If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
The Continuing Story of FFB (episode 136)
Well, I corrected some things. The FOV and screen hight were wrong.
FOV was 61, and should have been 57, while screen hight was 0.147000 (7.35%), while it should have been 0.141488 (7.0744%). It looks like FFB settings should be the default ones, so now I have 118/100/100/100. All this is just right, I don't know if there is something to be improved, but I'll try to find out (I'll again take a look at cockpitLookDeadZone). |
Ads |
#2
|
|||
|
|||
The Continuing Story of FFB (episode 136)
Mario Petrinovic:
> Well, I corrected some things. The FOV and screen hight were wrong. > FOV was 61, and should have been 57, while screen hight was 0.147000 > (7.35%), while it should have been 0.141488 (7.0744%). > It looks like FFB settings should be the default ones, so now I > have > 118/100/100/100. > All this is just right, I don't know if there is something to be > improved, but I'll try to find out (I'll again take a look at > cockpitLookDeadZone). Ok, cockpitLookDeadZone is 0.013244. |
#3
|
|||
|
|||
The Continuing Story of FFB (episode 136)
Mario Petrinovic:
> Mario Petrinovic: >> Well, I corrected some things. The FOV and screen hight were >> wrong. >> FOV was 61, and should have been 57, while screen hight was 0.147000 >> (7.35%), while it should have been 0.141488 (7.0744%). >> It looks like FFB settings should be the default ones, so now I >> have 118/100/100/100. >> All this is just right, I don't know if there is something to be >> improved, but I'll try to find out (I'll again take a look at >> cockpitLookDeadZone). > > Ok, cockpitLookDeadZone is 0.013244. Ok, I've been busy. Becuase I've set the perspective (screen hight) and latency (cockpitLookDeadZone), I've finaly found out the correct way to set FFB. All four have to be the same. So, now my settings are 117/117/117/117. Also, I figured out how FOV affects FFB. Too low FOV and FFB is too tight, car wants to snap out. Too high FOV and you get slack. My FOV is somewhere between 61 and 62. Too bad you cannot set it more precisely in iRacing. But, I also found out that, if you set Spring and Damper too low, you get slack. I didin't have time today, I'll continue tomorow, but I presume that also, if you set Spring and Damper too high, car gets too tight. So, tomorow I'll see if you can correct incorrect FOV by rising and lowering Spring and Damper. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to balance FFB | Mario Petrinovic | Simulators | 30 | January 28th 12 08:16 AM |
FFB (so far) | Mario Petrinovic | Simulators | 0 | September 25th 11 10:57 AM |
FFB | Mario Petrinovic | Simulators | 26 | September 5th 11 08:52 AM |
Secrets of FFB | Mario Petrinovic | Simulators | 2 | August 4th 11 06:10 PM |
G25 v. ECCI - To FFB or not to FFB | [email protected] | Simulators | 1 | August 17th 07 02:35 PM |