If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
thumping noise during turns - not cv joint
I've got a 96 Accord that I've been fixing up for a friend that has a odd
thumping noise during left turns. I figured it was CV joint related since both were blown on the outer boots, but the nooise hasnt changed at all. It developed shortly after replacing the lowering springs that came on the car with the orginal stockers. Visually I cant see anything wrong except for a strut bar bushing thats cracked on the left side and a cracked front engine mount. Neither are severe enough to be causing this noise (I think??). The noise seems to occur on 90 deg left turns only while the wheel is straightening back out. Rarely does it occur while turning the wheel left. Noise isnt speed dependent and just sounds like a metal on metal clunk coming from the engine compartment. I've gone over all the suspension and all the components are tight and in good shape sans the sway bar bushing. Any thoughts?? thanks!! jeff |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
rec.autos.makers.chrysler FAQ, Part 1/6 | Dr. David Zatz | Chrysler | 5 | March 21st 05 05:33 AM |
rec.autos.makers.chrysler FAQ, Part 1/6 | Dr. David Zatz | Chrysler | 10 | December 2nd 04 05:19 AM |
New *FREE* Corvette Discussion Forum | JLA ENTERPRISES TECHNOLOGIES INTEGRATION | Corvette | 12 | November 30th 04 06:36 PM |
rec.autos.makers.chrysler FAQ, Part 1/6 | Dr. David Zatz | Chrysler | 10 | November 16th 04 05:28 AM |
rec.autos.makers.chrysler FAQ, Part 1/6 | Dr. David Zatz | Chrysler | 10 | October 16th 04 05:28 AM |