake Manifold



 
 
Thread Tools Display Modes
  #1  
Old January 31st 06, 03:35 AM posted to rec.autos.makers.jeep+willys
external usenet poster
 
Posts: n/a
Default 5.9 Hi-Po Intake Manifold

I'm remembring a road test of a Mopar Parts high performance intake manifold
for the 5.9 Magnum engine but can't seem to recall where it was.

The test installed the intake in a GC 5.9 and became a tire smoker as a
result.

Anyone recall the article and, more important, the part number?

Thanks in advance.


Ads
  #2  
Old January 31st 06, 09:21 PM posted to rec.autos.makers.jeep+willys
external usenet poster
 
Posts: n/a
Default 5.9 Hi-Po Intake Manifold

Manifolds are designed to make a carburetor come alive:
http://www.edelbrock.com/automotive/...sler.html#7577 Your Grand
Cherokee should have electronic fuel injection, so you need to buy or
reprogram the chip in your computer:
http://www.autoanything.com/shopping...dodge_jet_chip
God Bless America, Bill O|||||||O
http://www.billhughes.com/

RCSnyder wrote:
>
> I'm remembring a road test of a Mopar Parts high performance intake manifold
> for the 5.9 Magnum engine but can't seem to recall where it was.
>
> The test installed the intake in a GC 5.9 and became a tire smoker as a
> result.
>
> Anyone recall the article and, more important, the part number?
>
> Thanks in advance.

  #3  
Old February 1st 06, 12:10 AM posted to rec.autos.makers.jeep+willys
external usenet poster
 
Posts: n/a
Default 5.9 Hi-Po Intake Manifold

RCSnyder did pass the time by typing:
> I'm remembring a road test of a Mopar Parts high performance intake manifold
> for the 5.9 Magnum engine but can't seem to recall where it was.
>
> The test installed the intake in a GC 5.9 and became a tire smoker as a
> result.
>
> Anyone recall the article and, more important, the part number?
>
> Thanks in advance.


Like this?
http://buymopar.com/store/magnum.html
half way down or there abouts. But it's not for your application.

I'd write them and ask, if it's a Mopar HighPerformance part they would know.

--
DougW


  #4  
Old February 2nd 06, 02:35 AM posted to rec.autos.makers.jeep+willys
external usenet poster
 
Posts: n/a
Default 5.9 Hi-Po Intake Manifold

I wonder if this engine you mention is similar to the 5.9 that was in the
old Grand Wagoneer?
Fred



"DougW" > wrote in message
news:V7SDf.32981$bF.21819@dukeread07...
> RCSnyder did pass the time by typing:
>> I'm remembring a road test of a Mopar Parts high performance intake
>> manifold
>> for the 5.9 Magnum engine but can't seem to recall where it was.
>>
>> The test installed the intake in a GC 5.9 and became a tire smoker as a
>> result.
>>
>> Anyone recall the article and, more important, the part number?
>>
>> Thanks in advance.

>
> Like this?
> http://buymopar.com/store/magnum.html
> half way down or there abouts. But it's not for your application.
>
> I'd write them and ask, if it's a Mopar HighPerformance part they would
> know.
>
> --
> DougW
>



  #5  
Old February 2nd 06, 03:48 AM posted to rec.autos.makers.jeep+willys
external usenet poster
 
Posts: n/a
Default 5.9 Hi-Po Intake Manifold

the part number i do not know but the intake is known as the mi intake and it's
recommended to have a new thottle body 65mm i believe and headers to make the
intake flow right

RCSnyder wrote:

> I'm remembring a road test of a Mopar Parts high performance intake manifold
> for the 5.9 Magnum engine but can't seem to recall where it was.
>
> The test installed the intake in a GC 5.9 and became a tire smoker as a
> result.
>
> Anyone recall the article and, more important, the part number?
>
> Thanks in advance.


  #6  
Old February 2nd 06, 04:28 AM posted to rec.autos.makers.jeep+willys
external usenet poster
 
Posts: n/a
Default 5.9 Hi-Po Intake Manifold

No relationship whatsoever. The old 360 is the AMC engine while this 5.9 is
pure Mopar.


"Fred V." > wrote in message
om...
>I wonder if this engine you mention is similar to the 5.9 that was in the
>old Grand Wagoneer?
> Fred
>
>
>
> "DougW" > wrote in message
> news:V7SDf.32981$bF.21819@dukeread07...
>> RCSnyder did pass the time by typing:
>>> I'm remembring a road test of a Mopar Parts high performance intake
>>> manifold
>>> for the 5.9 Magnum engine but can't seem to recall where it was.
>>>
>>> The test installed the intake in a GC 5.9 and became a tire smoker as a
>>> result.
>>>
>>> Anyone recall the article and, more important, the part number?
>>>
>>> Thanks in advance.

>>
>> Like this?
>> http://buymopar.com/store/magnum.html
>> half way down or there abouts. But it's not for your application.
>>
>> I'd write them and ask, if it's a Mopar HighPerformance part they would
>> know.
>>
>> --
>> DougW
>>

>
>



  #7  
Old February 2nd 06, 05:01 AM posted to rec.autos.makers.jeep+willys
external usenet poster
 
Posts: n/a
Default 5.9 Hi-Po Intake Manifold


"RCSnyder" > wrote in message
...
> No relationship whatsoever. The old 360 is the AMC engine while this 5.9
> is pure Mopar.



and the difference is?


  #8  
Old February 3rd 06, 12:03 AM posted to rec.autos.makers.jeep+willys
external usenet poster
 
Posts: n/a
Default 5.9 Hi-Po Intake Manifold

everything

Gazoo wrote:

> "RCSnyder" > wrote in message
> ...
> > No relationship whatsoever. The old 360 is the AMC engine while this 5.9
> > is pure Mopar.

>
> and the difference is?


  #9  
Old February 3rd 06, 12:30 AM posted to rec.autos.makers.jeep+willys
external usenet poster
 
Posts: n/a
Default 5.9 Hi-Po Intake Manifold

You're probably thinking because Daimler used the Nash six that
they used their V8 too. NOPE! Pictured at:
http://www.billhughes.com/temp/mopar59AMC360.jpg AMC has distributor at
front.
God Bless America, Bill O|||||||O


Gazoo wrote:
>
> and the difference is?

  #10  
Old February 3rd 06, 01:28 AM posted to rec.autos.makers.jeep+willys
external usenet poster
 
Posts: n/a
Default 5.9 Hi-Po Intake Manifold

> http://www.billhughes.com/temp/mopar59AMC360.jpg AMC has distributor at
> front.


Where it should be!


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
AWA [DEMAND] ford 4.6l intake manifold [email protected] General 0 December 27th 05 01:51 PM
question about intake manifold & coolant Scotter Ford Mustang 3 October 22nd 05 02:10 AM
96 Chev PU Leaking water from intake manifold?? [email protected] Technology 4 July 6th 05 02:41 PM
QUESTION: 1996 GT Intake Manifold EADGBE Ford Mustang 3 June 26th 05 08:43 PM
1999 3.1 intake manifold replacement questions [email protected] Technology 4 February 7th 05 10:26 PM


All times are GMT +1. The time now is 12:06 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.